How to compare Cpk and ppm (bad pieces)

D

drebernik

#1
Can you help me?

I need explanation how to compare cpk and ppm (bad pieces)....

Dušan R., SLOVENIJA
 
Elsmar Forum Sponsor

sktan

Starting to get Involved
#3
Re: cpk versus ppm

Just some quick comparison table as below:-


CP sigma ppm

2.00 6 3.4
1.67 5 233
1.33 4 6210
1.00 3 66800
0.83 2.5 160000
0.67 2 308540


SK Tan
 

Statistical Steven

Statistician
Staff member
Super Moderator
#4
Re: cpk versus ppm

Just some quick comparison table as below:-


CP sigma ppm

2.00 6 3.4
1.67 5 233
1.33 4 6210
1.00 3 66800
0.83 2.5 160000
0.67 2 308540


SK Tan
That assumes the process is perfectly centered. You cannot calculate PPM from Cpk directly but rather need CpL and CpU to calculate PPM on each side of the specification. Remember the PPM you estimate here is the "expected" PPM based on the population of parts, and NOT the actual PPM.
 
Thread starter Similar threads Forum Replies Date
I Uncalibrated source to calibrated meter, then compare to UUT General Measurement Device and Calibration Topics 4
D Signal Detection-If Ppk>1, compare measurement system to process. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
I Documents that compare Material Equivalents Manufacturing and Related Processes 2
M How to compare 2 independent samples having 3 factors 3 levels Statistical Analysis Tools, Techniques and SPC 5
T Software that will overlay Old Revision and New Revision Print and Compare Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
M Using Minitab to Compute & Compare the Mean and Standard Deviation Amount Using Minitab Software 7
T MSA - Should I compare my GRR to tolerance or to my sample? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 16
L I have four groups to compare, and each group has three samples Using Minitab Software 4
Z Help to compare data - 3 groups (15 batches each) collected over 3 consecutive weeks Using Minitab Software 7
N I have 2 groups to compare - Minitab and stats newbie - Please help Using Minitab Software 18
B Sample Size - I want to compare 2 different processes Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
V PPAP for electronics - What do we have to require for PCB compare to mechanical parts APQP and PPAP 4
F Can someone to help to compare APQP and DMAIC? Six Sigma 10
Stijloor Ford execs compare Taurus to Homer Simpson World News 4
ScottK Minitab vs JMP: compare, contrast, recommend? Quality Tools, Improvement and Analysis 2
K What do you expect from a new position? Let?s compare benefits Career and Occupation Discussions 18
P t-test or ANOVA to compare variance of several samples series Statistical Analysis Tools, Techniques and SPC 12
RoxaneB Certified Performance Technologist - How does it compare to an ASQ certification? Professional Certifications and Degrees 4
R How Can I compare measurements of different appraiser for a same product Reliability Analysis - Predictions, Testing and Standards 4
P How does the FDA's SMG 2020 compare to ISO/TR 10013:2001? US Food and Drug Administration (FDA) 2
Wes Bucey Compare FDA to FAA compliance? Six Questions Federal Aviation Administration (FAA) Standards and Requirements 3
C Hypothesis Testing - What to use to compare the product quality of two suppliers Supplier Quality Assurance and other Supplier Issues 3
M Compare the standards EN 45000 and Guide 25 to ISO 17025 ISO 17025 related Discussions 1
W LTPD, AQL, Ppk and Cpk validation sampling plan table Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
M Cp and Cpk for straightness and parallelism Capability, Accuracy and Stability - Processes, Machines, etc. 8
Q Capability - CPk comparison values Capability, Accuracy and Stability - Processes, Machines, etc. 12
D Tolerance definition based on expected Cp/cpk Reliability Analysis - Predictions, Testing and Standards 14
K Analysis variation among the lots during cpk calculation. Design and Development of Products and Processes 1
S Recommendation for user friendly Gaga R&R and Cpk software Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
A How to set up Continuous CpK monitoring of an injection mold process Reliability Analysis - Predictions, Testing and Standards 7
A Interpretation with regards to Ppk > Cpk Capability, Accuracy and Stability - Processes, Machines, etc. 14
U Cpk Calculation - I analyse a double seam cans Manufacturing and Related Processes 15
Proud Liberal Cp / Cpk on position using multiple MMC bonuses Capability, Accuracy and Stability - Processes, Machines, etc. 2
I Can we use pin gauges to measure an accurate Cpk ? Capability, Accuracy and Stability - Processes, Machines, etc. 9
T Final process capability results - What I am supposed to present? Cp and CpK? APQP and PPAP 11
F CpK on a manufactured assembly? Reliability Analysis - Predictions, Testing and Standards 7
M How is the Cmk and Cpk calculated? Statistical Analysis Tools, Techniques and SPC 0
O Cpk for Unilateral Tolerance Capability, Accuracy and Stability - Processes, Machines, etc. 9
B How to calculate CPK with n = 1 Manufacturing and Related Processes 2
O CPK with a P value less than 0.005 Manufacturing and Related Processes 8
A Short Term vs. Long Term SPC Study - Where is Cp and Cpk Defined Statistical Analysis Tools, Techniques and SPC 8
A Cpk Formula seems off, need help!? Capability, Accuracy and Stability - Processes, Machines, etc. 11
D Cp/Cpk on Gages for MSA (vs. Cg/Cgk) Capability, Accuracy and Stability - Processes, Machines, etc. 21
E Questions regarding Cpk Calculation - Should we be using LSL/USL or LCL/UCL? Capability, Accuracy and Stability - Processes, Machines, etc. 5
B Maximum Material Condition with Bonus - Determine Cpk for this one kpc Measurement Uncertainty (MU) 2
Hami812 Cpk Setting Tolerance - Cart before the Horse? (Wifi Routers) Capability, Accuracy and Stability - Processes, Machines, etc. 3
T Calculating LCL, UCL, Cp, and Cpk in an Excel Spreadsheet Statistical Analysis Tools, Techniques and SPC 3
Proud Liberal Cpk on Position w/ MMC on Location and Size Capability, Accuracy and Stability - Processes, Machines, etc. 3
E SPC Production - Getting Cpk and Ppk Statistical Analysis Tools, Techniques and SPC 8
S Track Cpk trend Statistical Analysis Tools, Techniques and SPC 5

Similar threads

Top Bottom