How to do an In-Process Measurement Gage R&R

C

Curtis317

#1
I am considering how best to do a gage study on a measuring system that is used in process. The parts are on a pallet and presented to the measuring device which comes down measures and retracts. Any ideas how to do a gage r and r study?
 
Elsmar Forum Sponsor

Jim Wynne

Staff member
Admin
#2
I am considering how best to do a gage study on a measuring system that is used in process. The parts are on a pallet and presented to the measuring device which comes down measures and retracts. Any ideas how to do a gage r and r study?
What's being measured, and by what?
 
C

Curtis317

#5
Jim, I do not understand why it matters that you need specific details about the measuring device. It does not matter. The issue is that the parts are presented to the measuring station on an automated conveyor. Then the tool comes down and measures it. The specific details of the device are not relevant. My question is how to you do a GRR on an automated process with no human interaction.
 

Jim Wynne

Staff member
Admin
#6
Jim, I do not understand why it matters that you need specific details about the measuring device. It does not matter. The issue is that the parts are presented to the measuring station on an automated conveyor. Then the tool comes down and measures it. The specific details of the device are not relevant. My question is how to you do a GRR on an automated process with no human interaction.
Have a look at this thread: Ford Type 1 MSA
Make sure you understand the underlying assumptions regarding operator contribution, even if you think there is no operator.
 
Thread starter Similar threads Forum Replies Date
B Gage R&R/MSA for In Process Measurement System in a Turning Machine Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
T Are MSA?s (Measurement System Analysis) Process or Gage Based? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 20
S Gage R&R for two step measurement process Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
S Statistical Process Control and the need for Measurement System Analysis (Gage R&R) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
K Software Validation for Measurement Tools used in Process Validation ISO 13485:2016 - Medical Device Quality Management Systems 2
K Process Mapping - Inputs/Outputs/Detail Activities/Control points/Measurement? Process Maps, Process Mapping and Turtle Diagrams 4
D IATF 16949 Process Measurement and Efficiency Measures Requirements IATF 16949 - Automotive Quality Systems Standard 2
T Method to assess Measurement System of a Continuous Process Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
W MR Inputs (9.3.2) - "Monitoring and Measurement Results" vs. "Process Performance" Management Review Meetings and related Processes 8
S MSA (Measurement System Analysis) - Process Tolerances Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
D Signal Detection-If Ppk>1, compare measurement system to process. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
T MSA on Camera Vision System and other Process Measurement Systems Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
S Measurement Plan for a Running Process Parameter Quality Manager and Management Related Issues 3
S Process Monitoring and Measurement - AS9100 Clause 8.2.3 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
E MSA (Measurement System Analysis) Study on an Automated Process Quality Tools, Improvement and Analysis 4
L MSA (Measurement Systems Analysis) Process template - ISO TS 16949 Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
D Performance Measurement Data ? Delivery Process Statistical Analysis Tools, Techniques and SPC 2
L Process Measurement - ISO 9001:2008 Clause 8.2.3 - Whats your Interpretation ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
S Charting the 4 M's - How to turn these into a process measurement? Lean in Manufacturing and Service Industries 3
R EMP (Evaluating the Measurement Process) Studies for Bias Effect Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
H Measurement of process compliance for a software project Software Quality Assurance 1
R internal comunication process measurement Nonconformance and Corrective Action 4
Y Measurement Systems Analysis - Effect on Process Decisions - MSA Manual page 19 Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
H How to understand "Monitoring the Process"? "Measurement" of the Process? IATF 16949 - Automotive Quality Systems Standard 14
K Measurement System Process Map Process Maps, Process Mapping and Turtle Diagrams 1
D Measurement Uncertainty effects on Process Capability and Tolerances Measurement Uncertainty (MU) 7
Y How can we do MSA (Measurement Systems Analysis) for Chemical Process Equipment? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
P Measurement Resolution of In-Process Automated Inspection System - Stamping House Inspection, Prints (Drawings), Testing, Sampling and Related Topics 13
Q Example of Format for SPC Audit - Measurement and analysis at each process step Statistical Analysis Tools, Techniques and SPC 6
A Internal Audits - Design Process Measurement (Measureables) Design and Development of Products and Processes 6
A Process Measurement Parameters - Purchasing, design and production ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
M MSA Chicken and Egg - Process Capability and Measurement System Capability Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
M Process Measurement - Only Processes Defined in our Quality Manual? Quality Management System (QMS) Manuals 26
I Process Mapping - Inputs/Outputs/Detail Activities/Control points/Measurement Process Maps, Process Mapping and Turtle Diagrams 7
Marc MSA (Measurement Systems Analysis) in a Continuous Process Enviroment Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
J Need Help with FPY Data in Assembly Process Manufacturing and Related Processes 7
A When someone refuses to follow a process.... Misc. Quality Assurance and Business Systems Related Topics 21
E Software maintenance Process Software maintenance Process to IEC 6204? IEC 62304 - Medical Device Software Life Cycle Processes 3
R AS5553 Clause 3.1.7 f - "Implement a returns process....." AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
normhowe "The Problem with Quality Management: Process orientation, controllability and zero-defect processes as modern myths" Book, Video, Blog and Web Site Reviews and Recommendations 2
Judy Abbott General temperature used in the blasting process and laser process Manufacturing and Related Processes 2
B SOP for CNC turret punching machine for sheet metal process Manufacturing and Related Processes 0
A API Monogram audit review process Oil and Gas Industry Standards and Regulations 4
R AS9102 FAI Change in Material / Process Supplier AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
A Process mapping Process Maps, Process Mapping and Turtle Diagrams 1
R MDEL Process Canada Medical Device Regulations 4
optomist1 Rates Daily or Hourly Process Improvement Training Consultants and Consulting 2
S Manufacturing Process FDA FOIA Medical Device and FDA Regulations and Standards News 3
S Manufacturing Process FDA FOIA US Food and Drug Administration (FDA) 4
B Toyota PPAP Process - Three Questions APQP and PPAP 3

Similar threads

Top Bottom