Incoming Receiving Inspection Form

K

KidPaddy

#1
hello guys, :)

does anyone have a general form or any form in regards to incoming inspection? not the aql or acceptance sampling but the sheet or form itself.
the one were using is made only for a particular item that are supplied to us, that is why we have a need for another version for the other items.

tnx a lot guys!

:thanks:

:thanx:
 
Elsmar Forum Sponsor
T

Ted Schmitt

#2
Re: Incoming Inspection Form

Attached is the form we use. We are an industrial valve company, so most of our inspections are based upon drawings and 90% of items to be inspected are dimensions on the parts being received.

Hope this helps
 

Attachments

Coury Ferguson

Moderator here to help
Staff member
Super Moderator
#3
Re: Incoming Inspection Form

hello guys, :)

does anyone have a general form or any form in regards to incoming inspection? not the aql or acceptance sampling but the sheet or form itself.
the one were using is made only for a particular item that are supplied to us, that is why we have a need for another version for the other items.

tnx a lot guys!

:thanks:

:thanx:
Are you looking for a specific form of the documentation of the received goods, or a documented result (Dimensional) of incoming inspection?
 
K

KidPaddy

#4
Re: Incoming Inspection Form wanted

thanks ted.

if you have both courey it will be much better....tnx a lot.

again much gratitude to you guys.

:D :thanx: :bigwave:
 

Coury Ferguson

Moderator here to help
Staff member
Super Moderator
#5
Re: Incoming Inspection Form wanted

if you have both courey it will be much better....tnx a lot. :D :thanx: :bigwave:
I use a simple (as of yet have no problems with our customers. Both Aerospace and commercial) evidence of the results of the inspections: My inspectors document the results right on the drawing itself at the applicable dimension. They also initial and date their results. I use an "Inspection Copy Only" drawing that are given to the inspectors to perform the inspection. I believe AS9100 requires a specific form be used to document the results of a FAI, but since our company wasn't required to be AS9100 registered, by any of our customers, we used the drawing the same way for FAI's.
 
Last edited:

Steve McQuality

Quality Engineer
#6
Re: Incoming Inspection Form wanted

hello guys, :)

does anyone have a general form or any form in regards to incoming inspection? not the aql or acceptance sampling but the sheet or form itself.
the one were using is made only for a particular item that are supplied to us, that is why we have a need for another version for the other items.

tnx a lot guys!

:thanks:

:thanx:
Good Morning KidPaddy:

Here's an example of an inspection form that we use. Our general inspection scheme is based on ASQ Z1.4. Some explanation is probably warranted...

The form shows Revision History at the top and P/N and Revision of the form at the bottom. P/N and Revision of the part inspected is in the upper right hand corner of the "Table". The columns, I hope, should be pretty self-explanatory. "Reference" is the equipment and/or reference standard used to inspect the given dimension and/or feature, "Dimension" is the dimension from the associated part drawing, "Extremes" are the dimensional tolerances - again directly from the drawing, "Qty. Inspected" is just that - how many parts were inspected, "Special Instruction" is where we define the inspection level for the given dimension.

For the Inspection Level, we either inspect 100%, AQL (which is typically our company standard AQL level - we use General Inspection Level II and you should choose your appropriate AQL level), and a term we've defined as "Eng. Use". This term is defined as a dimension or feature that, based on the incoming inspection history, criticallity of the dimension and supplier performance, is no longer inspected but is maintained on the form for historical reference. As defined in our inspection system, "Eng. Use" allows engineering to "reinstitute" this dimensional check if a problem is found with that dimension by writing a memo to file. Once the problem with this dimension is resolved with the Supplier, the "problem dimension" can then go back to "no longer inspected" or maybe we want to raise it back to AQL permanently. It merely limits the number of "CN" changes we need to make to the document.

...just another way of doing things. It works for us. I hope this helps.

