Inspection Capability Study (Kappa Analysis / Attribute R&R) as Certification Req't

Apoch

Starting to get Involved
#1
Hello All,

I am planning to institutionalize in our manufacturing company the requirement to conduct inspection capability study on inspectors through Kappa Analysis or Attribute R&R. I believe that this is essential in assessing the effectiveness of the inspection.

Is there an industry standard to back this requirement up? I can't see this specifically mentioned in ISO/TS 16949.
 
Last edited:
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
Re: Inspection Capability Study (Kappa Analysis / Attribute R&R) as Certification Req

A Quick Bump!

Can someone help?

Thank you very much!!
 

Jim Wynne

Staff member
Admin
#4
Hello All,

I am planning to institutionalize in our manufacturing company the requirement to conduct inspection capability study on inspectors through Kappa Analysis or Attribute R&R. I believe that this is essential in assessing the effectiveness of the inspection.

Is there an industry standard to back this requirement up? I can't see this specifically mentioned in ISO/TS 16949.
Are you trying to assess the competence of inspectors? More information would be good.
 

Bev D

Heretical Statistician
Staff member
Super Moderator
#5
It's not in any industry standard that I know of. But it isn't unheard of as a means of 'calibrating' or 'qualifying' visual inspectors. My organization performs such tests for critical visual inspections.

but it will be helpful if you could provide additional information as Jim requested...
 

Apoch

Starting to get Involved
#6
Hello all,

Yes, we are trying to assess the effectiveness of the inspection by operators. We have various inspection escapees resulting in customer complaints at the moment.

Aside from improving the inspection methodology, rigorous training, we would like know whether the operators can repeatedly judge what is a bad part from a good part.
 

Bev D

Heretical Statistician
Staff member
Super Moderator
#7
Kappa study will work for you...what else do you want to understand?
There are some nuances to designing a useful study for this purpose - would you like additional information on this?
 

Apoch

Starting to get Involved
#8
Re: Inspection Capability Study (Kappa Analysis / Attribute R&R) as Certification Req

Thanks Bev D. I have tried running Kappa Analysis before using SAS JMP.
Sure, please share additional inputs.
 
Thread starter Similar threads Forum Replies Date
Barahir Visual Inspection - Capability Study on Attribute Data Capability, Accuracy and Stability - Processes, Machines, etc. 13
V Process Capability to reconfirm the Inspection Frequency Manufacturing and Related Processes 3
J Reduction of Pull Off Test Inspection Frequency - Capability Query Quality Tools, Improvement and Analysis 1
J Heat treatment inspection and Process capability index Cpk Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
S Regarding in-process inspection - Can any one explain about online capability? IATF 16949 - Automotive Quality Systems Standard 5
D Process Capability & Inspection Frequency: Is there any relationship? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
P Need a programmer for QVI's VMS software for optical inspection machine Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
silentmonkey How to decide what characteristics need to be verified during incoming inspection? ISO 13485:2016 - Medical Device Quality Management Systems 5
Y What are different Special Inspection Level 1-4 and General spesification 1-3 ? AQL - Acceptable Quality Level 0
J Mechanical inspection techniques of close tolerance parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
T Help to Suggest name for a new certification and inspection company Coffee Break and Water Cooler Discussions 7
B GM GP-12 Exit Criteria - Additional Safe Launch Inspection - (Also see GM1927-28 ) Customer and Company Specific Requirements 2
S Process Inspection -Sub assembly process inspection sheet Lean in Manufacturing and Service Industries 3
C OEE and In-process Inspection Manufacturing and Related Processes 2
R AS9100 - 8.4.2 - Receiving Inspection Requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
I Mother bobbin final inspection criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
Marc Visual Inspection - Color Vision Coffee Break and Water Cooler Discussions 15
G Inspection Logs - Asked to remove an Inspection Sheet ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
Skooma Receiving Inspection - Boss trying to save money AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
T Sample of 1st Article Inspection Report wanted APQP and PPAP 3
T Nonconforming product at customer detected by a routine inspection by field service Nonconformance and Corrective Action 9
A Definition of customer in ITP (Inspection & Test Plan) Contract Review Process 3
T Correct MSA study for an automated camera system which makes attribute inspection Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
A DCMA inspection for a drop-shipment AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
S QUALITY OBJECTIVEs for third party garments factory inspection ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
D Lean and Elimination of QC Inspection Points in a New factory Lean in Manufacturing and Service Industries 9
F FDA-registration and inspection cost 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
I Receiving Inspection Requirement in IATF IATF 16949 - Automotive Quality Systems Standard 3
R Supplier related drawings and verification of process requirements - Source Inspection AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
D AS9100 Inspection records - Is there a requirement to have gauge ID and calibration status AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
D Good Acceptance Activity/Inspection flowchart for reference - Wanted Please Process Maps, Process Mapping and Turtle Diagrams 2
K Inspection Certificate EN 10204 2.1 - Distribution company Other ISO and International Standards and European Regulations 4
S Improving Quality inspection gate in one piece flow manufacturing process Manufacturing and Related Processes 0
M Loss of a Quality Record - FDA Inspection Records and Data - Quality, Legal and Other Evidence 4
S Need Assistance in Visual Inspection - Tiny electronic components AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
S. Moore Is an Annual Layout Inspection the same as an Annual Re-validation? Internal Auditing 1
D Incoming (Receiving) Inspection - General form for incoming part inspection Document Control Systems, Procedures, Forms and Templates 17
K First Article Inspection (FAI) - Equipment used - Dimensions vs. Go/No-Go ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
M Informational USFDA Draft Guidance – Review and Update of Device Establishment Inspection Processes and Standards Medical Device and FDA Regulations and Standards News 0
S Inspection/sampling economics Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
C Is a First Article Inspection (FAI) Procedure required by ISO 13485? ISO 13485:2016 - Medical Device Quality Management Systems 3
T EN 10204 3.1 Inspection Certificate - Machine Shop Various Other Specifications, Standards, and related Requirements 4
A Doubt on multiple inspection carrying out for same balloon number during Stage Inspection and Final Inspection? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
M 3rd Party Sorting and Inspection Company Certification Service Industry Specific Topics 4
D FDA QSR task checklist based on inspection citations 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
John Predmore What size pinhole can be reliably detected using visual inspection? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
F Holes position inspection - Calculation of centre distance and plug sizes of a gauge Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
V Inspection with 3D Scanning - Reference Data Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
L Inspection Plan for Microscope Objective Lens Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
N Process Flow diagram steps for inspection and packaging APQP and PPAP 4

Similar threads

Top Bottom