IQC (Incoming Quality Control) requirement on Electric Power Adaptor for US and CE

S

saisai

#1
hi, All,


do you have any IQC procedure/requirement to inspect adaptor for US or CE market?

thanks
Saisai
 
Elsmar Forum Sponsor

Marc

Fully vaccinated are you?
Staff member
Admin
#2
Re: IQC requirement on adaptor for US or CE

IQC = Incoming Quality Control?
IQC = Internal Quality Control?

What type of adapter? Electric power?
 

somashekar

Staff member
Admin
#3
Re: IQC requirement on adaptor for US or CE

hi, All,


do you have any IQC procedure/requirement to inspect adaptor for US or CE market?

thanks
Saisai
Yes, The type, brand / make, and the model as specified in your technical file OR as specified in your safety report that has been assessed and approved by the test house. Ensure that the adaptor comes with the necessary safety marks that have been listed within the above said reports. Additionally a test report / test certificate for the adaptor from the manufacturer will add to your IQC criteria.
 
Thread starter Similar threads Forum Replies Date
E Buying Radiopaque Dyes for IQC Testing Purposes Manufacturing and Related Processes 2
L Implementation of Certificate of Acceptance/Analysis in place of IQC Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
J Is it a must for IQC department to issue VCAR when a lot rejected? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
J Incoming Inspection Records using Excel File ISO 13485:2016 - Medical Device Quality Management Systems 2
J Requirements as a Distributor for Incoming Inspection of Purchased Finished Medical Device Medical Device Related Regulations 0
J Action Not defined in procedure - NC - Incoming inspection AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
M Material incoming to the production process reflected in PFMEA FMEA and Control Plans 9
silentmonkey How to decide what characteristics need to be verified during incoming inspection? ISO 13485:2016 - Medical Device Quality Management Systems 5
I Incoming insepction needs repair - sell as "new", "brand new", or something else Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
D Incoming (Receiving) Inspection - General form for incoming part inspection Document Control Systems, Procedures, Forms and Templates 17
T Primary & Secondary Inspection Definitions - Incoming, In-process & Final Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
Ajit Basrur Incoming Inspection for Instructions for Use (IFU) 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
R Is pre-conditioning supplier component before incoming inspection tests allowed? Quality Manager and Management Related Issues 16
T How to identify requirements for 'Incoming inspection' Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
J Incoming Inspection Plans under Design Control (part of DMR)? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
C ISO13485 Incoming Receiving Parts Verification ISO 13485:2016 - Medical Device Quality Management Systems 13
T Can incoming and outgoing areas be allocated inside the store? Other ISO and International Standards and European Regulations 1
R Policy Statement for FDA CFR 820 Acceptance Activities of Incoming Products. Other US Medical Device Regulations 1
L How to define R & D Receiving (Incoming) Inspection Plan Design and Development of Products and Processes 18
M Incoming, In-Process, Final and Outgoing Quality Inspection Procedure examples Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
M Partial Incoming (Receiving) Inspection Delivery Inspection. Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
C Incoming Inspection Database Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
A Incoming Material Quality Assurance Cell Document Control Systems, Procedures, Forms and Templates 4
R PFMEA (process FMEA) for Incoming Material stage FMEA and Control Plans 7
C Incoming Inspection Acceptance Sampling by Variables and Minitab Quality Tools, Improvement and Analysis 1
S Calibration/Certification requirements for an Incoming Inspection Fixture Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
T Incorporating incoming procedures (ISO9001:2008) with ISO 13485:2003 Supplier Quality Assurance and other Supplier Issues 3
M Incoming (Receiving) Inspection Procedure - Please Review Supplier Quality Assurance and other Supplier Issues 7
Q Current Process Controls (Prevention) and Incoming Raw Material Inspections FMEA and Control Plans 8
K LEAN in the Incoming/Receiving Department Lean in Manufacturing and Service Industries 9
M Incoming Source of Variation & Source of Variation in Process Flow Chart IATF 16949 - Automotive Quality Systems Standard 3
F Supplier Measurements vs. Incoming (Receiving) Measurements Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 16
K Incoming (Receiving) Inspection for Commodity Items used in Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 11
Ron Rompen Recommended Rockwell 30T Scale Hardness Tester to verify Incoming Product General Measurement Device and Calibration Topics 1
C Medical Device On The Floor Receiving (Incoming) Quality Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
B Sample Size for Incoming (Receiving) Materials and Parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
T Incoming (Receiving) Quality Control Laboratory for Raw Paper Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
S Inspection & Verificaton of Incoming Material - How best one can accomplish ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 20
P Incoming (Receiving) Components Inspections Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
R Incoming Inspection, Handling and Storage Procedure for Lead Acid Batteries Other Medical Device and Orthopedic Related Topics 1
T Incoming Testing for Non-Woven Materials used for Pharma Products and Cosmetics Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
T Is Material Certification Required for Incoming Material (Receiving) Inspection? Supplier Quality Assurance and other Supplier Issues 10
J Incoming Inspection AQL Sampling of Bulk Textiles AQL - Acceptable Quality Level 3
Q Control plans for Incoming, Warehouse and Shipping process FMEA and Control Plans 5
N How to apply Incoming (Receiving) Inspection to Customer Supplied Material? IATF 16949 - Automotive Quality Systems Standard 18
C What to look for when inspecting incoming packaging goods such as empty retail boxes Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
L Critical Characteristics in Incoming (Receiving) Inspection - Inspection Levels Inspection, Prints (Drawings), Testing, Sampling and Related Topics 18
P Implement FAI process in my Incoming (Receiving) Inspection Procedure ISO 13485:2016 - Medical Device Quality Management Systems 6
D Samples from Lots of Incoming Raw Materials - Sampling Protocol Help Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
S Incoming Receiving Inspection from Sister Plant IATF 16949 - Automotive Quality Systems Standard 7

Similar threads

Top Bottom