SBS - The best value in QMS software

Is the stampede to ISO 9001:2000 about to start?

What is your current status concerning ISO 9001:2000?

  • We will not transfer

    Votes: 1 6.7%
  • We haven't started

    Votes: 2 13.3%
  • We're working on it

    Votes: 5 33.3%
  • Done.....

    Votes: 4 26.7%
  • NA, but I want to see the poll results

    Votes: 3 20.0%

  • Total voters
    15
#1
Is the stampede about to start?

I have posted this poll once before, earlier this year. I believe it's time for an update: What is your current situation concerning the transfer to ISO 9001:2000? The deadline is looming.

Current situation in Sweden:

Appr.4700 companies certified acc to ISO9001. Certifying bodies claim that appr. 30% of their customers have upgraded so far, and fear that they may not have the resources to take care of the stampede when it begins...

How about you?

We will not transfer
We have not started
We're working on it
Done it...
 
Elsmar Forum Sponsor

Mike S.

Happy to be Alive
Trusted Information Resource
#4
The May Quality Digest says that as of April 22, 2003 only 18% of companies in all of N. America have transitioned. An article in there blames the low transition rate on the poor economy. So, I suppose someone (lots of someones) must believe it will cost more than it is worth, or that other uses for those dollars will give more bang-for-the-buck.
 
C

Craig H.

#5
Hi, all.

We finished in Feb. of this year.

I tend to agree with Mike, but I have not actually heard anyone say that they have made a decision to not make the transfer.

I do think, however, that because of the lack of resources there may be some who just won't get done in time. The next few months might be a very profitable time to be an auditor,

Craig
 
A

Aaron Lupo

#6
Been done for almost 3 years now, well more accurately all the changes have been in draft form for about the past 3 years. We were just waiting for management to decide yeah we better do this. So our registration audit to 9K2K will be in September of this year.
 
L

Laura M

#7
One client - last April - upgraded - 2 surveilance so far.
One client is QS - will prob go to ISO - being tier 3
2 others going for ISO - 2000 obviously - not previously registered.
 

howste

Thaumaturge
Super Moderator
#8
Most of my consulting clients are new registrations, so they will be doing 9001:2000 or TS 16949:2002 and aren't really worried about the 12/15 deadline. People attending auditor and transition training seem to be a mix of new and old. Those with current certifications to the 1994 standard all seem to be planning an upgrade within the next 6~7 months for some reason. :confused: My feeling is that everyone is waiting for the last six months of 2003 and will be a part of the stampede. I plan to be very busy during that time of the year.

BTW an aerospace company I audited last month fired one of their suppliers who dropped their ISO 9001 quality system for financial reasons. They didn't see it as worth the effort. The customer didn't drop them because they lost their certification though -- they dropped them for a decline in product quality and lack of responsiveness. Hmmmmmm....
 
A

Atul Khandekar

#10
From last week's QualityInsider Survey:

Q:As the deadline looms for the ISO 9001:2000 transition, only about 20 percent of ISO 9000:1994-registered companies have completed the transition. The odds seem very good that many companies will lose their registration.

Why do you think the percentage is so small?

- Lack of interest by registered companies 45% (149)
- Poor economy 22.1% (73)
- Other 10.6% (35)
- The new standard is too different. 10% (34)
- Lack of promotion of the transition 8.2% (27)
- Insufficient time to make the transition 2.1% (7)
- Lack of auditors 1.8% (6)
 
