Is clause 7.1 (product realisation) relevant to wholesaler?

E

ermintrude37

#1
Hi all,

I'm new here and have been given the task of getting our company ISO9001 accredited. We are a wholesaler and dont manufacture anything ourselves - we just handle product in and out of the warehouse. Can anyone tell me if clause 7.1 is therefore not applicable to us?

Thanks everyone!
Tracy:mg:
 
Elsmar Forum Sponsor

harry

Super Moderator
#2
............. We are a wholesaler and dont manufacture anything ourselves - we just handle product in and out of the warehouse. ....................
Welcome to the Cove.

You are in the service industry. Just substitute the word product with the word service and you can see the picture a lot clearer.

Just like a product, a service needs to be planned and if the output of this planning for a product is a quality plan, similarly, the out put for a service can be in the form of a service quality plan.


............. Can anyone tell me if clause 7.1 is therefore not applicable to us? ....................
Yes, 7.1 is applicable to you.
 

Big Jim

Trusted Information Resource
#3
Your production (7.5.1) is mostly that of filling an order. Your planning for production (7.1) is mostly planning on how to fill the order, or in other words the creation of a pick ticket and planning related to how to handle orders.
 

Mikishots

Trusted Information Resource
#6
Hi all,

I'm new here and have been given the task of getting our company ISO9001 accredited. We are a wholesaler and dont manufacture anything ourselves - we just handle product in and out of the warehouse. Can anyone tell me if clause 7.1 is therefore not applicable to us?

Thanks everyone!
Tracy:mg:
As mentioned, product and service are one in the same as far as the standard is concerned.

On a side note, registrars will be accredited, not your organization. Certified and registered are equivalent in definition, but you should not say that your organization is accredited. Your company will have its QMS certified/registered to the ISO 9001:2008 standard.

It's a small point but the terminology is important. ;)
 
Thread starter Similar threads Forum Replies Date
C API Q1 Clause 7.1.1 Planning of Product Realisation Oil and Gas Industry Standards and Regulations 2
M Compliance with ISO 9001 Clause 7.1 - Planning of Product Realisation ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 19
A ISO 13485 - Clause 8.3.3 appropriate actions in response to nonconforming product ISO 13485:2016 - Medical Device Quality Management Systems 2
Q ISO 9001:2015 Clause 8.3 - Is it possible to exclude one product but include it in other? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
J IATF 16949 Clause 8.7.1.7 Nonconforming Product Disposition - Scrap Rendered Unusable IATF 16949 - Automotive Quality Systems Standard 64
M IATF 16949 Clause 4.4.1.2 - Product Safety - Concept of the Title IATF 16949 - Automotive Quality Systems Standard 4
J IATF 16949 Clause 8.7.1.7 Nonconforming Product Disposition Compliance IATF 16949 - Automotive Quality Systems Standard 38
M Exclusion of IATF 16949 Clause 4.4.1.2 - Product Safety IATF 16949 - Automotive Quality Systems Standard 2
D Product Safety in AS9100D Clause 8.1.3 - Hazards Analysis AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 18
M IATF 16949 Clause 4.4.1.2 - Product Safety IATF 16949 - Automotive Quality Systems Standard 13
M Compliance with IATF 16949 Clause 8.3.4.4 Product Approval Process IATF 16949 - Automotive Quality Systems Standard 2
D AS9100C Clause 8.2.4 Monitoring and Measurement of Product AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 9
W Checklist for AS9100 Clause 7.2.2 Review Of Requirememts Related to Product AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
I Interpreting Product Realization (Clause 7) in ISO 9001:2008 for Service Industry ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
E ISO 9001:2008 Clause 8.2.4 - Monitoring and Measurement of Product ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
Q Interpretation of Clause 7.1 Planning Of Product Realization in AS9100C standard AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 2
M How to Control Nonconforming Product? TS 16949 Clause 8.3 IATF 16949 - Automotive Quality Systems Standard 2
M TS 16949 Clause 8.2.4 Monitoring and Measurement of Product - Customer Scope? IATF 16949 - Automotive Quality Systems Standard 3
S How do you determine a Constituent Part - Clause 7.5.5 Preservation of Product? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
N Boundary of Clause 8.3 - Control of Nonconforming Product ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 14
Z If this is a Nonconforming Product (Service) under clause 8.3? How do we handle it? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
M Practical Guidance on TS 16949 Clause 7.5.3 - Product Status Identification IATF 16949 - Automotive Quality Systems Standard 3
Q AS9100 Clause 8.3 - Control of Nonconforming Product Process for Approving Personnel AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
C ISO 13485 Clause 7.5.1.2.1 Cleanliness of Product and Contamination Control Question ISO 13485:2016 - Medical Device Quality Management Systems 7
J Product Release Authorization - Clause 8.2.4 Requirements Nonconformance and Corrective Action 11
J AS9100 Clause 7.4.3 Verification of Purchased Product - OEM C of C required? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 6
N Clause 7.5.5 Preservation of Product in a Home-Care Company? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
W ISO9001 Clause 7.4.3 - Verification of Purchased Product - Software ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 14
R ISO 9001 Clause 7.5.5 Preservation of Product - Application to Software Products ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
T AS 9100 Rev C Clause 7.4.2 - Supplier Nonconforming Product AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 4
S AS9100 Clause 8.3 - Control of Nonconforming Product Q AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 13
quality1 AS9100 Clause 8.3 Control of Nonconforming Product - Clarification wanted AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 6
A ISO 9001 Clause 7.5.5 Preservation of Product - Apply or exclude? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 23
O Definition of "Product Conformity to Requirements" in ISO 9001 Clause 4.1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
X Cannot Verify until Customer uses Product - Clause 7.5.2 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
H Planning of Product Realization - AS9100 Clause 7.1 - Can we exclude 7.1f? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 4
D Product or Process Data Analysis Over Time - CQI-9 Clause 1.8 Quality Manager and Management Related Issues 1
F Review of Requirements Related to the Product - Clause 7.2.2 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
Q Validation - The process or product? ISO 9001 Clause 7.3.6 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 20
V Product Design Skills - TS 16949 Clause 6.2.2.1 Requirement IATF 16949 - Automotive Quality Systems Standard 2
B What is in a Product Audit? TS 16949 Clause 8.2.2.3 Process Audits and Layered Process Audits 21
Q Product Realization Procedure - How to comply with ISO 9001 Clause 7.1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
B Clause 7.2.1 Determination of requirements related to the product ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
K Verification of Purchased Product - Help Understanding Clause 7.4.3 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
L How to apply the clause "control of non-conforming product" on services company ? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
R Product Design Input as per TS 16949 clause 7.3.2.1 Design and Development of Products and Processes 9
L Product Design and Development - How do I know if Clause 7.3 applies? Design and Development of Products and Processes 4
A Preservation of Product - Service Industry - AS9100 Clause 7.5.5 AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 9
H Product Audit - TS 16949 Clause 8.2.2.3 IATF 16949 - Automotive Quality Systems Standard 18
S TS 16949 Clause 7.4.3.2 - Help with Delivered Product Quality IATF 16949 - Automotive Quality Systems Standard 4
Similar threads


















































Top Bottom