SBS - The best value in QMS software

Implementing ISO13485 in a new startup company - Neurological devices

S

SimonChan78

#1
Hi all,

My company will be establishing the ISO13485 standard for our neurological devices.

As we are a start-up company , what will be the best way to go about it in terms of cost saving?

Appreciate you help in this matter.

Thanks
Simon :)
 
Elsmar Forum Sponsor

somashekar

Staff member
Super Moderator
#2
Re: New to ISO13485

Hi all,

My company will be establishing the ISO13485 standard for our neurological devices.

As we are a start-up company , what will be the best way to go about it in terms of cost saving?

Appreciate you help in this matter.

Thanks
Simon :)
Hi Simon...
Welcome to the cove...
Now that you have registered, by visiting your www.Elsmar.com forums and exploring all related threads for information and by visiting Post attachment where you can get plenty of worthy materials, forms / formats and presentation stuff, you can learn a lot about ISO13485 and save a lot of money and time.
But the best thing you can do is ask specific questions in the related sub-forums and seek response. Same time do not miss to see the similar discussion threads which you can find right down every page.
 
Last edited:
S

SimonChan78

#3
Re: New to ISO13485

Dear all,

If my product design is outsourced , can i exclude clause 7.3 Design and development ?

Thanks
 

harry

Super Moderator
#4
Re: New to ISO13485

...................... If my product design is outsourced , can i exclude clause 7.3 Design and development ? .......
Welcome to the Cove.


No. The 'determinant' is who is responsible for the design and not who carry out the design. When you outsourced, you are still responsible to provide input to the design, participate in the verification, review and validation and finally approve the final design.
 
S

SimonChan78

#6
Thanks for the information.

I am wondering if i need to include the DMR on the document control , as the MDD not going to distribute to USA ? And the only standard my company conform to is just ISO 13485.


Sorry if i have asked a repeated question.

regards
 

Marcelo

Inactive Registered Visitor
#7
ISO 13485 does require a DMR, it only does not use that name. It's the "file" mentioned at the end of 4.2.1. If you only have the DMR, then it needs to be part of the ISO 13485 system to fulfill that requirement,
 
S

SimonChan78

#8
Sorry for the many questions here; for the standards and guideline in the QMS, does the company need to include ISO 14971 for risk management?
 
Last edited by a moderator:

Marcelo

Inactive Registered Visitor
#9
Risk management yes (ISO 13485 requires risk management, although it's not very clear what the expectations are), ISO 14971 not necessarily, although it's best to use it.

Another tip - ISO 13485, and related standards, are not really standards to create a quality system, they are standards to evaluate quality systems.

If you want a document to guide you in creating a good quality system, you might take a look at ISO 9004, or a good book such as the ones from David Hoyle (my recommendation is aways the ISO 9001 Quality Systems Handbook).
 
N

njhoost

#10
Not to trample on anyone, or repeat anything but I must emphasis Document Controls (Approvals, Numbering, Revision Control, etc.) and Authority Identification and Designation (i.e. Process Owners, etc.). Basically making sure who makes and/or approves the docs and they are allowed/empowered to do so, revisions and recessions are well tracked.

Do it from the beginning. And honestly, any question you have will have a 97% chance of having already been well covered in another post. So always search well first.

Good luck.
 
