Help with AQAP related Quality Plan in compliance with NATO AQAP 2110 and AQAP 2210

J

johnp1231

#11
Re: Help with AQAP related Quality Plan in compliance with NATO AQAP 2110 and AQAP 22

Yes I could still use some assistance.
Thanks!
 
Elsmar Forum Sponsor
T

Turbomark

#12
Re: Help with AQAP related Quality Plan in compliance with NATO AQAP 2110 and AQAP 22

Regarding AQAP's (Allied Quality Assurance Publications):
NATO Countries military organizations for standardization reasons had decided to end up with a common "Standardization NATO Agreement" or "STANAG 4107" to agree under standard quality standards similar to various ISO 9001 series. You may say that they just took -as examble- the ISO 9130 and they create the equivalent AQAP 2130 that has some additional futures incorporated by NATO. Same agreement incorporates the additional to ISO capability for a customer country to delegate a "National or Government quality representative "N(G)QAR" from a respective office in its country, free of charge -except US-, to supervise the contractor (AQAP certified) on risk assessment identified by the delagetee regarding product / services or system. The AQAP also gives easy authorization to military repair facilities for "release to service" on foreign contracts since normally they cannot be EASA or FAA certified. Although AQAP like ISO are standards and EASA/FAA regulatory and thus non similar identities to compare but.. Military organizations they have their own internal quality regulations that you trust or not!
Did I manage to confuse you? :confused:
 

harry

Super Moderator
#13
Re: Help with AQAP related Quality Plan in compliance with NATO AQAP 2110 and AQAP 22

This is another link which you could use for reference.

Managing Quality - Policy, information and guidance on the Managing Quality aspects of UK MOD Defence Acquisition.

Introduction

1. MOD has a policy of Appropriate Certification; this means that where contracts are placed for products / services that are not simple, commercial-off-the-shelf or of low-value, and conformance to requirements cannot readily be checked after receipt, the IPTL must make sure that such contracts are only placed with contractors holding an appropriate quality system certification.

2. The International Standards organisation (ISO) 9000 family of standards do not address all of the MOD's contracting requirements and are therefore unsuitable for use in contracts. However, the Allied Quality Assurance Publications (AQAPs) of the 2000 series meet the MOD's contracting needs, embodying the requirements of the ISO 9001:2000 standard and importantly include additional clauses to meet MOD specific needs such as access to contractors' premises.

3. This use of the AQAPs is consistent with the order of preference, or hierarchy for standards selection in that the additional clauses constitute overarching MOD requirements. For more information see Standards Selection on the DStan website.
 
T

Turbomark

#14
Re: Help with AQAP related Quality Plan in compliance with NATO AQAP 2110 and AQAP 22

Thank you Harry, a very usuful input.
 
A

Aliyja

#15
Re: Help with AQAP related Quality Plan in compliance with NATO AQAP 2110 and AQAP 22

If you're still looking for consultant, you might fly this man in from Finland

aqap.fi

Love A
 
#16
Hello guys,

I'm now involved in revision of quality plans according to AQAP 2105. My questions are: Is it mandatory to follow step by step and in the same order paragraphs shown in that standard, or is the subcontractor free to choose its own order? If It were mandatory, is there any clause written in AQAP 2105 or AQAP 2110 about that? Thanks.
 

Thee Bouyyy

Involved In Discussions
#17
Hello guys,

I'm now involved in revision of quality plans according to AQAP 2105. My questions are: Is it mandatory to follow step by step and in the same order paragraphs shown in that standard, or is the subcontractor free to choose its own order? If It were mandatory, is there any clause written in AQAP 2105 or AQAP 2110 about that? Thanks.
Simple - All requirements are applicable unless agreement otherwise as documented as part of the contract with the acquirer. See 2.1 Compliance.
 
#18
Simple - All requirements are applicable unless agreement otherwise as documented as part of the contract with the acquirer. See 2.1 Compliance.
Hello Thee Bouyyy. Obviously all the requirements are mandatory, unless agreed with the costumer. My question was about the order of paragraphs in the Quality Plan. I have seen some quality plans that agree with the standard, but it would be easier to review them if the paragraphs were written in the same order as they are shown in the standard AQAP 2105 my Thanks.
 
