Help defining Eyewear Customer Complaint Categories

R

ramkannan13

#1
Dear Forum members,

I would really appreciate if you can give some complaint category to help me write in my procedure.

Industry : Eyewear

Eg) Complaint for defects like Performance , Effectiveness, Safety ...but if some one can give me a list of defect and the way it can be grouped under the Complaint category . I greatly appreciate, your help!

Thanks
RK:thanx:
 
Elsmar Forum Sponsor

somashekar

Staff member
Admin
#2
Welcome to the Cove Ramkannan.
Can you be more specific in your asking.
Are you seeking to have a defectives list catagorized in some way for your internal inspection requirements ?
I do now understand why you have to define Eyewear Customer Complaint Categories. It is for the customer to say the complaint and you make judgement based on the complaint assessment.
Are you by chance asking about risk assessment ?
 

harry

Trusted Information Resource
#3
Dear Forum members,

I would really appreciate if you can give some complaint category to help me write in my procedure.

Industry : Eyewear ...................................
Welcome to the Cove.

One of the biggest mistake some users made for this kind of issue is to come to the Cove for opinions or answers from people of different culture and background, from countries with different level of development and hence perception and requirement and then try to fit these into their situation.

The better approach is to check your organizations records if any, interview the people who deal with customers or interview customers directly to find out the range of complaints and then segregate them into appropriate categories.
 
R

ramkannan13

#4
Hello Somashekar,

Thanks for the prompt response. Yes, you are right its for the customer to say complaint . I have already made a list of category under Quality, Durability, Cosmetics, Effectiveness , Performance etc...say for instance we can take Effectiveness and Peformance. when a customer says its Focusing is not correct then there is a confusion whether its under a Effectiveness category or Performnce because they are close to eachother...this is where I need clarification.

I have made a list of things under each category but its confusing in certain case to group because the one is the effect of other.

Need some clarification on this regards!

Thanks,
RK
 
R

ramkannan13

#5
Welcome to the Cove.

One of the biggest mistake some users made for this kind of issue is to come to the Cove for opinions or answers from people of different culture and background, from countries with different level of development and hence perception and requirement and then try to fit these into their situation.

The better approach is to check your organizations records if any, interview the people who deal with customers or interview customers directly to find out the range of complaints and then segregate them into appropriate categories.
Hi Harry,

Thanks ..you are absoultely right !

In my case its for the product to be launched in the market, I am preparing myself with proper complaint system, but I am sure as we launch and in the months to come we can take the customer response like you mentioned.

Cheers.
 

somashekar

Staff member
Admin
#6
Hello Somashekar,

Thanks for the prompt response. Yes, you are right its for the customer to say complaint . I have already made a list of category under Quality, Durability, Cosmetics, Effectiveness , Performance etc...say for instance we can take Effectiveness and Peformance. when a customer says its Focusing is not correct then there is a confusion whether its under a Effectiveness category or Performnce because they are close to eachother...this is where I need clarification.

I have made a list of things under each category but its confusing in certain case to group because the one is the effect of other.

Need some clarification on this regards!

Thanks,
RK
I would include catagories like Asthetics, Performance, Mechanical, Packaging, and remove words like Quality, Durability, effectiveness etc., for getting clarity of a customer complaint.
 
