Inmate-Produced Combat Helmets Found Defective

Elsmar Forum Sponsor

Randy

Super Moderator
#2
It's amazing how quality improves when the inspector has to do actual testing of the product like I did on helicopters when I strapped them to my butt and test flew in them
 

Marc

Hunkered Down for the Duration
Staff member
Admin
#3
Interesting read...
Hint...

Inmate-Produced Combat Helmets Found Defective

A wholly-owned government corporation and private manufacturer made over $30 million on helmets before an investigation shut down the facility and fined the company.
 

Candi1024

Quite Involved in Discussions
#5
"..manufacturing documents were altered by inmates at the direction of FPI staff that falsely indicated helmets passed inspection and met contract specifications."

"The FPI Beaumont facility that manufactured the ACH and LMCH helmets was closed and its entire staff transferred to other duties within the Federal Bureau of Prisons. "

Wow
 
Thread starter Similar threads Forum Replies Date
Wes Bucey Which are you - inmate or visitor? Funny Stuff - Jokes and Humour 22
F Firmware as SOUP - Sensor with third party produced firmware IEC 62304 - Medical Device Software Life Cycle Processes 2
S FAIR - If we have not produced a part in over 2 years, but nothing has changed AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
J Extent of 2017/745: providing 3rd party mass produced devices to NHS patients EU Medical Device Regulations 0
A Uncertainty Budget - Externally produced sensor module Measurement Uncertainty (MU) 1
M EN60601-1-2 4th edition requirements - Tests for devices produced in two options IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
C Method of Monitoring our Internally Produced Non-Conforming Products Quality Tools, Improvement and Analysis 7
J SC and the linkage between CP and PFMEA ? When it?s being produced or controlled? IATF 16949 - Automotive Quality Systems Standard 4
P CE Marking IVDs produced under ISO 9001 CE Marking (Conformité Européene) / CB Scheme 1
N Why Would Produced Rubber Product Smell Like Diesel? Manufacturing and Related Processes 13
C Anvisa Manufacturer Audit - Product produced at two different Sites Other Medical Device Regulations World-Wide 3
D PSW for Level 1 for a Part Produced for an Order Last Year APQP and PPAP 11
I CAPA Closure for a seldom produced item Nonconformance and Corrective Action 18
L Injection Moulding - Definitions of T0, T1 Samples produced from new mold tooling Manufacturing and Related Processes 11
L Selling Products Produced before First Article Inspection (FAI) Approval AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
B Validation of IVD - Existing Product produced with New Machine ISO 13485:2016 - Medical Device Quality Management Systems 6
arios Medical Devices produced during OQ runs. Are they saleable product? Other US Medical Device Regulations 5
apestate Ground Tooling produced from OEM Blueprints - Part 21? Of WHAT? Federal Aviation Administration (FAA) Standards and Requirements 9
E Regulation for QC Testing of GMP Produced Biopharmaceuticals Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 5
Ron Rompen Permanent Part Identification - Parts produced during system over-ride Manufacturing and Related Processes 3
C Machined Parts PFMEA - Example of a CNC produced part PFMEA wanted FMEA and Control Plans 1
L SPC in Low Volume Manufacturing - 5 flanges will be produced per month Statistical Analysis Tools, Techniques and SPC 16
M New to AS9100 - Clause 7.5.3 - Do you have to identify each part produced AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
E Which control charts to monitor waste produced on the shop floor Statistical Analysis Tools, Techniques and SPC 5
R Sampling plans for mass-produced fasteners - I'm concerned with PPM and AOQL Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
H Does internal ppm include defects produced while adjusting the machine? Records and Data - Quality, Legal and Other Evidence 22
D First Article Applicability - All parts produced or just the Aerospace parts? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 29
D What to do to keep ISO 13485 cert when medical device is not produced anymore? ISO 13485:2016 - Medical Device Quality Management Systems 13
Z How many charts we need? Different sizes of part produced in the same line Statistical Analysis Tools, Techniques and SPC 2
T Burn out - Tips to help combat QC burnout Career and Occupation Discussions 9
B How do you combat boredom in Quality (in Small company)? Misc. Quality Assurance and Business Systems Related Topics 20

Similar threads

Top Bottom