SBS - The Best Value in QMS software

Has anyone used Mango as their Quality Software?

D

DeviceMaker

#1
I have been looking at Mango (www.mangolive.com) recently as a relatively low cost SaaS option for our quality system. Does anyone have experience with this system? Thanks in advance.:)
 
Elsmar Forum Sponsor
B

BobKelpy

#4
Hi there - yes. It's very intuitive and the modules 'talk to each other' really nicely. Plus, the support team are really helpful and knowledgeable. It could be a good option for you.
 

harry

Super Moderator
#5
Hi there - yes. It's very intuitive and the modules 'talk to each other' really nicely. Plus, the support team are really helpful and knowledgeable. It could be a good option for you.
Welcome Bob,

Are those your experiences or do you work for them or are in any other ways related to them?
 
D

DeviceMaker

#6
Thank you very much. In the interim, I have decided to go with another piece of software. It is called Qualtrax and it seems like good software. I have been using it for a month now, still getting used to it. We have no internal IT support so I am learning more of the back-end than I wanted but that was part of keeping the cost low. I am not connected with the company, just looked at a whole bunch of options and it met the vast majority of mine. I would be happy to answer any direct questions on it - if popular, I am sure the moderators could start a new thread.:)
 
B

BobKelpy

#7
Sounds good. I'm not familiar with Qualtrax but will check it out. All the best, Bob
 

howste

Thaumaturge
Super Moderator
#8
Welcome Bob,

Are those your experiences or do you work for them or are in any other ways related to them?
*** Moderator's Warning ***

The forum Terms of Service (TOS) state that if you are in any way 'related' to a product under discussion, it is required that you state your relationship. Bob has ignored a request by a moderator to clarify his relationship with the Mango product. The moderators believe that Bob's organization does have a relationship with Mango. Please keep this in mind as you consider his endorsement of the product.
 
B

BobKelpy

#9
Sorry, don't really get your question. Of course I have a relationship with them as a customer; otherwise how would I know their solution.
 

Marc

Fully vaccinated are you?
Staff member
Admin
#10
You have only posted 3 posts so far. We are wary of what we call forum spammers here. We want to ensure people know if someone recommends something here it is because they personally use it and that there is no conflict of interest. There are many web sites that have product and/or services reviews which, to put it bluntly, are fakes.

It *appears* that your company partners with Mango which, if it is the case, appears to be a conflict of interest which was not made clear in your post as required by the ToS. This is the reason we ask.
 
