Incoming (Receiving) Inspection of SMT components

M

MANATEC

#1
Dear All,

A very good morning to all.

Our company is into the manufacture of garage equipments. We are procuring a wide variety of electronic components in both discrete & smt packages.

My question is " Is incoming inspection required for the SMT type of electronic components". If yes, what are the basic parameters that are to be ensured at our incoming inspection. We are in the process of framing the Quality Assurance Plan for all our products & would like to freeze the same with a lot of help from the team in this forum.

Many thanks in advance...
 
Elsmar Forum Sponsor

Kales Veggie

People: The Vital Few
#2
Dear All,

A very good morning to all.

Our company is into the manufacture of garage equipments. We are procuring a wide variety of electronic components in both discrete & smt packages.

My question is " Is incoming inspection required for the SMT type of electronic components". If yes, what are the basic parameters that are to be ensured at our incoming inspection. We are in the process of framing the Quality Assurance Plan for all our products & would like to freeze the same with a lot of help from the team in this forum.

Many thanks in advance...
I think it is economically impossible for most SMT using companies to do an effective parameter inspection on SMT components.

My suggestion is:

- to verify the label on the reels and packaging
- to verify any markings/color codes on the components (use magnification)

You can do this on a sampling basis.
 
M

MANATEC

#3
Dear Kees,

Thanks for your reply.

Well frankly i have been following the same line but i am unable to convince my top management on the same. Is there any standard available for the same??

Thanks
 

Jen Kirley

Quality and Auditing Expert
Staff member
Admin
#4
Dear Kees,

Thanks for your reply.

Well frankly i have been following the same line but i am unable to convince my top management on the same. Is there any standard available for the same??

Thanks
What kind of inspection does your top management believe you should be doing?

When I did receiving inspection for aerospace components, my inspections were for physical characteristics and to verify other requirements were apparently met, to the extent they impacted the quality of what we produced when using them.

That included things like evidence of temperature controls and conformance to chemical requirements (C of C or C of A), lot numbers and manufacture dates for materials that expire, and dimensions of things that ended up impacting form and fit.

If my incoming parts included things like mother boards, there's a definite limit to my inspection capability. I'm not about to try to replace/repeat the inspection that should have been done at their manufacture. We have supplier quality control for that need.
 
M

MANATEC

#5
This is mainly standard SMT components like resistors,diodes,capacitors, transistors & IC's. We procure the same from authourised distributors or online at mouser,digikey. Our management wants us to verify the same for its performances but we at the quality dept say that just checking the part no is enough.
 
Thread starter Similar threads Forum Replies Date
D Incoming (Receiving) Inspection - General form for incoming part inspection Document Control Systems, Procedures, Forms and Templates 17
L How to define R & D Receiving (Incoming) Inspection Plan Design and Development of Products and Processes 18
M Partial Incoming (Receiving) Inspection Delivery Inspection. Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
M Incoming (Receiving) Inspection Procedure - Please Review Supplier Quality Assurance and other Supplier Issues 7
K Incoming (Receiving) Inspection for Commodity Items used in Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 11
C Medical Device On The Floor Receiving (Incoming) Quality Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
T Is Material Certification Required for Incoming Material (Receiving) Inspection? Supplier Quality Assurance and other Supplier Issues 10
N How to apply Incoming (Receiving) Inspection to Customer Supplied Material? IATF 16949 - Automotive Quality Systems Standard 18
L Critical Characteristics in Incoming (Receiving) Inspection - Inspection Levels Inspection, Prints (Drawings), Testing, Sampling and Related Topics 18
P Implement FAI process in my Incoming (Receiving) Inspection Procedure ISO 13485:2016 - Medical Device Quality Management Systems 6
S Incoming Receiving Inspection from Sister Plant IATF 16949 - Automotive Quality Systems Standard 7
M Incoming Quality Receiving Inspection Report sample Supplier Quality Assurance and other Supplier Issues 2
T Which control chart for incoming (receiving) inspection - Sample size of 10 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
G IPC-Std-610D Component Incoming (Receiving) Visual Inspection Various Other Specifications, Standards, and related Requirements 16
K Incoming Receiving Inspection Form Document Control Systems, Procedures, Forms and Templates 6
T I would like to implement ISO 2859 standard for Incoming (Receiving) Inspection Other ISO and International Standards and European Regulations 3
E Should we do Incoming Inspection (Receiving Inspection)? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 14
Z How to handle Incoming (Receiving) Inspection as a PFMEA item? FMEA and Control Plans 36
B Process FMEA Scope - Does PFMEA cover Incoming (Receiving) Inspection & Dock Audit? FMEA and Control Plans 8
L Incoming (Receiving) Inspection - Is it really necessary that we follow the AQL? AQL - Acceptable Quality Level 7
N Incoming Product Quality - Receiving inspection for chemical substance Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
C ISO13485 Incoming Receiving Parts Verification ISO 13485:2016 - Medical Device Quality Management Systems 13
K LEAN in the Incoming/Receiving Department Lean in Manufacturing and Service Industries 9
F Supplier Measurements vs. Incoming (Receiving) Measurements Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 16
B Sample Size for Incoming (Receiving) Materials and Parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
T Incoming (Receiving) Quality Control Laboratory for Raw Paper Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
P Incoming (Receiving) Components Inspections Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
J Incoming Inspection Records using Excel File ISO 13485:2016 - Medical Device Quality Management Systems 2
J Requirements as a Distributor for Incoming Inspection of Purchased Finished Medical Device Medical Device Related Regulations 0
J Action Not defined in procedure - NC - Incoming inspection AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
M Material incoming to the production process reflected in PFMEA FMEA and Control Plans 9
silentmonkey How to decide what characteristics need to be verified during incoming inspection? ISO 13485:2016 - Medical Device Quality Management Systems 5
I Incoming insepction needs repair - sell as "new", "brand new", or something else Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
T Primary & Secondary Inspection Definitions - Incoming, In-process & Final Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
Ajit Basrur Incoming Inspection for Instructions for Use (IFU) 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
R Is pre-conditioning supplier component before incoming inspection tests allowed? Quality Manager and Management Related Issues 16
T How to identify requirements for 'Incoming inspection' Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
J Incoming Inspection Plans under Design Control (part of DMR)? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
T Can incoming and outgoing areas be allocated inside the store? Other ISO and International Standards and European Regulations 1
R Policy Statement for FDA CFR 820 Acceptance Activities of Incoming Products. Other US Medical Device Regulations 1
M Incoming, In-Process, Final and Outgoing Quality Inspection Procedure examples Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
C Incoming Inspection Database Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
A Incoming Material Quality Assurance Cell Document Control Systems, Procedures, Forms and Templates 4
R PFMEA (process FMEA) for Incoming Material stage FMEA and Control Plans 7
C Incoming Inspection Acceptance Sampling by Variables and Minitab Quality Tools, Improvement and Analysis 1
S Calibration/Certification requirements for an Incoming Inspection Fixture Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
T Incorporating incoming procedures (ISO9001:2008) with ISO 13485:2003 Supplier Quality Assurance and other Supplier Issues 3
S IQC (Incoming Quality Control) requirement on Electric Power Adaptor for US and CE Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
Q Current Process Controls (Prevention) and Incoming Raw Material Inspections FMEA and Control Plans 8
M Incoming Source of Variation & Source of Variation in Process Flow Chart IATF 16949 - Automotive Quality Systems Standard 3

Similar threads

Top Bottom