Thread starter Similar threads Forum Replies Date
R Need help on defining scope for Design Verification File for Class III IVD 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
N Defining Security Interfaces for Scope for ISMS - Need help IEC 27001 - Information Security Management Systems (ISMS) 10
T Help needed for defining quality measurements for our quality report ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
S Need help in defining a World Class Certified Workcentre Manufacturing and Related Processes 3
E Defining Special Characteristics and Control Plan - Welding Operation - Need help Document Control Systems, Procedures, Forms and Templates 7
M Nonconforming Product NIGHTMARE HELP :) Defining What Nonconforming Product Is ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
R Need help on calibration result analysis Measurement Uncertainty (MU) 0
S Help in SMART goals AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
Vader22 IATF 16949 extended manufacturing site help IATF 16949 - Automotive Quality Systems Standard 2
G Need Help with Run @ Rate for Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 0
F Need help in IMS management review Management Review Meetings and related Processes 3
A Please Help With EOQ Calculation Manufacturing and Related Processes 2
S Help needed in choosing the method of calculating the minimum sample size Internal Auditing 12
D IATF 16949 Certification and Letter of Conformance expiry (Help!!!) IATF 16949 - Automotive Quality Systems Standard 8
S I need help in corrective action plan Nonconformance and Corrective Action 15
S Help in document control procedure Document Control Systems, Procedures, Forms and Templates 8
D Weird spec sheet - need help Measurement Uncertainty (MU) 3
Edward Reesor ISO 19223 Discussion (Help) Other Medical Device Related Standards 1
J Help to understand and response to API AAR during the re-certification audit Oil and Gas Industry Standards and Regulations 17
S NC and Deviation approach - please help Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 12
K Need Help With Auditing Suppliers Against ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 50
R Lead auditor scenario (Need help) is this non conforming to ISO13485 Manufacturing and Related Processes 2
J HELP NEEDED ! Risk Management Exercise ISO 14971 - Medical Device Risk Management 12
D Help Me. Non conformitty in External Audit IATF 16949 - Automotive Quality Systems Standard 13
U Need Help With API Q2 Quality Manual Oil and Gas Industry Standards and Regulations 8
A Nonconformity help IATF 16949 - Automotive Quality Systems Standard 5
J ISO 9001:2015 Clause 8.5.1 Control of Production and service provision - Help with Work Instruction Access ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
Azaarus Help with CAPA for an IATF finding regarding inspection documentation IATF 16949 - Automotive Quality Systems Standard 10
A Help needed with locating conector Design and Development of Products and Processes 0
Y CER: can "state of the art" help to make up for literature search on equivalant devices? EU Medical Device Regulations 1
D Need some Help on 8D fault tree analysis Problem Solving, Root Cause Fault and Failure Analysis 6
B Can someone help me explain P-Value with a simple word please? Capability, Accuracy and Stability - Processes, Machines, etc. 11
M Help on formulating a LP minimization problem Manufacturing and Related Processes 2
N Help with understanding Process Controls Manufacturing and Related Processes 7
K Screen printing ink and machine selection_ Need help Manufacturing and Related Processes 6
J Need Help with FPY Data in Assembly Process Manufacturing and Related Processes 7
S Need help on "Country of Origin" Medical Device and FDA Regulations and Standards News 0
M Need Help With Information Security Asset Risk Register IEC 27001 - Information Security Management Systems (ISMS) 2
T Help with BS EN ISO - IEC 80079-34 2020 (Explosive atmospheres QMS) Other ISO and International Standards and European Regulations 0
J Help settle a disagreement: Should external providers of preventive maintenance be on your ASL? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
N Help with basic understanding of Competence requirements ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
C ISO/ IEC 17021 Resource requirement (need help) Document Control Systems, Procedures, Forms and Templates 5
D Supplier Quality level category help - high level ISO 13485:2016 - Medical Device Quality Management Systems 6
D Amendment Class II - Please confirm if the submission is by email (Canada) - Help Canada Medical Device Regulations 0
T ISO/IEC 17065 certification scheme Help Other ISO and International Standards and European Regulations 7
T Help to Suggest name for a new certification and inspection company Coffee Break and Water Cooler Discussions 7
SocalSurfer AS9100 new certificate, but need QMS software, help Quality Assurance and Compliance Software Tools and Solutions 2
L Manufacturing Process Audit Help IATF 16949 - Automotive Quality Systems Standard 6
M Case study help as per ISO 9001: 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
M Case study solution help required as per ISO 9001 : 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1

Similar threads

Top Bottom