-Steve
 

Attachments

Last edited:
K

KidPaddy

#7
Re: Incoming Receiving Inspection Form wanted

tnx a lot Steve. its a lot of help, variety of information is good. tnx.:magic:
 
Thread starter Similar threads Forum Replies Date
D Incoming (Receiving) Inspection - General form for incoming part inspection Document Control Systems, Procedures, Forms and Templates 17
L How to define R & D Receiving (Incoming) Inspection Plan Design and Development of Products and Processes 18
M Partial Incoming (Receiving) Inspection Delivery Inspection. Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
M Incoming (Receiving) Inspection Procedure - Please Review Supplier Quality Assurance and other Supplier Issues 7
K Incoming (Receiving) Inspection for Commodity Items used in Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 11
C Medical Device On The Floor Receiving (Incoming) Quality Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
T Is Material Certification Required for Incoming Material (Receiving) Inspection? Supplier Quality Assurance and other Supplier Issues 10
N How to apply Incoming (Receiving) Inspection to Customer Supplied Material? IATF 16949 - Automotive Quality Systems Standard 18
L Critical Characteristics in Incoming (Receiving) Inspection - Inspection Levels Inspection, Prints (Drawings), Testing, Sampling and Related Topics 18
P Implement FAI process in my Incoming (Receiving) Inspection Procedure ISO 13485:2016 - Medical Device Quality Management Systems 6
S Incoming Receiving Inspection from Sister Plant IATF 16949 - Automotive Quality Systems Standard 7
M Incoming Quality Receiving Inspection Report sample Supplier Quality Assurance and other Supplier Issues 2
M Incoming (Receiving) Inspection of SMT components Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
T Which control chart for incoming (receiving) inspection - Sample size of 10 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
G IPC-Std-610D Component Incoming (Receiving) Visual Inspection Various Other Specifications, Standards, and related Requirements 16
T I would like to implement ISO 2859 standard for Incoming (Receiving) Inspection Other ISO and International Standards and European Regulations 3
E Should we do Incoming Inspection (Receiving Inspection)? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 14
Z How to handle Incoming (Receiving) Inspection as a PFMEA item? FMEA and Control Plans 36
B Process FMEA Scope - Does PFMEA cover Incoming (Receiving) Inspection & Dock Audit? FMEA and Control Plans 8
L Incoming (Receiving) Inspection - Is it really necessary that we follow the AQL? AQL - Acceptable Quality Level 7
N Incoming Product Quality - Receiving inspection for chemical substance Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
C ISO13485 Incoming Receiving Parts Verification ISO 13485:2016 - Medical Device Quality Management Systems 13
K LEAN in the Incoming/Receiving Department Lean in Manufacturing and Service Industries 9
F Supplier Measurements vs. Incoming (Receiving) Measurements Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 16
B Sample Size for Incoming (Receiving) Materials and Parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
T Incoming (Receiving) Quality Control Laboratory for Raw Paper Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
P Incoming (Receiving) Components Inspections Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
J Incoming Inspection Records using Excel File ISO 13485:2016 - Medical Device Quality Management Systems 2
J Requirements as a Distributor for Incoming Inspection of Purchased Finished Medical Device Medical Device Related Regulations 0
J Action Not defined in procedure - NC - Incoming inspection AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
M Material incoming to the production process reflected in PFMEA FMEA and Control Plans 9
silentmonkey How to decide what characteristics need to be verified during incoming inspection? ISO 13485:2016 - Medical Device Quality Management Systems 5
I Incoming insepction needs repair - sell as "new", "brand new", or something else Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
T Primary & Secondary Inspection Definitions - Incoming, In-process & Final Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
Ajit Basrur Incoming Inspection for Instructions for Use (IFU) 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
R Is pre-conditioning supplier component before incoming inspection tests allowed? Quality Manager and Management Related Issues 16
T How to identify requirements for 'Incoming inspection' Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
J Incoming Inspection Plans under Design Control (part of DMR)? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
T Can incoming and outgoing areas be allocated inside the store? Other ISO and International Standards and European Regulations 1
R Policy Statement for FDA CFR 820 Acceptance Activities of Incoming Products. Other US Medical Device Regulations 1
M Incoming, In-Process, Final and Outgoing Quality Inspection Procedure examples Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
C Incoming Inspection Database Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
A Incoming Material Quality Assurance Cell Document Control Systems, Procedures, Forms and Templates 4
R PFMEA (process FMEA) for Incoming Material stage FMEA and Control Plans 7
C Incoming Inspection Acceptance Sampling by Variables and Minitab Quality Tools, Improvement and Analysis 1
S Calibration/Certification requirements for an Incoming Inspection Fixture Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
T Incorporating incoming procedures (ISO9001:2008) with ISO 13485:2003 Supplier Quality Assurance and other Supplier Issues 3
S IQC (Incoming Quality Control) requirement on Electric Power Adaptor for US and CE Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
Q Current Process Controls (Prevention) and Incoming Raw Material Inspections FMEA and Control Plans 8
M Incoming Source of Variation & Source of Variation in Process Flow Chart IATF 16949 - Automotive Quality Systems Standard 3

Similar threads

Top Bottom