Input - Joint Auditing Standard

Marc

Fully vaccinated are you?
Leader
Subject: REQ: Input - Joint Auditing Standard
Date: Wed, 14 Jul 1999 14:37:33 -0600
From: ISO Standards Discussion

From: Dennis Arter
Subject: REQ: Input - Joint Auditing Standard

First Exposure Draft of Joint Auditing Standard

An international working group has drafted a new joint standard for quality and environmental auditing. They are asking for comments from national bodies prior to meeting in San Francisco in September. This standard is still in the drafting stages. Opportunities remain to significantly modify and improve its content.

The USA members of the writing group would like input from potential USA users. (Others are asked to contact their own national standards-writing bodies.) Your thoughts and constructive comments are needed at this important time in the development process. The timeline is very short. We need your input by July 30, 1999, so that we may process our national comments before the international deadline.

If you want a copy of the working draft, along with the required comment template, please send an e-mail message to John Stratton or Mike Ross. They will attach the Microsoft Word files to a reply. Comments received without specific changes shown on the template cannot be used. All comments for this draft document must be received by John or Mike by the end of July.

-----------------------------
Dennis R. Arter
 

Marc

Fully vaccinated are you?
Leader
Well, I threw away all of the list messages this morning as I 'distilled' them. I checked what is here in the forum - searched for Dennis Arter - found a couple but - like in this message there is no return e-mail address. He's 'The Audit Guy' and is involved in the ASQC so I suppose a call to the ASQC would get his e-mail.

I'll post it as soon as it appears in a list serve summary. Sorry to throw out teasing tidbits like this. Being from Ohio, I should have looked closer.
 
Thread starter Similar threads Forum Replies Date
B How much staff input into the QMS is expected? Quality Manager and Management Related Issues 6
J Design Input Verification 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
G Medical Device Auditor (CMDA) certification exam by ASQ - looking for input Career and Occupation Discussions 3
T IMDS submission without supplier's input? RoHS, REACH, ELV, IMDS and Restricted Substances 5
I Realization processes input into overall risk ISO 14971 - Medical Device Risk Management 2
N Example for design and development planning,input,output,review,verification,validation and transfer Misc. Quality Assurance and Business Systems Related Topics 5
T Design Input detail & specificity ISO 13485:2016 - Medical Device Quality Management Systems 6
Watchcat Input needed from MDR Gurus! EU Medical Device Regulations 0
W ISO 9001:2015 Management Review Input Template wanted ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
shimonv Design input/output traceability for mechanical parts ISO 13485:2016 - Medical Device Quality Management Systems 31
E IEC 60335-1 power input deviation - Table 1 Values Other ISO and International Standards and European Regulations 0
QIE Electronic IFU - new project, need input Other Medical Device and Orthopedic Related Topics 2
E Input to ANOVA 1-WAY - How can I perform this analysis in minitab? Using Minitab Software 2
N Looking for input on the attached Process / IATF 16949 Clause Matrix IATF 16949 - Automotive Quality Systems Standard 4
N Regression Model (Minitab 18) - Which values my input parameters should have Using Minitab Software 2
V Screening DOE with 7 Input factors and 4 responses - Significant factors Using Minitab Software 1
L IATF 16949 Cl. 8.3.3.2 Manufacturing process design input - Process capability IATF 16949 - Automotive Quality Systems Standard 1
J What classifies something as "automotive"? Looking for input? IATF 16949 - Automotive Quality Systems Standard 11
B IATF 16949 Section Clause 8.3.4.1 - Monitoring - Design and Development Input(s) IATF 16949 - Automotive Quality Systems Standard 3
S Referencing International Standards as Design Input Design and Development of Products and Processes 5
H Looking for advice, input, tips on taking the AATT AS9101F Test AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
I First Piece Inspection classified as a Key Process Input FMEA and Control Plans 2
D Any Product Design Input sample for Colonoscope devices 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
Cats Clause Practical use of Heat Input calculation for Manual MIG Welding Manufacturing and Related Processes 4
O Test of Significance for Input Variables Statistical Analysis Tools, Techniques and SPC 2
P Medical Device Marking - Power Input Ports IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
K How to determine rated input power for the markings? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
R Master Level - I would appreciate any input on a Master Level Calibration and Metrology Software and Hardware 1
S OHSAS 18001 Typical Input and Output Examples Occupational Health & Safety Management Standards 4
Q When is a Design Input Good Enough? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
T Medical Device Touchscreen Input IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
S Input to Ouput Dielectric Strength PSU IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
A Are Software Requirements Specifications part of Design Input? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
V ISO 9001 Clause 5.6.2(f) Management Review Input in a Small Company Management Review Meetings and related Processes 7
V EMEA/UK cGMPs Requirements for Pre-Shipment Samples, Input Materials US Food and Drug Administration (FDA) 0
M Input regarding A9100 Supplier Qualification Requirements Supplier Quality Assurance and other Supplier Issues 8
Manix Supplier Control and Development Presentation for a Job Interview - Input Requested Supplier Quality Assurance and other Supplier Issues 5
R Definition Process Performance interpretation - Management Review Input 5.6.2 (c) Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 11
V In what conditions are sterile-API required as an input? US Food and Drug Administration (FDA) 1
A Implementation of Design Input Requirements 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
M Seeking input for a process-based quality management system training course ISO 13485:2016 - Medical Device Quality Management Systems 1
M AS9100 5.6.2(c) Review Input: Process Performance - Detailed explanation needed AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
D Auditing against a procedure you had input to Internal Auditing 19
R Spacing between the solder eyes of the fuse input/output leads IEC 60601 - Medical Electrical Equipment Safety Standards Series 17
R Should Medical Device SIGNAL INPUT/OUTPUT PART be overloaded? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
R Power Input Marking requirements in IEC 60601 and IEC 60950 IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
A Management Review Meeting (MRM) Input & Output Interpretation Management Review Meetings and related Processes 7
K Employee ESD Protection Methodologies - Need input. Training - Internal, External, Online and Distance Learning 8
T Input/Output/Specifications - Records vs. Forms 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 9
S Input and Verification of a Line Extension Design and Development of Products and Processes 3

Similar threads

Top Bottom