How can I justify adequacy of USB connector soldered on the product

S

saisai

hi, All,


Recently, there is a new product in which there is a USB receptacle soldered on the PCB.

Is there any mechanical testing for USB receptacle on the FG?
How I can make sure the electrical connection is reliable ?

thanks
 

somashekar

Leader
Admin
hi, All,


Recently, there is a new product in which there is a USB receptacle soldered on the PCB.

Is there any mechanical testing for USB receptacle on the FG?
How I can make sure the electrical connection is reliable ?

thanks
By a simple validation of the soldering process including the operator qualification as well.
 

Mikishots

Trusted Information Resource
hi, All,


Recently, there is a new product in which there is a USB receptacle soldered on the PCB.

Is there any mechanical testing for USB receptacle on the FG?
How I can make sure the electrical connection is reliable ?

thanks

Refer to IPC-A-610. You'll need to define your class required, then you need to go through the requirements of that class. Process validation is the way to go here - this can be considered a special process, as the finished product cannot be verified without destructive testing.
 
Top Bottom