Interior Design Company Design Procedure Example wanted (ISO 9001:2008)

I

IMS Manager

Hi Folks,

I am reviewing the company procedure(s) relating to design and was wondering if there is a design procedure format that follows section 7.3 of 9001:2008.

I would like it if someone could give me an example of an interior design company procedure (Australia based)

Thanks in advance,

IMS Manager
 
M

Marcelo

Inactive Registered Visitor
Re: Design Procedure 9001:2008

I don't have a design procedure format, because it really depends on how your organization approaches design and development., however, I can offer come comments:

Please note that the standard defines controls for a design process, not the design process itself.

Please see the following thread for an explanation : http://elsmar.com/Forums/showthread.php?t=36432&highlight=conceptual+design+mmantunes

The design control requirements from 7.3 can be better understood using the attached waterfall model.

So, what you need to do is:

1 - define the design and development process for your organization
2 - include any needed process control to this process, including the controls required by 7.3
 
I

IMS Manager

Re: Design Procedure 9001:2008

Hi Marcelo,

Thanks for your reply.

I understand what you are saying.

I only just this morning was talking with our designer to map out the process so we could then fit the words and other info to it.

Many Thanks,

IMS Manager
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
P Flammability Testing of Aircraft Interior Materials Federal Aviation Administration (FAA) Standards and Requirements 0
D IMDS for Like Components (Interior Plastic, Leather/vinyl Armrest, etc.)other than Color APQP and PPAP 1
S An overview of the automotive safety requirements around the globe; interior products IATF 16949 - Automotive Quality Systems Standard 3
hogheavenfarm Passivation Requirements for Interior Parts Manufacturing and Related Processes 6
Manix Automotive Interior Trim - Vibration Standards - Anyone suggest One? Various Other Specifications, Standards, and related Requirements 5
C Automotive Interior Standards (Class A & B) - Defect Allowances for Interior Trim Customer and Company Specific Requirements 1
S What's difference between fmvss302 and GM6090M? Flammability of interior materials Various Other Specifications, Standards, and related Requirements 5
T Tensile / Pull test standards / Specimens - 14 mil vinyl interior products Quality Tools, Improvement and Analysis 6
A Augmenting full factorial design to CCF Using Minitab Software 5
T Design and Development training AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
Nawal Design Review Requirments Manufacturing and Related Processes 3
R ANOVA MSA GR&R in ATE replacing operators (Error Design is not balanced) Using Minitab Software 6
G What is Design&Development and what is product in a Research company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
adztesla Design change and Process change Class 3 medical device Medical Device and FDA Regulations and Standards News 2
R ISO 13485:2016 DESIGN TRANSFER Forum News and General Information 0
adztesla Adding new supplier/ Medical device design change ISO 13485:2016 - Medical Device Quality Management Systems 2
T Clinical Study Design for IVD Self-Test (lay user) Products UK Medical Device Regulations 0
T Design of Experiment - Test for Curvature Quality Tools, Improvement and Analysis 4
I Design Verification Testing on Non-Validated Equipment ISO 13485:2016 - Medical Device Quality Management Systems 2
Z Design verification test sample size under the scope of first in human study submission in Europe Medical Device and FDA Regulations and Standards News 3
T Mandatory requirements for design verification sample 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 11
T Class B IEC 62304 - 5.4 Software Detailed Design IEC 62304 - Medical Device Software Life Cycle Processes 4
L Design Transfer Concept of cloud SaMD US Medical Device Regulations 2
M IVD Device Design Change Medical Device and FDA Regulations and Standards News 2
S Design and Development document ISO 13485:2016 - Medical Device Quality Management Systems 2
M Risk-based approach to Test Method Validation for Design Verification? US Medical Device Regulations 5
S Is design and development clause 8.3 applicable for laboratory ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
K Design: Verification Vs Validation And Validation Vs Transfer ISO 13485:2016 - Medical Device Quality Management Systems 19
L To control the essential design outputs Medical Device and FDA Regulations and Standards News 4
C MD Design and development procedure ISO 13485:2016 - Medical Device Quality Management Systems 1
B Validation of design for valve api 6d 25 edition ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 0
B Hi , everyone i need a procedure for validation of design prototype api 6d (valve manufacturing) Oil and Gas Industry Standards and Regulations 1
K Exclusion of 8.3 Design and Development for Design Companies ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
J Recognised/reputable courses for ISO 13485 Section 7.3 (Design & Development)? ISO 13485:2016 - Medical Device Quality Management Systems 1
J Design/Development. Oil and Gas Industry Standards and Regulations 6
O Regarding design and development requirements for a medical device EU Medical Device Regulations 6
W Rights of Supplier in Design & Build WP Manufacturing and Related Processes 0
K ISO 13485 Design Requirement with respect to "component" manufacturers ISO 13485:2016 - Medical Device Quality Management Systems 11
rob3027 ISO 13485 justification for design and development exclusion for medical packaging ISO 13485:2016 - Medical Device Quality Management Systems 18
K What constitutes design under 9001? Design and Development of Products and Processes 15
P Product Requirements Control during Design Changes Design and Development of Products and Processes 4
B Minitab factorial design regression equation center point term Manufacturing and Related Processes 5
J Design Input Verification 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
P Self Certified Class 1 MDR 2017/745 Design Change CE Marking (Conformité Européene) / CB Scheme 2
N Design V&V courses Career and Occupation Discussions 11
B AS9100 Design Authority questions AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
K Process FMEA responsible For "Make to Design Parts" (Inhouse or Suppliers ?) FMEA and Control Plans 3
K CE design Certificate EU Medical Device Regulations 3
M ISO 13485 consultants and auditors with design oriented focus ISO 13485:2016 - Medical Device Quality Management Systems 7
T Design Transfer & use of "prototype" components in production devices. ISO 13485:2016 - Medical Device Quality Management Systems 10

Similar threads

Top Bottom