HT2005 for Heat Treating - Has anyone seen a copy of the DRAFT?

B

bluelady

#31
CQI-9 Grrrrrrrrrr

ok... so here I am, a captive where the only related process I have is brazing of parts that I manufacture in-house, then sell (if I'm lucky) to our mutual friends.
As I pore through the latest version of CQI-9, I can't tell which of the process tables I'm supposed to follow in order to comply with when attempting to complete the survey ... :frust: :confused:
Then I shift attention (to eliminate the headache...) to W-HTX (thx Melinda) and find maybe 3 lines that I can respond to with anything other than n/a ... and this will improve the way we do business?????

aj
 
Elsmar Forum Sponsor

Helmut Jilling

Auditor / Consultant
#32
CQI-9 Grrrrrrrrrr

ok... so here I am, a captive where the only related process I have is brazing of parts that I manufacture in-house, then sell (if I'm lucky) to our mutual friends.
As I pore through the latest version of CQI-9, I can't tell which of the process tables I'm supposed to follow in order to comply with when attempting to complete the survey ... :frust: :confused:
Then I shift attention (to eliminate the headache...) to W-HTX (thx Melinda) and find maybe 3 lines that I can respond to with anything other than n/a ... and this will improve the way we do business?????

aj

I will freely admit that I am still learning what all is included in CQI-9, but I don't don't recall eaither address brazing. I believe these are both for heat treat processes? Do they contain requirements for other processes as well?
 
B

bluelady

#33
I will freely admit that I am still learning what all is included in CQI-9, but I don't don't recall eaither address brazing. I believe these are both for heat treat processes? Do they contain requirements for other processes as well?
Yep ... that's my take on it also ... but then there's this in the Ford roll-out letter posted by Melinda previously in this thread ...

aj
 

Attachments

Jim Wynne

Staff member
Admin
#34
Yep ... that's my take on it also ... but then there's this in the Ford roll-out letter posted by Melinda previously in this thread ...

aj
Thanks, bluelady.

:confused: How do brazing and sintering get lumped together with heat treating? And if brazing is covered, why not soldering? :bonk:
 
M

Mike37fr

#36
I just have a look on the web site and if you want to buy the CQI-9 about Heat Treat Self Assessment , you must come with 96$ in your poket .

I guest they make a better price for good suppliers !!!
Some boddy has already buy it ?
Mike
 

Crusader

Trusted Information Resource
#37
I just have a look on the web site and if you want to buy the CQI-9 about Heat Treat Self Assessment , you must come with 96$ in your poket .

I guest they make a better price for good suppliers !!!
Some boddy has already buy it ?
Mike
We bought it for $55 from their (AIAG) site. I just got it last Friday but have not had time to read it yet.
 
M

Mike37fr

#38
We bought it for $55 from their (AIAG) site. I just got it last Friday but have not had time to read it yet.
I'm interested to know a lot about .
What kind of file ( I suppose an Excell file )
Is there some thing for sub-suppliers ?
Do we have to fill it up without sub-suppliers ?
Does the sub-suppliers have to buy the form also ? and sent it to us and we sent it to Ford ?
And also, why not a french version ??? ( I understand much better french than english :lol: ) . Or am I allowed to dream ?
Regards
Mike
 

Crusader

Trusted Information Resource
#39
I'm interested to know a lot about .
What kind of file ( I suppose an Excell file )
Is there some thing for sub-suppliers ?
Do we have to fill it up without sub-suppliers ?
Does the sub-suppliers have to buy the form also ? and sent it to us and we sent it to Ford ?
And also, why not a french version ??? ( I understand much better french than english :lol: ) . Or am I allowed to dream ?
Regards
Mike
We bought the hardcopy document. I cannot answer any other questions - I have not read through it yet.
 
