Internal Calibration Laboratory Inspection/Approval

S

Slytrellis

Registered
#1
#1
Hi,

We are in the process of setting up an internal lab to handle our own inventory (Electrical, Temperature, Pressure, Torque, Mass etc.). As an airline we are EASA 145 approved, however the calibration lab falls outside of the EASA scope.

Our quality department want some sort of inspection/approval by a 3rd party however we do not want to go down the route of 17025 or obtaining a ISO approval.

Does anyone know of any organisations that can come in and do a review of the lab and its operations?

Thanks.
 
Quickly Organize an Intelligent TDP from DISCUS
Elsmar Forum Sponsor
Hershal

Hershal

Metrologist-Auditor
Staff member
Super Moderator
#2
#2
Absent an accrediting body, you best chance is a well qualified assessor who will do freelance as they have the credibility, or a consultant. Since you are in Doha, the Qatari authorities can also issue their own approval, which would be valid within Qatar and maybe all the UAE.

Hope this helps.
 
M

mkabiel

Starting to get Involved
#3
#3
I am in EgyptAir calibration lab and accredited by EGAC in Egypt.You can contact EGAC to accredit your lab and I am ready for any explanation
 
S

suhananyc

#4
#4
Hi Slytrellis,

May I know the update on your lab? Is it accredited under ISO17025? Is it compulsory for in-house calibration under EASA Part 145 to be ISO17025 certified?
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
B IATF 16949 - 7.1.5.3.1 Internal calibration laboratory requirements IATF 16949 - Automotive Quality Systems Standard 9
C MU (Measurement Uncertainty) in an Internal Calibration Laboratory Measurement Uncertainty (MU) 1
S Auditing TS 16949 Cl. 7.6.3.1 - Internal Calibration Laboratory Requirements IATF 16949 - Automotive Quality Systems Standard 8
K Internal laboratory - applies only to Calibration or also to other laboratories? IATF 16949 - Automotive Quality Systems Standard 6
R Standard Methods - Internal Calibration Laboratory - What if there is no standard? IATF 16949 - Automotive Quality Systems Standard 2
K Internal Calibration - Testing Laboratory General Measurement Device and Calibration Topics 9
M Company Internal Calibration - Is Internal Calibration a LABORATORY? TS16949 General Measurement Device and Calibration Topics 24
C Internal Audit of Internal Calibration Laboratory - Inspection sample size question Internal Auditing 2
D Internal Laboratory - Defining the Laboratory Scope - Inspection, Test, Calibration Inspection, Prints (Drawings), Testing, Sampling and Related Topics 18
L Internal Calibration Laboratory Requirements - Ambient temperature, Humidity, Etc. Statistical Analysis Tools, Techniques and SPC 3
V Does an internal calibration laboratory need to be certified on ISO 17025? ISO 17025 related Discussions 3
I Calibration Void Seals on Internal Equipment General Measurement Device and Calibration Topics 3
A Internal Calibration Process Suggestions General Measurement Device and Calibration Topics 6
C Basic Internal Calibration Procedure to check the Accuracy of a Balance Calibration Frequency (Interval) 6
N Internal Calibration vs. Accredited Calibration for Balance - Differences Calibration Frequency (Interval) 3
P Internal Calibration for Laser Temperature Gauges Manufacturing and Related Processes 3
N Scale with Internal Calibration - Do I need to calibrate? How to document this? Calibration Frequency (Interval) 8
L Calibration Procedure for Internal Spline Plug Gage Needed General Measurement Device and Calibration Topics 4
2 TS 16949 Cl. 7.6.3.1 - Internal Calibration Procedure not Traceable to ASTM, EN etc. IATF 16949 - Automotive Quality Systems Standard 20
H "Internal Calibration" using other Calibrated Equipment Calibration Frequency (Interval) 13
P Internal Calibration or Verification - Personnel Requirements IATF 16949 - Automotive Quality Systems Standard 3
M Internal tool calibration program - Best source to become "knowledgeable"? General Measurement Device and Calibration Topics 5
V Internal Scale and Balance Calibration Method Tolerances and Limits General Measurement Device and Calibration Topics 4
D ISO/TS16949 Internal Calibration Lab need to include Production Equipments IATF 16949 - Automotive Quality Systems Standard 26
M How to Internal Audit the Calibration Process Internal Auditing 12
C Internal Diameter Measurement and Pin Gage Calibration General Measurement Device and Calibration Topics 6
Q Internal Testing and Calibration Laboratories - MSA, Gage R&R and Control Plans IATF 16949 - Automotive Quality Systems Standard 2
K Should QS/TS certified internal test/calibration labs be required to be ISO17025 ISO 17025 related Discussions 16
M IATF - Internal Audit 3 year span Internal Auditing 3
T Internal NCR - API Q1 5.4.2b - API 16C Clause 4.1.3 Internal Auditing 4
Q ISO 9001-2015 Internal audit finding Internal Auditing 12
lanley liao How to understand this words that the planning of internal audit shall take into consideration the results of previous audits? Oil and Gas Industry Standards and Regulations 10
A Add MDSAP to Internal Audit Schedule Medical Device Related Regulations 0
J IATF 16949 Internal Audit question - Auditor's responsibility Internal Auditing 6
M ISO13485:2016, MDSAP and Internal Audits ISO 13485:2016 - Medical Device Quality Management Systems 8
S IATF 16949 Internal Audit Example IATF 16949 - Automotive Quality Systems Standard 11
R AS9100D internal audit checklist or ISO 9001 2015 to AS9100 D AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
S Would this be a second site for the purposes of internal and third party audits? General Auditing Discussions 4
V Internal Auditor Competency KPI IATF 16949 - Automotive Quality Systems Standard 14
J ISMS - Internal Audits Internal Auditing 5
M ISO 13485:2016 internal audit checklist Medical Device and FDA Regulations and Standards News 5
S ISO 9001:2015 Internal Auditing Internal Auditing 8
A Internal Audit Questions ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
L Documented Information in Internal Audits Process (9.2) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
salaheddine96 Internal audit planning Internal Auditing 2
D CB and customer audits considered as internal audits? General Auditing Discussions 9
M ISO 9001 Major Nonconformance Internal Audit Schedule/COVID-19 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
E MDR internal audit Internal Auditing 1
B Internal Auditor Competency - Product Auditors Internal Auditing 9
U Internal Auditor not trained but done Audit for some process Nonconformance and Corrective Action 5

Similar threads

Top Bottom