IATF16949, clause 8.5.2.1 Identification and traceability-supplemental

DeeDeeM

Starting to get Involved
#1
Hello All,
I'd like to ask for your assistance about the meaning of safety-related nonconformities in clause 8.5.2.1 Identification and traceability — supplemental
"The purpose of traceability is to support identification of clear start and stop points for product received by the customer or in the field that may contain quality and/or safety-related nonconformities."
Are these safety-related nonconformities related to product safety or human (user) safety

Thank You in advance, :thanx:
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
Hello All,
I'd like to ask for your assistance about the meaning of safety-related nonconformities in clause 8.5.2.1 Identification and traceability — supplemental
"The purpose of traceability is to support identification of clear start and stop points for product received by the customer or in the field that may contain quality and/or safety-related nonconformities."
Are these safety-related nonconformities related to product safety or human (user) safety

Thank You in advance, :thanx:
Both. Unsafe products affect the well-being of humans.
 
Thread starter Similar threads Forum Replies Date
M IATF16949 Clause 9.1.2.1e - Customer notification related IATF 16949 - Automotive Quality Systems Standard 4
P Definition of production tooling in IATF16949 clause 8.5.1.6 IATF 16949 - Automotive Quality Systems Standard 4
C IATF16949 certification eligibility IATF 16949 - Automotive Quality Systems Standard 6
J How many majors is one company allowed ? IATF16949 Manufacturing and Related Processes 16
Jimmy123 IATF16949 Control Plan FMEA and Control Plans 1
B IATF16949 audit requirement - Auditor request UCL and LCL must be show Xbar-R, IATF 16949 - Automotive Quality Systems Standard 7
D IATF16949 - Interpretation of Customer Requirements clauses IATF 16949 - Automotive Quality Systems Standard 3
D IATF16949 7.5.3.2.1 Record Retention - Our Product or Customer Product? Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 1
I IATF16949 Audit Preparation, Need "searchable" ANPQP 3.1 or latest IATF 16949 - Automotive Quality Systems Standard 1
T QMS Training for my organization - IATF16949 and also AS9100 or 9145 Manufacturing and Related Processes 2
J Your opinion on the better training org for IATF16949 Internal auditor and Lead Auditor IATF 16949 - Automotive Quality Systems Standard 3
K IATF16949 inputs/outputs & KPIs Internal Auditing 3
K Caliso IATF16949 Auditor Training question Internal Auditing 1
D Identifying externally provided services referenced by IATF16949 IATF 16949 - Automotive Quality Systems Standard 2
K IATF16949 8.5.1.5 Total Productive Maintenance IATF 16949 - Automotive Quality Systems Standard 9
E Ask for supplier control procedure which conforms to IATF16949 IATF 16949 - Automotive Quality Systems Standard 0
K Online IATF16949 training Internal Auditing 10
S IATF16949:2016 certified without ISO:9001:2015 IATF 16949 - Automotive Quality Systems Standard 9
T IATF16949:2016 8.7.1.4 Control of non-applicable reworked product IATF 16949 - Automotive Quality Systems Standard 3
A Documented Processes as per IATF16949 - Requirements for Turtle Diagrams IATF 16949 - Automotive Quality Systems Standard 3
D IATF16949 Second Location Certification IATF 16949 - Automotive Quality Systems Standard 2
C ISO 13485 Clause 7.3.3 a) ISO 13485:2016 - Medical Device Quality Management Systems 2
S ISO 13485, Clause 4.1.2 b) ISO 13485:2016 - Medical Device Quality Management Systems 11
B ISO 17025:2017 Clause 7.1.3 - Decision Rule ISO 17025 related Discussions 2
T ISO/IEC17021-1 clause comparison Other ISO and International Standards and European Regulations 0
G ISO 9001-2015 How to co-relate Clause 4.2 & Clause 6.1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 22
D AS9100 Rev D - Clause 8.7 Control of Non conforming outputs AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
B How to satisfy clause 5.7.1.5 process validation for valve production API 6D Oil and Gas Industry Standards and Regulations 13
W IEC 60601-1 clause 8.8.3 - Dielectric Strength IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
B IEC 60601-1 Clause 14.8 - Architecture IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
somashekar Justification for Non-applicable clause at Stage 2, in clause 4. ISO 13485:2016 - Medical Device Quality Management Systems 11
T API SPEC Q1 Clause 5.6.1.2.C).2) First Article Oil and Gas Industry Standards and Regulations 16
A ISO Clause 4.1/4.2 & 6.1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
K ISO 9001 Clause 8.3 & 8.6 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
J ISO 9001:2015 Clause 8.5.1 Control of Production and service provision - Help with Work Instruction Access ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
P Maximum Mains Voltage (clause 8.5.3) IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
S IATF 16949 - Summary at a glance Clause wise - changes from ISO TS IATF 16949 - Automotive Quality Systems Standard 4
armani ISO 14001:2015 clause 4.4 ISO 14001:2015 Specific Discussions 2
M Customer Property - ISO 13485:2016 Clause 7.5.10 ISO 13485:2016 - Medical Device Quality Management Systems 9
D PSW with waiver statement (hold harmless clause) IATF 16949 - Automotive Quality Systems Standard 3
Ashland78 MSA clause or wording needed. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
A IT-NETWORK in PEMS Sub-Clause 14.13 for Medical Device IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
A 60601-1 clause 8.11.3.6 Test Clarification IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
S MSA clause 7.1.5.1.1 - Statistical studies on counting weight scale Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 12
T Internal NCR - API Q1 5.4.2b - API 16C Clause 4.1.3 Internal Auditing 9
L ISO 45001:2018 - Clause 5.4: Consultation and Participation of Workers Process Maps, Process Mapping and Turtle Diagrams 1
V Clause 7.1.3.1 Plant, facility, and equipment planning Lean in Manufacturing and Service Industries 0
J Aluminum anodization as MOP insulation? Clause 8.5.1.1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
ebrahim QMS as per ISO 13485, Clause 4.2 Requirements for regulatory purposes for Medical Devices Authorized Representatives. ISO 13485:2016 - Medical Device Quality Management Systems 3
R AS5553 Clause 3.1.7 f - "Implement a returns process....." AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5

Similar threads

Top Bottom