Thread starter Similar threads Forum Replies Date
T HT2005 - New AIAG Standard for Heat Treating? Various Other Specifications, Standards, and related Requirements 17
D HT2005 - AIAG Document - Ford heat treaters - Special Processes Various Other Specifications, Standards, and related Requirements 4
V Setup for testing against ISO14708 clause 16 (protection of the patient from herms caused by heat) Other Medical Device Related Standards 0
E 60950-1 resistance to abnormal heat test Various Other Specifications, Standards, and related Requirements 0
D Risk Analysis using Monte Carlo Simulation instead of Scoring and Heat Map Risk Management Principles and Generic Guidelines 2
S Heat Sealers Upper and lower limit setting during OQ for Heat Sealer Qualification and Validation (including 21 CFR Part 11) 0
R MSA studies for Heat Treatment Equipment Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
K Calculating Heat Dissipation Manufacturing and Related Processes 1
B API Q1 5.7.1.5 Process Validation - Machining, heat treating, Manganese Phosphate and Zinc Plating Manufacturing and Related Processes 2
G Heat Number on CofC - Stainless steel tube Manufacturing and Related Processes 2
K Moist Heat Sterilization worldwide Requirements and Regulations Other Medical Device Regulations World-Wide 1
D Minor non-conformance for not receiving a CofC from a heat treater Manufacturing and Related Processes 10
T Heat treat test dimple Manufacturing and Related Processes 3
X Heat Treat - Verifying mechanical properties on heat treated material per the ASTM Manufacturing and Related Processes 6
Ron Rompen The Effect of Heat on Production and Quality Human Factors and Ergonomics in Engineering 14
S Performing PQ on a Small (tabletop) Air Heat Treating Oven ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
M API 6D-2014 24th Ed. Pto 6.10 - Heat Treatment Equipment Qualifications Oil and Gas Industry Standards and Regulations 4
H Standards to use for Propylene Glycol Heat/Cooler Fluid in a Device RoHS, REACH, ELV, IMDS and Restricted Substances 2
C Practical use of Heat Input calculation for Manual MIG Welding Manufacturing and Related Processes 5
S Heat Treatment - Soaking time interpretation Manufacturing and Related Processes 5
S Industrial Aseptic Bag Heat Sealing Sampling and Qualification Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
E CQI 9 (Heat Treatment) Assessment Requirements - Company and Customer Requirements Customer and Company Specific Requirements 1
S Paperless Temperature Recorder for Temperature Surveys on Heat Treatment Ovens General Measurement Device and Calibration Topics 6
I AS9100 PPAP requirements for outside Heat Treat vendors/suppiers AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
G SPC in Heat Treatment Workshop Statistical Analysis Tools, Techniques and SPC 2
S AMS 2750E Heat Treat Furnace System Accuracy Test SAT Report question AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
S Heat Map ISO/TS 16949:2009 Clauses IATF 16949 - Automotive Quality Systems Standard 1
M AMS2770 Aluminum Heat Treat - Determining Soak Time Various Other Specifications, Standards, and related Requirements 1
S Thermal Sensitivity Testing - Heat Lamp - ILY - Increased blood circulation IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
F Heat and Moisture Oxygen Port Changes Classification 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
J ISO 17665-1 & 2 Review and approval of validation (of moist heat sterilizers) Other ISO and International Standards and European Regulations 3
Q Heat Treat Steel, Rockwell C - Variability in Complex Machined Shapes Manufacturing and Related Processes 7
M Who Stole our Nevada Heat Coffee Break and Water Cooler Discussions 7
J FAI for Heat Treated Details - Inco Parts Shrink AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
W IR Camera - Heat Survey of parts during dynamic testing General Measurement Device and Calibration Topics 5
P NADCAP Certified - Heat Treat Continuous Belt Driven Oven question AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
A NADCAP AC 7101/03 Heat Treatment Process Acceptance Tests AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
V Is there a Heat Treat certification that is required at PPAP? APQP and PPAP 4
R CQI-9 Heat Treat Assessment Services recommendations wanted IATF 16949 - Automotive Quality Systems Standard 3
V Is the CQI-9 Heat Treat Assessment performed by a 3rd Party Auditor APQP and PPAP 1
J CQI-9 Table E, 4.1 - Heat Treating Process Requirements Other ISO and International Standards and European Regulations 2
S Special Gages for Measuring Pre-Heat Treat Thread Size Measurement Uncertainty (MU) 3
R Fuses that in series with each supply lead are only housed by Heat Shrink Tubing IEC 60601 - Medical Electrical Equipment Safety Standards Series 12
J Impact of 17-4 PH Heat Treating the same material twice Manufacturing and Related Processes 7
V CQI-9 Heat Treat System Assessment Other ISO and International Standards and European Regulations 11
V Issue: Suppliers charge for complete Level III PPAP package - Heat Treated Parts APQP and PPAP 16
V What should I require of a Heat Treat PPAP? Surface Hardness per SAE J664 APQP and PPAP 1
R CQI-9 Heat Treatment Process Table C question IATF 16949 - Automotive Quality Systems Standard 3
K Heat Treatment (Softening) on Cast Iron before it can be drilled to form Thread? Manufacturing and Related Processes 4
Sam Lazzara Bar Sealer vs. Impulse Sealer for Medical Pouch Heat Sealing Qualification and Validation (including 21 CFR Part 11) 4

Similar threads

Top Bottom