Thread starter Similar threads Forum Replies Date
K Has anyone used QAI for training? Training - Internal, External, Online and Distance Learning 7
GStough Rx-360 - Has Anyone Used This and What Was Your Experience? Supplier Quality Assurance and other Supplier Issues 3
G Has anyone used shlomo Aviv-lean consultant? Lean in Manufacturing and Service Industries 1
M Has anyone used SGS as a CB (Certification Body)? Registrars and Notified Bodies 4
B Has anyone used Arena Software Simulation? Process Maps, Process Mapping and Turtle Diagrams 10
C Has anyone used GageWare Software? Quality Assurance and Compliance Software Tools and Solutions 4
M Has anyone used "Paradigm 3" software to Control their Quality or Management System? Quality Tools, Improvement and Analysis 2
S Cappsnt Software - Has anyone ever used Cappsnt software for a CMM? General Measurement Device and Calibration Topics 1
A Online Internet Training question - Has anyone used AccelCert Training - Internal, External, Online and Distance Learning 11
V Has anyone used Empower (Calibration/Metrology software)? Calibration and Metrology Software and Hardware 2
D Has anyone used ExtraView software in FDA regulated industry? Qualification and Validation (including 21 CFR Part 11) 3
M Has anyone used Quality Software from ION called Simple Trak Quality Assurance and Compliance Software Tools and Solutions 7
Ajit Basrur Has anyone used the "Certification Totals" feature on ANAB Website ? Registrars and Notified Bodies 9
Q The Thomas Institute - Has anyone heard of or used the Thomas Institute? Professional Certifications and Degrees 5
M Has anyone used CalWorks Calibration Software? Calibration and Metrology Software and Hardware 13
D TBM Consultants - Has anyone used them? Lean in Manufacturing and Service Industries 2
T Has anyone heard of or used ITAZ doQuments for document control? Document Control Systems, Procedures, Forms and Templates 1
Marc Has anyone used ultrasonic or laser measurement devices for use in the home? After Work and Weekend Discussion Topics 10
C Feedback on Registrar - Has anyone used the services of QMI? Registrars and Notified Bodies 4
MarilynJ6354 Satmetrix Net Promoter - Has anyone used this for analyzing customer survey data? Service Industry Specific Topics 4
A ProE for PPAP - Has anyone used ProE modelling tool during PPAP submission? Quality Assurance and Compliance Software Tools and Solutions 1
J Has anyone ever used a Management Representative Committee for their QMS? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
J TS 16949 - Has anyone used this form for your COPS, MOPS & SOPS? Document Control Systems, Procedures, Forms and Templates 4
O Has anyone used Q-Pulse QA Software by Gael Quality? Quality Assurance and Compliance Software Tools and Solutions 1
M Has anyone has been through an MDR audit? (3/2020) EU Medical Device Regulations 1
M Has anyone heard of Run at Risk? Manufacturing and Related Processes 15
B ASA Aviation Supply Association - Has anyone heard of ASA? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
B Has anyone done an IEC 60601-1 gap analysis to IEC 60335? Medical Device and FDA Regulations and Standards News 4
D Has anyone had sudden challenges from Korea-MFDS? Other Medical Device Regulations World-Wide 1
D FDA Biomarker Qualification Program - Has anyone prepared an application? Medical Device and FDA Regulations and Standards News 0
L Has anyone heard of the 2 pan system? Manufacturing and Related Processes 6
M Has anyone here assessed the latest Abbreviated 510(K) guidance document? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
M Does anyone has a good verification and validation plan template? ISO 13485:2016 - Medical Device Quality Management Systems 3
D Has anyone undergone a BARDA (HHS) audit as part of their grant process? Other Medical Device Regulations World-Wide 0
Sidney Vianna LinkedIn bug - Anyone has any idea of how to fix this? Posts not showing for me in a Group feed. Coffee Break and Water Cooler Discussions 2
D Has anyone here had any experience with PQ-FMEA software? FMEA and Control Plans 1
S Has anyone completed IATF 16949 Certification - Share your Audit Experience? IATF 16949 - Automotive Quality Systems Standard 2
S Has anyone created a Turtle Diagram reflecting the new ISO 9001:2015 Structure? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
M Has anyone done a Gage R&R for Spectrophotometer? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
T Has anyone completed the AS9100D Quality Manual transition? Quality Management System (QMS) Manuals 1
D Has anyone taken the AS9100 Delta course / exam? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 37
D Medica show in Dusseldorf - Has anyone else gone? Other Medical Device and Orthopedic Related Topics 3
A AS9100C to D - Has anyone done a gap analysis? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
T Has anyone been through the ISO 14001:2015 process? ISO 14001:2015 Specific Discussions 12
Marc Has anyone here gotten Gigabyte Fiberoptics (Internet) to home? Coffee Break and Water Cooler Discussions 3
M Has anyone had their electronic system scrutinized in an FDA inspection? Records and Data - Quality, Legal and Other Evidence 16
P Has anyone ever heard of the Eastern Weighing and Inspection Bureau? Calibration and Metrology Software and Hardware 1
M Has anyone successfully challenged the new IATF site extension change? IATF 16949 - Automotive Quality Systems Standard 36
R Does anyone know why the TC 176 website has been hijacked by CSA? ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 1
A Has anyone made an ISO9001:2015 vs. ISO9001:2008 Matrix ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 32

Similar threads

Top Bottom