Thread starter Similar threads Forum Replies Date
K Implementing ISO13485:2016 in the Middle of a New Device Project ISO 13485:2016 - Medical Device Quality Management Systems 1
0 Medical Device Distribution Centre and Implementing ISO13485 ISO 13485:2016 - Medical Device Quality Management Systems 1
H Implementing ISO22301 on a Limited Scope Business Continuity & Resiliency Planning (BCRP) 0
J Implementing an ISO 13485 QMS Software ISO 13485:2016 - Medical Device Quality Management Systems 6
Sravan Manchikanti How to interpret '8.3 Control of nonconforming product' for SaMD device while implementing ISO 13485 & MDSAP ISO 13485:2016 - Medical Device Quality Management Systems 7
L Implementing the PRRC role in a company EU Medical Device Regulations 5
A Implementing ISO 20000-1 - Where to start Other ISO and International Standards and European Regulations 2
B Lessons Learned Implementing ISO 50001 (Chemical Engineering Progress) Other ISO and International Standards and European Regulations 0
C How medical device manufacturers are implementing standards like GDPR and HIPAA Other ISO and International Standards and European Regulations 5
M Informational EU – Commission Implementing Decision (EU) as regards the designation of expert panels in the field of medical devices Medical Device and FDA Regulations and Standards News 0
R Implementing Design History Documents/ Technical Documents in the QMS ISO 13485:2016 - Medical Device Quality Management Systems 3
tnorton Lessons learned from implementing Customer Complaints Customer Complaints 1
M Informational Update – MDR and IVDR implementing measures rolling plan – 2 more NBs designated under the new regulations Medical Device and FDA Regulations and Standards News 0
S Implementing a 45001 Health & Safety standard - Internal audit plan wanted Internal Auditing 1
M Informational Commission Implementing Decision (EU) 2019/939 of 6 June 2019 designating issuing entities designated to operate a system for the assignment of Unique Medical Device and FDA Regulations and Standards News 0
J Implementing Machine Replacement Part Reverse engineering technology Manufacturing and Related Processes 3
Q Does anyone have experience implementing a QMS without ISO certification? Quality Manager and Management Related Issues 2
M Informational EU – April 2019 update of the MDR and IVDR implementing measures rolling plan Medical Device and FDA Regulations and Standards News 0
I First Time Implementing Document Control for ISO-9001 - how far back do you go? Document Control Systems, Procedures, Forms and Templates 15
M Medical Device News Last update of the MDR and IVDR implementing measures rolling plan – December 2018 Medical Device and FDA Regulations and Standards News 0
J Implementing EN 62304:2006 on existing and proven medical devices IEC 62304 - Medical Device Software Life Cycle Processes 6
M Medical Device News MDR and IVDR implementing measures rolling plan EU Medical Device Regulations 0
B Implementing an Escalation Process and Andon system Supplier Quality Assurance and other Supplier Issues 1
K EQMS question - Implementing an electronic QMS to support ISO 13485:2016 Quality Assurance and Compliance Software Tools and Solutions 4
T Is there any requirement to be compliant with IEC 62304 while implementing ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 5
A Compliance Obligations - Implementing 6.1.1 and 6.1.3 NOTE - Determine risks and... ISO 14001:2015 Specific Discussions 1
G Heavy Civil Construction Company Implementing ISO 9001:2015 for Certification ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
D Implementing 5S for Multiple Shop Floor Layout Workstations Lean in Manufacturing and Service Industries 2
N FDA Guidelines for implementing Continuous Improvement Process US Food and Drug Administration (FDA) 5
Q Easy Way of "Implementing" Risk in ISO 9001 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
N Implementing ISO 17025 in a Calibration Laboratory ISO 17025 related Discussions 8
E Does anyone have experience implementing a Tiered QMS? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
A Implementing an AS9100 Aerospace Quality System AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
L Implementing ISO 9001 in small Trading Company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
C Implementing a set of bore gages at a machine Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
A Implementing Risk Management in a Medical Device "Distributor Only" company ISO 13485:2016 - Medical Device Quality Management Systems 2
T Implementing a Suspect Counterfeit Identification Program Quality Manager and Management Related Issues 3
O Implementing Lean Intranet Sharepoint Lean in Manufacturing and Service Industries 6
F Implementing ISO 9001:2008 in a new Food Processing company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
J ISO 22301 - Implementing a Business Continuity Management System Business Continuity & Resiliency Planning (BCRP) 15
M Does anyone here have experience implementing PCI DSS (Data Security Standard) IEC 27001 - Information Security Management Systems (ISMS) 10
L Implementing a new quality management system for a new engineering company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
M Implementing ISO 9001 in an Assembly Plant ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
D Understanding and implementing ISO 17025 ISO 17025 related Discussions 9
Q Implementing ISO 9001 and ISO 22000 systems at the same time Document Control Systems, Procedures, Forms and Templates 2
E Implementing a Production Accountability Program Manufacturing and Related Processes 3
J Implementing a TrackWise eQMS System Quality Assurance and Compliance Software Tools and Solutions 3
S Help for Implementing a Quality Management System Quality Management System (QMS) Manuals 3
L Implementing an improvement program is like cooking! Imported Legacy Blogs 0
S Implementing a Quality Assurance Program Service Industry Specific Topics 3

Similar threads

Top Bottom