How to Measure Labor Efficiency

R

Ramizz

#1
Hi,

We are currently working on a new Six Sigma project to improve the 2-way internal communication in our factory. It was decided that one of the key metrics to be used is "Labor Efficiency" since improving internal communication will by default improve the "Labor Efficiency" which is one of the major factors that will influence productivity.

I found while surfing the Internet that some calculate it to be:

  • Labor Efficiency = Units produced / Labor hours
  • Labor Efficiency = Standard labor hours / Actual labor hours
The problem by using one of the above equations is that they will not obviously provide us with improvement in Labor Efficiency and Moral due to improvement in internal communication?!!

So how to measure Labor Efficiency? :(
 
Elsmar Forum Sponsor

Jen Kirley

Quality and Auditing Expert
Staff member
Admin
#2
Re: Labor Efficiency

Another problem I see is a potential difficulty in addressing either of the above as a 6S project. Producing a unit could involve several steps or even separate processes. Expectations would need to be set for each of them, so as to know at just what point a "bottleneck" is occurring that needs to be addressed.

My other concern is using the term "standard labor hours." What is the standard, and where does it come from?

You haven't described how much has been done to make sure the labor factor is the valid target. Are all the tools and materials available, in good order, easily identifiable and within comfortable reach? Is there adequate instruction available? Is the environment favorable--that is, not too hot or noisy to concentrate?

Notice how I haven't even addressed the labor aspect. That's because I prefer to address the process, and labor - the human element - is just one part of it.

:2cents:
 
M

munagada

#3
Re: Labor Efficiency

Manpower productivity (we call in our steel plant; tons of crude steel produced per man-year) depends on many factors, communication is one of those factors.

If I understand correctly, your project should look into CTQ measures of 2-way communications, rather than labour efficiency, which is an indirect measure.

Regards,
M Rama Krishna
 
R

Ramizz

#4
Re: Labor Efficiency

Yes, I think (and maybe I am wrong) that communication is one of the factors that will improve employment efficiency which is by itself a factor that will improve productivity.

Productivity factors could be (supervision, work methods, utilization of resources, workforce efficiency, etc.). While workforce efficiency factors could be (motivation, recognition, training, internal communication, etc.), and the internal communication part is our Continuous Improvement project.

Maybe Six Sigma is not the write methodology for these type of projects, although DMAIC cycle seems to be the best way to achieve the target!

The "Standard Labor Hours" which I found somewhere on the Internet is maybe the optimal working hours without the considering absenteeism and overtime.

By the way, we are using other CTQ measures such as:

  • Meeting effectiveness
  • Suggestion system awareness & participation
  • Feedbacks given after idea processing
So what type of 2-way communications CTQ do I need to measure, and shall I ignore the the Labor Efficiency (which is an indirect measure).

Thanks.
 

Jen Kirley

Quality and Auditing Expert
Staff member
Admin
#5
Re: How to Measure Labor Efficiency?

It sounds as though this subject is becoming too complex. I am wondering if the question is about labor, or if it is about process efficiency?

My focus on labor efficiency is to first make sure that the only thing being evaluated is the labor: all the other factors have been simplified, standardized, explained, streamlined and problems resolved so the only thing left is how well an employee perfoms the tasks.

I expect that, if all those process things were done correctly, labor (the actual hands on aspect) would become much less of a problem.

So: are you inquiring about process efficiency? That could be measured as a ratio of units of output per employee or machine hour. It would incorporate all the factors, including personnel labor.

Or are you inquiring about job performance efficiency? That could be measured as a ratio of the time it takes persons A, B and C to do a task as compared to a baseline time set by a skilled operator.

This works best when all the factors besides the hands on stuff are the same. That could even include the ability to reach all the needed points of the process: is Person A taller or have longer arms than Person B? If we're talking about hands on labor, such things need to be considered because even reaching for an item takes perhaps a second longer for me than it does for my son, and that adds up.

So, I caution to use great care in defining just what you want improved, and make sure that variation in only that factor is being addressed. Otherwise, improvements may be made without knowing how - that can make successes harder to repeat.

I hope this helps!
 
R

Ramizz

#6
Re: How to Measure Labor Efficiency?

Thank you Jennifer,

Yes, my inquiry was about job performance efficiency. What is important in the project is to be able to measure the improvement in the performance as a result of improving some systems such as internal communication, reward and recognition, competency, etc.

For example, if we've improved our suggestion and feedback sub-system (which is part of the internal communication), how this will reflect on the employee's moral and behavior. Of course he would feel satisfied after he suggests some great idea then he gets a feedback, and this would reflect on his performance, correct?

My questions are:

Is this a Six Sigma project?
What type of 2-way communications metrics do we need to measure?
Shall we ignore the the Labor Performance Efficiency metric (which is an indirect measure)?
 
Last edited by a moderator:

reynald

Quite Involved in Discussions
#7
Re: How to Measure Labor Efficiency?

Thank you Jennifer,

Yes, my inquiry was about job performance efficiency. What is important in the project is to be able to measure the improvement in the performance as a result of improving some systems such as internal communication, reward and recognition, competency, etc.
If my understanding is correct, you want to measure the decrease in MIS-communication due to improvement of your communication system. You want to relate this to labor efficiency because mis-communication may mean somebody has to do the job all over again. If this is the case, i suggest you measure 2 things:
1: Cases of mis-communication per defined and regular period/interval
2. Cases of re-work due to miscommunication.
If your new system is really effective, both these should decrease.

Note: Much better if you can translate 1 & 2 in positive terms (% correct communication/understanding per day, etc...)

Hope that helps

>>Reynald
 

Jen Kirley

Quality and Auditing Expert
Staff member
Admin
#8
Re: How to Measure Labor Efficiency?