Thread starter Similar threads Forum Replies Date
Marc Stampede to ISO9001:2000? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
M Change in Constitution / Ownership of firm -------ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 1
P ISO 9001 certification with zero customers? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
M ISO 14971 Determination of Competent Persons ISO 14971 - Medical Device Risk Management 4
R Clinical accuracy and repeatability of IR(infrared) thermometer, no maximum error criteria is recommended in ISO Other Medical Device Related Standards 10
Q The scope of ISO 21534 Other Medical Device Related Standards 0
A What must be recorded? (ISO 9001:2015, subclause 10.2) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
M ISO 14971:2019: Criteria for overall residual risk ISO 14971 - Medical Device Risk Management 4
B Updated IATF 16949 - Will IATF 16949 get revised when ISO 9001:202X is released? IATF 16949 - Automotive Quality Systems Standard 4
S ISO 9001:2015 vs 21 CFR Part 211 matrix Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 0
N Quality Compliance Officer - ISO 13485, London Job Openings, Consulting and Employment Opportunities 1
T ISO 17025: Lockout/Tagout Requirement ISO 17025 related Discussions 1
N ISO 9001 implementation in a Gold exporting business ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
M Does the ISO 9001:2015 standard require a disaster recovery plan or emergency response plan ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
E ISO 13485 QMS certification as a Supplier ISO 13485:2016 - Medical Device Quality Management Systems 8
A Environmental Compliance obligations and risks (ISO 14001:2015 6.1.3) ISO 14001:2015 Specific Discussions 3
R ISO 17025 vertical audit checklist wanted Document Control Systems, Procedures, Forms and Templates 2
A Tips and Tricks to understand ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
M ISO 9001 Major Nonconformance Internal Audit Schedule/COVID-19 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
T ISO 13485:2016 Clauses related to process matrix ISO 13485:2016 - Medical Device Quality Management Systems 3
K ISO 50001 Consultant wanted Paid Consulting, Training and Services 0
K Comparison wanted: ISO 15378:2018 vs. PS9000:2016 Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 0
B ISO 9001 - "Remote Audit Fee" Registrars and Notified Bodies 13
R Risk control measures as per ISO 14971 ISO 14971 - Medical Device Risk Management 6
John C. Abnet ISO 45001:2018 (5.4 - Consultation and participation of workers) Occupational Health & Safety Management Standards 10
Sidney Vianna What ISO Standard (under the TC 176) supports the UN Sustainable Development Goal #10? ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 11
S ISO 15223-1:2020 Symbols Other Medical Device Related Standards 1
John C. Abnet ISO 9001 4.4.1 "...shall determine the processes needed..." ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 72
R ISO 10993-18 Medical Device and FDA Regulations and Standards News 1
J Can signed agreements over-ride review of every "contract" under ISO 13485:2016? ISO 13485:2016 - Medical Device Quality Management Systems 2
R Applicable ISO standards - packaging and others Medical Device and FDA Regulations and Standards News 4
J Implementing an ISO 13485 QMS Software ISO 13485:2016 - Medical Device Quality Management Systems 6
Q EN ISO 13485:2016/AC:2018 - AC:2018 being stated in the applicable harmonized standard listing Other ISO and International Standards and European Regulations 1
M ISO 10993-17 - Ancillary Medicinal substance leachables Medical Device and FDA Regulations and Standards News 1
M Medical Devices - Ancillary - ISO 10993-17 Medical Device and FDA Regulations and Standards News 6
J Leveraging another company's ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 5
J New Job Position - Achieving ISO 13485 Certification ISO 13485:2016 - Medical Device Quality Management Systems 4
S ISO 9001 Clause 8.2.3 - Review of the requirements for products and services in a Cafe ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
A ISO 17025 - Methods validation and clients ISO 17025 related Discussions 3
A Scope of ISO 13485 certificate ISO 13485:2016 - Medical Device Quality Management Systems 1
A ASL requirement when the supplier is certified for ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 6
D ISO 9001 certificate issued by QMS International for 10 years - legit? Registrars and Notified Bodies 17
Z Does anyone have experience with EN ISO 17664 ? IEC 62366 - Medical Device Usability Engineering 9
K Medical Device Repairs and ISO Scope ISO 13485:2016 - Medical Device Quality Management Systems 3
K Software Updates in the Field and ISO scope ISO 13485:2016 - Medical Device Quality Management Systems 2
M ISO 13485-2016 online certification ISO 13485:2016 - Medical Device Quality Management Systems 3
Z Auditor Findings ISO 14001:2015 vs. 45001:2015 ISO 14001:2015 Specific Discussions 5
S Thoughts on managing ISO 9001, 13485, IATF 16949 and 17025 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 33
S Supplier Management ISO 13485: 2016- Which supplier needs to fill in a self assessment form? ISO 13485:2016 - Medical Device Quality Management Systems 6
C ISO/IEC 17021-1 clause 7.1.2 - Determination of competence criteria Document Control Systems, Procedures, Forms and Templates 2

Similar threads

Top Bottom