SBS - The Best Value in QMS software

IPC-A-610 E Thermal Plane Acceptance Criteria for D-Pak Component

J

joandevil

#1
#1
Recently I faced a doubt on IPC-A-610 acceptance criteria for D-Pak component. Could someone advice me on its thermal plane acceptance criteria? Is the component being allowed to has end overhang?

Normally if an end overhang is not allowed, the criteria will specify not permitted. However, for thermal plane, it specify no overhang? what is this mean actually?
 
Quickly Organize an Intelligent TDP from DISCUS
Elsmar Forum Sponsor
Marc

Marc

Fully vaccinated are you?
Staff member
Admin
#3
#3
One more quick "Bump" in case someone here can help with this one. My Thanks in advance!
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
S IPC-A-610 Class 3 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
K IPC-610 Section 10.4.2.2 clarification - Distance to be measured Various Other Specifications, Standards, and related Requirements 0
M IPC-A-610 vs. Our Specification - Not Staking Wire through a Bifurcated Terminal Various Other Specifications, Standards, and related Requirements 4
P PCB (Printed Circuit Board)/Electronics Inspection Training? IPC-A-610? Career and Occupation Discussions 10
D ANSI IPC A-610 Maximum Jumper Wires Allowed on Boards by the IPC Standard Various Other Specifications, Standards, and related Requirements 1
Q Help with ANSI/IPC-A-610 C - The acceptable position of right angle headers Various Other Specifications, Standards, and related Requirements 1
L IPC/EIA J-STD-001 (soldering) revisions (Want to replace IPC-A-610) Various Other Specifications, Standards, and related Requirements 5
M Electrical Assembly Standards - IPC-A-610 "Acceptability for Electronic Assemblies" Various Other Specifications, Standards, and related Requirements 7
N IPC-A-630 - Is this free or do i really need to pay for it? Manufacturing and Related Processes 4
M PCBA Drawing Best Practices IPC Class 3 ISO 13485:2016 - Medical Device Quality Management Systems 1
E IPC/WHMA-A-620C: Requirements and Acceptance for Cable and Wire Harness Assemblies Other ISO and International Standards and European Regulations 2
Q Form IPC 1720A Assembly Qualification Profile still required? Various Other Specifications, Standards, and related Requirements 1
R IPC Counterfeit Components Identification Training DVD-166C Training - Internal, External, Online and Distance Learning 3
L Best IPC curriculum for newbee in R&D Department Training - Internal, External, Online and Distance Learning 2
D IPC WHMA-A-620A vs. UL UL468A - Pull Test or Crimp Height Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
P IPC/WHMA-A-620, section 19.6 - Crimp Tools - 30 Day Calibration Period Requirement Calibration Frequency (Interval) 12
R Difference between IPC and IRCA Registrars and Notified Bodies 2
M IPC-A-610C/D Question Inside Other ISO and International Standards and European Regulations 2
S IPC 620 Standards vs. Company Engineering Drawings (Prints) Various Other Specifications, Standards, and related Requirements 3
S IPC 620 updating from Class 1 to Class 3 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
P IPC - In-Process Control - Definition Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
Q AS9100 and NADCAP - Our QM was told that referencing IPC 620 was acceptable AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
A Material Composition Declaration - IPC 175x RoHS, REACH, ELV, IMDS and Restricted Substances 2
J Does section 19 of IPC/WHMA-A-620A require Hi-pot testing of all cables? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
C The latest version of the IPC 1752 MC RoHS, REACH, ELV, IMDS and Restricted Substances 6
H How to correct typographical errors on IPC Certificates? Training - Internal, External, Online and Distance Learning 3
M Experience with IPC 1752 compliance? Manage and report ROHS information RoHS, REACH, ELV, IMDS and Restricted Substances 4
G Ball Grid Array (BGA) component Incoming Inspection IPC-7095 Various Other Specifications, Standards, and related Requirements 3
G IPC-Std-610D Component Incoming (Receiving) Visual Inspection Various Other Specifications, Standards, and related Requirements 16
A ROHS Materials Declaration Standard IPC-1752 free of charge for download RoHS, REACH, ELV, IMDS and Restricted Substances 3
C Where can I learn more about IPC-A-610D without training? Various Other Specifications, Standards, and related Requirements 9
J IPC/EIA J-STD-004 - Requirements for Soldering Fluxes Various Other Specifications, Standards, and related Requirements 3
1 IPC/EIA J-STD 001 to 004 for Solder Specification Various Other Specifications, Standards, and related Requirements 9
G Solderability - Objective Evidence of Conformity to Standards - J-STD-610 Manufacturing and Related Processes 1
D Looking for a Gigatronics 610 User's Manual or Service Manual or both General Measurement Device and Calibration Topics 3
I Lifetime Support Calculation - Thermal Operating Profile Reliability Analysis - Predictions, Testing and Standards 7
S Ring Gage Thermal Expansion General Measurement Device and Calibration Topics 4
E Solder thermal profiles for PPAP - Automotive IATF 16949 - Automotive Quality Systems Standard 1
V Regrinding Material - Thermal properties Manufacturing and Related Processes 4
x-files [Thermal Power plant KOSTOLAC, SERBIA] Sucessfully certified to ISO 50001 Sustainability, Green Initiatives and Ecology 1
x-files [Thermal powerplant] Why "Generation of electricity" is a special process? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
x-files Thermal Powerplant - 7.5.3 Identification and Traceability ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
S Thermal Sensitivity Testing - Heat Lamp - ILY - Increased blood circulation IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
x-files [Exclusions] 7.3 Design and development vs. Thermal Powerplant ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
x-files Global Timeline Plan of IMS/QMS Activities for a Thermal Power Plant ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
Marc Acronym CTE - Coefficient of Thermal Expansion Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 2
O AECQ 200 Revision D vs. Revision C - Thermal Shock & Thermal Cycling Other ISO and International Standards and European Regulations 2
U Is there such a thing as 1-part thermal cure epoxy? Manufacturing and Related Processes 11
M Transport Vehicle Thermal Regulation - How would you interpret this requirement? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
D Transformers and Thermal Cutouts IEC 60601 - Medical Electrical Equipment Safety Standards Series 2

Similar threads

Top Bottom