Is anyone using Process Modeling Software from ProcessModel, Inc.?

T

tcbracing

#1
Anybody using the Process Modeling software from these guys?

http://www.processmodel.com/

It seems like it might be a good way to document processes for TS2 and find potential problems.

Any feedback is appreciated.

Thanks,
Tom
 
Elsmar Forum Sponsor

howste

Thaumaturge
Super Moderator
#2
I've got a demo CD sitting on my desk right now waiting for me to take a look at it again. I used their software about 5 years ago for manufacturing process simulation. It's very powerful, but at the time it had a pretty steep learning curve. I'm sure it's much better now.
 
T

tcbracing

#3
I just ordered the demo disk myself.

Will post comments and observations after review.
 
P

Paul Vragel

#4
We've used Process 2003 (and its predecessors) from iGrafx/Corel for a number of years, and found it easy to use - easy enough that our clients can pick it up without extensive training. (We don't sell the software, just use it). You can link all the maps, link in documentation, and also compile the whole system to the web, giving you a useful access/distribution capabilitiy. The software also has simulation capabilities.
 
Thread starter Similar threads Forum Replies Date
V Process Mapping - Is there anyone using process maps to meet 4.1 requirements? Process Maps, Process Mapping and Turtle Diagrams 3
Q Is anyone using MasterControl Spark? I have a question ISO 13485:2016 - Medical Device Quality Management Systems 8
D Anyone using a cloud based QMS software? Document Control Systems, Procedures, Forms and Templates 12
W Anyone using Keyence Image Measurement System Calibration and Metrology Software and Hardware 2
J Is anyone here using Metcal / Met TEAM (8.1) Calibration and Metrology Software and Hardware 1
J Anyone using SiliconExpert Technologies Software for RoHS/REACH/CM RoHS, REACH, ELV, IMDS and Restricted Substances 1
J Implementing "Gage Control Software" Is anyone using this program? Calibration and Metrology Software and Hardware 12
ScottK Is anyone using iCloud? After Work and Weekend Discussion Topics 17
E Is anyone here using APQP (AIAG manual) in Medical Devices? ISO 13485:2016 - Medical Device Quality Management Systems 4
D Using Regrind - Anyone ever used a deduster to improve quality of material? Manufacturing and Related Processes 3
R Is anyone using GreenCut Cutting Fluid Miscellaneous Environmental Standards and EMS Related Discussions 2
N Does anyone have any experience or feedback using mind mapping software? Quality Tools, Improvement and Analysis 5
Q AIAG CQI-14 - Consumer-Centric Warranty Management Guidelines - Is Anyone Using This? Customer Complaints 9
S Anyone familiar with using an Authorized Representative in the UAE? Other Medical Device Regulations World-Wide 2
J Is anyone using "Costaware" Cost Reduction Software? Quality Assurance and Compliance Software Tools and Solutions 0
S Microsoft OneNote - Is anyone using Microsoft OneNote Quality Assurance and Compliance Software Tools and Solutions 13
D Does anyone have experience using open source software for PDM? ISO 13485:2016 - Medical Device Quality Management Systems 1
Jim Wynne Anyone still using floppies? After Work and Weekend Discussion Topics 37
M Anyone Using Parsec Software? Coffee Break and Water Cooler Discussions 3
Y Biocompatibility of Lexan 244 - Is anyone using Lexan 244? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
Q Is anyone using FormDocs (Electronic Form-Filling Software)? Document Control Systems, Procedures, Forms and Templates 12
Marc Greylisting - Is anyone using 'Greylisting'? After Work and Weekend Discussion Topics 5
F Porosity Testing anyone? Ceramics using Liquid Ceramic Slurry Reliability Analysis - Predictions, Testing and Standards 2
L Is anyone using Gagemaker? Calibration and Metrology Software and Hardware 2
Ajit Basrur Anyone using Net Promoter Scorecard (NPS) to Measure Customer Loyalty? Misc. Quality Assurance and Business Systems Related Topics 4
Q Document Control Software Suggestions - Anyone using MIPSIS? Document Control Systems, Procedures, Forms and Templates 7
K Anyone using MQ1 by CEBOS? Quality Assurance and Compliance Software Tools and Solutions 13
A Anyone still using the 862 Datamytes? Statistical Analysis Tools, Techniques and SPC 3
A Does anyone using or know about the software Visio or MS Visio? Quality Assurance and Compliance Software Tools and Solutions 8
Jim Wynne Anyone using Office 2007? After Work and Weekend Discussion Topics 26
Marc Is anyone using Gmail (Google Mail) to filter spam? After Work and Weekend Discussion Topics 21
C Anyone using the new ANSI/NCSL Z540.3-2006? General Measurement Device and Calibration Topics 28
Crusader Anyone using FastLynx software? After Work and Weekend Discussion Topics 5
G AA 1000 - AccountAbility Standard - Is anyone using AA 1000? Other ISO and International Standards and European Regulations 2
Steve McQuality Visual Enterprise/Crystal Reports - Anyone Using This System? Document Control Systems, Procedures, Forms and Templates 12
D Is anyone using a commercial Configuration Management Software for AS9100? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
Q QI Analyst - Is anyone is still using version 2.0.1? Statistical Analysis Tools, Techniques and SPC 0
D Zero Acceptance Sampling - Is anyone is actually using this? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
J Anyone out there using Self Evaluations? Career and Occupation Discussions 5
Q Do You Know Anyone Using ISO 10002? ISO 10001 and ISO 10003 are under development Other ISO and International Standards and European Regulations 2
Claes Gefvenberg Anyone using Thunderbird? After Work and Weekend Discussion Topics 16
R Rolled Throughput Yield - Is anyone using this metric, and if so, how Lean in Manufacturing and Service Industries 6
R Using Excel .xls spreadsheet to replace paper logsheets - Has anyone had success? Excel .xls Spreadsheet Templates and Tools 24
D Oracle PLM - Anyone out there using Oracle PLM or know anything about it? Quality Assurance and Compliance Software Tools and Solutions 0
L Notified Body - Does anyone have experience using TUV Essex? Registrars and Notified Bodies 2
G JobBoss: Anyone using this Job Shop Management Software?? Quality Assurance and Compliance Software Tools and Solutions 4
D Is anyone currently using a portable CMMs (e.g. Faro, Romer, etc.)? General Measurement Device and Calibration Topics 3
P Is anyone out there considering using a Third-Party for their FDA Audit? US Food and Drug Administration (FDA) 7
G Self Directed Work Teams - Anyone using SDWT in their company? Manufacturing and Related Processes 19
WALLACE Is anyone using Adobe photoshop 7? Coffee Break and Water Cooler Discussions 6

Similar threads

Top Bottom