I.2.2.7 Dimensional results
The supplier shall provide evidence that dimensional verifications required by the design record and the Control Plan
have been completed and results indicate compliance with specified requirements. The supplier shall have dimensional
results for each unique manufacturing process, e.g. cells or production lines and all cavities, molds, patterns or dies (see
I.2.2.13). My emphasis
I.2.2.13
The supplier shall indicate the date of the design record, change level, and any authorized engineering change document
not yet incorporated in the design record to which the part was made.
The supplier shall identify one of the parts measured as the master sample (See I.2.2.17).
If production parts will be produced from more than one cavity, mold, tool, die, pattern, or production process, e.g. line
or cell, the supplier shall complete a dimensional evaluation (see I.2.2.7) on one part from each. The specific cavities,
molds, line, etc., shall then be identified in the “Mold/Cavity/Production Process” line on a PSW, or in a PSW attachment.