Inspection Criteria for Foreign Objects in LCD Assemblies needed

normzone

Trusted Information Resource
#1
I need to come up with a document defining acceptable and unacceptable sizes and locations for foreign objects (primarily lint or dust) in LCD assemblies, between the LCD and the protective shield.

Yes, I know that eliminating the problem would be a better use of my time, and I'm working on that.

I was wondering if anyone knew of an existing document I could file the serial numbers off of and reuse.

Thanks
normzone
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
I need to come up with a document defining acceptable and unacceptable sizes and locations for foreign objects (primarily lint or dust) in LCD assemblies, between the LCD and the protective shield.

Yes, I know that eliminating the problem would be a better use of my time, and I'm working on that.

I was wondering if anyone knew of an existing document I could file the serial numbers off of and reuse.

Thanks
normzone
Hello normzone,

Could this be of help, or am I way off base?

http://alpha.fi/support/download/LC104S1.pdf

http://www.touchinternational.com/literature/specs/capacitive_specs.pdf

http://www.pacer.co.uk/jkcm/cache/fl0000894.pdf

Stijloor.
 
Thread starter Similar threads Forum Replies Date
B GM GP-12 Exit Criteria - Additional Safe Launch Inspection - (Also see GM1927-28 ) Customer and Company Specific Requirements 2
I Mother bobbin final inspection criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
M Wire Harness Line Process and Inspection Criteria Manufacturing and Related Processes 9
B Customer Inspection Frequency and Rejection Level Criteria - Sample Lot Size AQL - Acceptable Quality Level 6
L First Article Inspection Criteria for Medical Device Manufacturers Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
M Standards Australia - AS1199.3 2003 Skip Lot inspection Criteria and Requirements Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
L Criteria for Establishing Control Plan Sample Size and Inspection Frequency FMEA and Control Plans 7
S Is there an Accept/Reject Criteria for 100% Inspection? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
K Visual inspection and acceptance criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
C Is there a JEDEC, EIA or Military standard for Chip Scale Package Inspection Criteria Various Other Specifications, Standards, and related Requirements 5
J Screw Thread Inspection Standards? Double Ended Stud Inspection Criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
D Guidance for Developing Inspection and Test Criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
Marc Inspection Criteria - ISO 14253-1 is actually a disguised guardband Other ISO and International Standards and European Regulations 1
J Incoming Inspection Records using Excel File ISO 13485:2016 - Medical Device Quality Management Systems 2
J Requirements as a Distributor for Incoming Inspection of Purchased Finished Medical Device Medical Device Related Regulations 0
J Action Not defined in procedure - NC - Incoming inspection AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
S Annual Inspection Layout - Based on Customer print ? IATF 16949 - Automotive Quality Systems Standard 8
I Overwhelmed with attribute MSA requirement for visual inspection IATF 16949 - Automotive Quality Systems Standard 8
K Visual Inspection Effectiveness Inspection, Prints (Drawings), Testing, Sampling and Related Topics 16
B 4DINSPEC Inspection Equipment General Measurement Device and Calibration Topics 0
A Fabric roll inspection - What type of Control Chart to use? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
B Industrial RX inspection of welds (Oil&Gas industry) Reliability Analysis - Predictions, Testing and Standards 0
C In-process inspection - Tooling and assembly lines for automotive companies AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
D FAA inspection at my repair station - Rating Check Federal Aviation Administration (FAA) Standards and Requirements 0
G Supplier delivered recent PPAP, should he deliver yearly layout inspection? IATF 16949 - Automotive Quality Systems Standard 4
R Inspection and Work order process Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
M Determining a tolerance value for Measuring devices in-house inspection General Measurement Device and Calibration Topics 12
P Need a programmer for QVI's VMS software for optical inspection machine Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
silentmonkey How to decide what characteristics need to be verified during incoming inspection? ISO 13485:2016 - Medical Device Quality Management Systems 5
Y What are different Special Inspection Level 1-4 and General spesification 1-3 ? AQL - Acceptable Quality Level 0
J Mechanical inspection techniques of close tolerance parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
T Help to Suggest name for a new certification and inspection company Coffee Break and Water Cooler Discussions 7
S Process Inspection -Sub assembly process inspection sheet Lean in Manufacturing and Service Industries 3
C OEE and In-process Inspection Manufacturing and Related Processes 2
R AS9100 - 8.4.2 - Receiving Inspection Requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
Marc Visual Inspection - Color Vision Coffee Break and Water Cooler Discussions 15
G Inspection Logs - Asked to remove an Inspection Sheet ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
Skooma Receiving Inspection - Boss trying to save money AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
T Sample of 1st Article Inspection Report wanted APQP and PPAP 3
T Nonconforming product at customer detected by a routine inspection by field service Nonconformance and Corrective Action 9
A Definition of customer in ITP (Inspection & Test Plan) Contract Review Process 3
T Correct MSA study for an automated camera system which makes attribute inspection Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
A DCMA inspection for a drop-shipment AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
S QUALITY OBJECTIVEs for third party garments factory inspection ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
D Lean and Elimination of QC Inspection Points in a New factory Lean in Manufacturing and Service Industries 9
F FDA-registration and inspection cost 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
I Receiving Inspection Requirement in IATF IATF 16949 - Automotive Quality Systems Standard 3
R Supplier related drawings and verification of process requirements - Source Inspection AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
D AS9100 Inspection records - Is there a requirement to have gauge ID and calibration status AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
D Good Acceptance Activity/Inspection flowchart for reference - Wanted Please Process Maps, Process Mapping and Turtle Diagrams 2

Similar threads

Top Bottom