How do you interpret this dimension in my drawing

Q

QAguygoqa

#1
How do you interpret the following dimension (number 3). What is pass and what is fail? I think .235 and .236 are pass. Any dimension less than .235 and greater than .236 are out of tolerance. Your take please. Appreciate it.
 

Attachments

Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
Sravan Manchikanti How to interpret '8.3 Control of nonconforming product' for SaMD device while implementing ISO 13485 & MDSAP ISO 13485:2016 - Medical Device Quality Management Systems 7
V How to interpret AQL sampling tables AQL - Acceptable Quality Level 5
Q IATF 16949 Cl. 4.4.1.2 - Product Safety - How to interpret IATF 16949 - Automotive Quality Systems Standard 13
B How to interpret Grindometer Gage R&R Results Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
L How to interpret the average R bar Value shown in the R Chart Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
N How to interpret the definition of clinical and preclinical trials? Other US Medical Device Regulations 3
K How to interpret Clause 7.6 for a service company? Service Industry Specific Topics 11
G Guidance Document to interpret IEC 60601-1 EU Medical Device Regulations 2
P How to interpret statement like 'Maintain a Procedure' Miscellaneous Environmental Standards and EMS Related Discussions 1
S How to interpret a Linear Regression in Minitab? Using Minitab Software 3
Q How to read and interpret an SIPOC (Suppliers Inputs Process Outputs Customers) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
M Transport Vehicle Thermal Regulation - How would you interpret this requirement? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
A How to interpret Minitab Results? What is difference in Cpk and Ppk values? Using Minitab Software 2
C How to interpret Measurement Uncertainty (MU) Measurement Uncertainty (MU) 5
T Please help me interpret my GR&R results Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
T Gage Bias and Linearity - How to interpret the Minitab results Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
F Gage R&R - How to interpret results? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
W MDR Reporting - How to interpret requirements for MDR Other US Medical Device Regulations 14
T SPC Data - Autocorrelation - How do I interpret this result? Statistical Analysis Tools, Techniques and SPC 17
S Could someone tell me what are the results of a Gage R&R & how to interpret it? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
D How to interpret TS Clause 7.5.1.4 Preventive and Predictive Maintenance? IATF 16949 - Automotive Quality Systems Standard 8
J How do you audit or interpret 'Where Appropriate' in ISO 9001 Clauses such as 7.4.2 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
P How to Interpret Caliper GR&R (Gage R&R) Graphical Result Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
D How do we interpret the following XmR Trend Chart data? Statistical Analysis Tools, Techniques and SPC 3
D How to interpret np chart data - Monitoring 6 medical records Statistical Analysis Tools, Techniques and SPC 6
Q Looking for Case Studies for How to interpret the requirements of ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 2
0 How to interpret s and x bar control charts Statistical Analysis Tools, Techniques and SPC 5
C CUSUM Chart - Can some one throw some light on use and how to interpret? Statistical Analysis Tools, Techniques and SPC 8
Peter Fraser "Anither language" - I'll Interpret your 'Jargon' Misc. Quality Assurance and Business Systems Related Topics 1
K Gage R&R - How do I interpret the %PV & %TV results? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
N How should I interpret Voice of the Customer QS-9000 - American Automotive Manufacturers Standard 1
S "Level of Control" over Suppliers - How do you Interpret and Accomplish Supplier Quality Assurance and other Supplier Issues 1
G How to ensure dimension of tapping hole before plating is correct? Manufacturing and Related Processes 2
6 MSA for Calculated Clearance Dimension Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
O Dimension Measurement Tool Recommendation General Measurement Device and Calibration Topics 21
P AS9102 Form 3 Dimension Results Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
J How to measure a Critical Characteristic that is a Basic Dimension Misc. Quality Assurance and Business Systems Related Topics 6
F Conversion of coordinate dimension holes to position dimension Design and Development of Products and Processes 3
G Customer complaint over a Reference Dimension Manufacturing and Related Processes 9
P Print Control Box - What does this dimension say? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
Prashant G MSA Study - AS 9100 and and our customer want us to do MSA study for their parts dimension Reliability Analysis - Predictions, Testing and Standards 4
B 7.1.5.1.1 MSA for inline dimension vision inspection equipment IATF 16949 - Automotive Quality Systems Standard 5
J Dimension control on injection molding parts Manufacturing and Related Processes 19
S Basic Dimension W/O using FCF Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
O Start Up Approval Dimension Records IATF 16949 - Automotive Quality Systems Standard 5
C The difference between a Critical Dimension vs. Critical Characteristic Misc. Quality Assurance and Business Systems Related Topics 2
C MSA (Measurement System Analysis) - Dimension Selection Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
Z Is PPAP Re-qualification needed in case of not quoted dimension change? APQP and PPAP 4
APHX02 AS9102 FAI Requirements that pertain to a Dimension 'delta' AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
T PPAP - Complaint from a Tier One customer concerning Product Dimension IATF 16949 - Automotive Quality Systems Standard 26

Similar threads

Top Bottom