IATF Specific sections in 8.3 which are required despite not being Design Responsible

[gakiss2]

I am revitalizing our QMS (IATF). We are not Design Responsible and note that in our scope.
Practically, I understand the need to apply parts of 8.3 since we are responsible for Process Design.
I would like to know which specific sections of 8.3 that an auditor could legitimately hold us to. Some sections seem obvious and even include 'process design' in the title. Some sections are clearly meant for product design only. The rest seem like a grey zone to me. I would appreciate any direction / feedback .

 

[John C. Abnet]

Consideration should be given to each of the following (in regard to PROCESS design and related controls)...
8.3.1.1
8.3.2.1
8.3.3.2
8.3.3.3
8.3.4.1
8.3.4.4
8.3.5.2


The standard is really quite self explanatory in this regard. If the clause (within 8.3) refers to 'process' in regard to converting your inputs into outputs, (i.e. manufacturing) then it applies and, as I infer you already understand, PROCESS design/development requirements can not be excluded.

Hope this helps.

Be well.

 

[gakiss2]

Yes that is very helpful. And yes I do understand that process design is required as well as quite necessary.