Incompleted tasks from previous management review meeting

N

nurhakim

#1
Hi Coves,

We will be attending a MRM soon. However we still have few incomplete tasks from previous MRM. How well that the upcoming MRM can be held with the incomplete tasks?How should members of the meeting address the issue and can it be extended further, and closed when completed?

Thanks.
 
Elsmar Forum Sponsor

somashekar

Staff member
Super Moderator
#2
Hi Coves,

We will be attending a MRM soon. However we still have few incomplete tasks from previous MRM. How well that the upcoming MRM can be held with the incomplete tasks?How should members of the meeting address the issue and can it be extended further, and closed when completed?

Thanks.
Simple... The members present fact based information to the management, and justify to the management as to why it is incomplete and needs to be extended further.
If it was of such importance to the company, it would have been executed. However as few tasks are incomplete, management may give the OK to extend and complete, or give other directions and / or ask for alternative approach. Record these as well ...
 
Thread starter Similar threads Forum Replies Date
Q Example Process orientation to the process leadership, management, goals (tasks of the top management) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
D How to ensure independence and authority necessary to perform QM tasks ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
N Gantt Chart / Time Tracker in Excel - Combining Tasks on the Same Line Excel .xls Spreadsheet Templates and Tools 2
M Checksheet for each QC department to record their daily tasks on an hourly basis Document Control Systems, Procedures, Forms and Templates 15
K Task and Sub Tasks of Software Life Cycle Phase Quality Assurance and Compliance Software Tools and Solutions 1
A The main functions and tasks of a Regulatory Affairs position Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 4
B Security Officer Resources, Tasks and Responsibilities IEC 27001 - Information Security Management Systems (ISMS) 3
D How to verify a process that uses software to accomplish certain tasks? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
T Quality tasks for each Design Control Phase ISO 13485:2016 - Medical Device Quality Management Systems 4
2 Lean Approach to Implementing Automated Administrative Tasks Lean in Manufacturing and Service Industries 2
P Are Sales Offices with limited and controlled tasks Remote Locations IATF 16949 - Automotive Quality Systems Standard 3
Douglas E. Purdy Personnel performing specific assigned tasks shall be qualified - Interpretation IATF 16949 - Automotive Quality Systems Standard 6
M Quality Assurance Manager - Tasks and Responsibilities...? Career and Occupation Discussions 9
S Competence (4.4.2) Records - Contractors who carry out skilled maintenance tasks Miscellaneous Environmental Standards and EMS Related Discussions 8
R 4.18 - Defining 'Specific Assigned Tasks' ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
M Gap analysis on ISO 14971:2019 with previous revision ISO 14971 - Medical Device Risk Management 3
W Internal Auditing carried out by a 3rd party - Review of previous audits AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
M Informational Commission Regulation (EU) 2019/319 of 6 February 2019 amending previous regulations as regards health certification at import into the Union concerni Medical Device and FDA Regulations and Standards News 0
Sidney Vianna IAQG News Future AS9147- Management of Unsalvageable Parts - Previous scrap parts AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
S MDD in 2018 - Company with no previous EU approval EU Medical Device Regulations 1
S Our products borrow DHF documents from a previous DHF for another product ISO 13485:2016 - Medical Device Quality Management Systems 2
T Technical File - Previous Device Generations EU Medical Device Regulations 2
C Leveraging previous results in IQOQs - Environmentally Controlled Room 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
K Internal Auditing a previous Nonconformance? Internal Auditing 19
N How I should process previous non-conformities on documents or records? ISO 13485:2016 - Medical Device Quality Management Systems 4
Ajit Basrur Medical device recalls in Q2 2013 were 30% higher than previous quarter ! Other US Medical Device Regulations 2
R KPI Review Meetings never discusses previous meeting action plan status Quality Manager and Management Related Issues 5
D Assessing the Validity of Previous Measuring Results? General Measurement Device and Calibration Topics 8
M CQI-11 & CQI-12 Version 2 - Changes from the previous version IATF 16949 - Automotive Quality Systems Standard 3
M ISO 9001 Quality Manual - Is it OK for me to use content from my previous company? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
G A2LA's ISO/IEC 17025 and Accreditation Training - Opinions from previous attendees ISO 17025 related Discussions 2
jasonb067 Applying Previous Failures to new PFMEA APQP and PPAP 2
A Inspection Check and Validation of work from the previous operation Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
B Electronic Copies of previous versions of Controlled Documents in editable format Document Control Systems, Procedures, Forms and Templates 3
H Working from a previous design history. How can I best leverage the exisitng DHF? Other US Medical Device Regulations 4
D Beta > 1 for new design? Durability test for a new system and no previous test data Reliability Analysis - Predictions, Testing and Standards 1
J Drawings and previous revisions, control ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
Q Looking for a certain article in previous issues of Quality Digest World News 6
Q Registrar Comparison - Searching for previous post related to Registrar Comparison IATF 16949 - Automotive Quality Systems Standard 1
P Disposal of obsolete documents - Mandatory in ISO9001:2000 to keep previous versions? Document Control Systems, Procedures, Forms and Templates 7
R Control of Documents - Change history question - Changes from previous revision OK? Document Control Systems, Procedures, Forms and Templates 11
M 7.6 - Validity of the previous measuring results - Is this what validity means? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
T Review the validity of previous monitoring and measuring results ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
G 7.6 Validity Of Previous Measuring Results General Measurement Device and Calibration Topics 2
Q Previous Sanctioned Interpretations QS-9000 - American Automotive Manufacturers Standard 1
E Validity of previous inspections when equipment is found out of calibration Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
D Previous Inspections - Gages used to calibrate other gages Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
C Calibration Revisited, software too - Previous approach was to calibrate everything General Measurement Device and Calibration Topics 5

Similar threads

Top Bottom