Thread starter Similar threads Forum Replies Date
R Lead auditor scenario (Need help) is this non conforming to ISO13485 Manufacturing and Related Processes 2
J HELP NEEDED ! Risk Management Exercise ISO 14971 - Medical Device Risk Management 12
D Help Me. Non conformitty in External Audit IATF 16949 - Automotive Quality Systems Standard 13
U Need Help With API Q2 Quality Manual Oil and Gas Industry Standards and Regulations 8
A Nonconformity help IATF 16949 - Automotive Quality Systems Standard 5
J ISO 9001:2015 Clause 8.5.1 Control of Production and service provision - Help with Work Instruction Access ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
Azaarus Help with CAPA for an IATF finding regarding inspection documentation IATF 16949 - Automotive Quality Systems Standard 10
A Help needed with locating conector Design and Development of Products and Processes 0
Y CER: can "state of the art" help to make up for literature search on equivalant devices? EU Medical Device Regulations 1
D Need some Help on 8D fault tree analysis Problem Solving, Root Cause Fault and Failure Analysis 6
B Can someone help me explain P-Value with a simple word please? Capability, Accuracy and Stability - Processes, Machines, etc. 11
M Help on formulating a LP minimization problem Manufacturing and Related Processes 2
N Help with understanding Process Controls Manufacturing and Related Processes 7
K Screen printing ink and machine selection_ Need help Manufacturing and Related Processes 6
J Need Help with FPY Data in Assembly Process Manufacturing and Related Processes 7
S Need help on "Country of Origin" Medical Device and FDA Regulations and Standards News 0
M Need Help With Information Security Asset Risk Register IEC 27001 - Information Security Management Systems (ISMS) 2
T Help with BS EN ISO - IEC 80079-34 2020 (Explosive atmospheres QMS) Other ISO and International Standards and European Regulations 0
J Help settle a disagreement: Should external providers of preventive maintenance be on your ASL? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
N Help with basic understanding of Competence requirements ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
C ISO/ IEC 17021 Resource requirement (need help) Document Control Systems, Procedures, Forms and Templates 5
D Supplier Quality level category help - high level ISO 13485:2016 - Medical Device Quality Management Systems 6
D Amendment Class II - Please confirm if the submission is by email (Canada) - Help Canada Medical Device Regulations 0
T ISO/IEC 17065 certification scheme Help Other ISO and International Standards and European Regulations 7
T Help to Suggest name for a new certification and inspection company Coffee Break and Water Cooler Discussions 7
SocalSurfer AS9100 new certificate, but need QMS software, help Quality Assurance and Compliance Software Tools and Solutions 2
L Manufacturing Process Audit Help IATF 16949 - Automotive Quality Systems Standard 6
M Case study help as per ISO 9001: 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
M Case study solution help required as per ISO 9001 : 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
A Beginners help with ISO3951-2 Combined control s-method n>5 what is Phi ?? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
MDD_QNA Medical Device Software - Is a Help Button required? IEC 62304 - Medical Device Software Life Cycle Processes 1
S Need help with analysing a survey on minitab Using Minitab Software 1
M Help me improve the definition for internal PPM Manufacturing and Related Processes 3
I Help: QFD House of Quality Quality Tools, Improvement and Analysis 1
C New to Site - Request Help with API Q2 Implementation Oil and Gas Industry Standards and Regulations 9
O Please, help with document on ISO/ TS 17758 and (IDF 87: 1979). Thank you. Manufacturing and Related Processes 1
A Class medical device (MDD) - Classification help EU Medical Device Regulations 1
K A proposal for the model Quality Management - I need help for the project ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
A Help with Drawing Review - ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
Q % Study variation low, % tolerance high - GR&R Interpretation help Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
R Probability - Need a help to solve the below question Statistical Analysis Tools, Techniques and SPC 5
M Thanks for the help Coffee Break and Water Cooler Discussions 0
Judy Abbott Can any one help me with an urgent BIOCOMPATIBILITY Impact assessment? Internal Auditing 9
A Help establishing regulatory requirements - Plastic dental cartridge syringe US Food and Drug Administration (FDA) 0
A Medical Device Contract Manufacturing Requirements and Information - Help wanted ISO 13485:2016 - Medical Device Quality Management Systems 5
8 Need Help - Runout - Function Gage Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
T Burn out - Tips to help combat QC burnout Career and Occupation Discussions 19
Emran.mi Measurement system analysis - Can you help me about implementation MSA for CMM device Manufacturing and Related Processes 2
S New to FAIR, need help in filling it out AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
M Informational From RAPS: Danish Regulators Seek to Help Smaller Companies With EU MDR Compliance Medical Device and FDA Regulations and Standards News 0

Similar threads

Top Bottom