Good input from Reynald.

I would not make this a 6S project. However, I would do it as pragmatically as is reasonably possile, so I could repeat the effort elsewhere.
 
R

Ramizz

#9
Re: How to Measure Labor Efficiency?

I agree with you that the project might be applied pragmatically. In fact, this is my first BB project and it was assigned to me and I have to do it in Six Sigma.

This project is a business-level project which contains many sub-processes and could be broken down into many GB/BB projects.

By the way, the project was estimated to be completed within 10 months.

Ramizz
 
Thread starter Similar threads Forum Replies Date
C First Article Inspections - 'how to measure' General Measurement Device and Calibration Topics 11
lanley liao Question regarding the calibration of monitoring and measure equipment. Oil and Gas Industry Standards and Regulations 0
J Should a Class 1 medical device with an option to measure body weight be considered Class 1m? EU Medical Device Regulations 0
M Gage R&R and right way to measure Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 16
P How to measure DPPM in Chemical batch manufacturing Quality Tools, Improvement and Analysis 1
silentmonkey How to measure severity if my product is designed for emergency use and failure would result in death? ISO 14971 - Medical Device Risk Management 9
A Looking for a third party to calibrate our measure equipment - South Carolina General Measurement Device and Calibration Topics 6
J Validity / outcomes measure for custom made medical device ISO 13485:2016 - Medical Device Quality Management Systems 2
D Performance specification as a Risk Control Measure, EN 14971 ISO 14971 - Medical Device Risk Management 7
J KPIs or Metrics to Measure a New Complaint Handling Process 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 9
D Torque fractional unit of measure; cN-m or N-cm? General Measurement Device and Calibration Topics 2
qualprod ISO 9001 5.1.1 - How to measure System effectiveness ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
J How to measure a Critical Characteristic that is a Basic Dimension Misc. Quality Assurance and Business Systems Related Topics 6
I Can we use pin gauges to measure an accurate Cpk ? Capability, Accuracy and Stability - Processes, Machines, etc. 9
qualprod Best criteria to measure Corrective Action effectiveness - Poor Maintenance ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
1 How to measure straightness on a HEX Long Bar Manufacturing and Related Processes 7
Ron Rompen Measurement Method Challenge - Measure feature #91 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
G Measure 3 times, for calibration report? Customer Owned Reference Standard General Measurement Device and Calibration Topics 4
M Informational The ANSM decides, as a precautionary measure, to withdraw from the market macrotextured breast implants and breast implants with polyurethane-coated s Medical Device and FDA Regulations and Standards News 0
M Informational Health Canada advises Allergan of its intent to suspend its licences for Biocell breast implants as a precautionary measure Medical Device and FDA Regulations and Standards News 0
U SI 13 - Not Every Process Requires an Efficiency Measure IATF 16949 - Automotive Quality Systems Standard 1
P NPR Metric - What if Customer has relaxed measure? TL 9000 Telecommunications Standard and QuEST 1
T Tape Measure, the right device for 2 or 3 decimals accuracy on prints General Measurement Device and Calibration Topics 8
M How do we document and measure a service we do not provide? IATF 16949 - Automotive Quality Systems Standard 1
M For a Type 1 Gage R&R I want to use 1 unit and measure it 30 times Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
M How to Measure Paper considering Variation and Humidity General Measurement Device and Calibration Topics 10
rob73 Advice/recommendations for equipment to measure a soft pvc tube - Optical Measuring? General Measurement Device and Calibration Topics 4
R Height gauge to measure short hard to access heights General Measurement Device and Calibration Topics 3
D Proper Tool to Measure Wall Thickness (ISO 3611 - Micrometers) Manufacturing and Related Processes 7
S Quality Measure for Engineering Services Misc. Quality Assurance and Business Systems Related Topics 1
A What are methods and tools to measure Workload analysis ? Human Factors and Ergonomics in Engineering 1
M How do I measure variation in my process ? Capability, Accuracy and Stability - Processes, Machines, etc. 3
J How to measure process quality? Is DPPM the correct metric? Capability, Accuracy and Stability - Processes, Machines, etc. 5
M Micrometer Anvil Placement to measure the diameter of Steel Wires Measurement Uncertainty (MU) 6
S Where to Get SPC Training to Measure our Processes? Training - Internal, External, Online and Distance Learning 12
M A question on Measurement System Analysis - Stability to measure got Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
Jim Wynne Measure Twice, Cut Once: The French Railroad Snafu World News 18
S Measure water activity for fresh raw chicken meat and giblets Food Safety - ISO 22000, HACCP (21 CFR 120) 1
O Metrology Devices to Measure the Basic Dimensions of Plastic Specimens General Measurement Device and Calibration Topics 6
L How to Measure Paint Thickness for an Enclosure Manufacturing and Related Processes 5
C Chamfer Measurements - Do you measure the height and width or the hypotenuse? Manufacturing and Related Processes 15
R Repeatability in MSA - Is repeatability a measure of Location Error Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
E How can I measure three true positions? GD&T basic question General Measurement Device and Calibration Topics 5
V How to use a Calibration Certificate in Uncertainty Calculation for a Test Measure Measurement Uncertainty (MU) 13
R How do companies measure QC Productivity? Quality Manager and Management Related Issues 3
V How to measure radius without radius gages APQP and PPAP 4
A Device to measure "Straightness & Deformation" of a metal that's under water Manufacturing and Related Processes 4
M How to measure effectiveness and efficiency of the established QMS as Auditors ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 14
F Specification for how to measure lengths of hose assemblies Various Other Specifications, Standards, and related Requirements 1
P MSA requirements for Systems that Measure Process Parameters Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3

Similar threads

Top Bottom