Is there a Specification for safety wire installation - Aerospace, SAE or otherwise

RCW

Quite Involved in Discussions
#1
Does anybody know if there is an aerospace spec, SAE or otherwise, for the installation of safety wire? We tie down a connector jam nut for a device we manufacture but I cannot justify the method we use.
 
Elsmar Forum Sponsor
A

andygr

#2
Re: Spec for safety wire installation

Give NASM 33540 a try.
Many folks write their own internal doc.It can allways get intresting when there is a differance of opinion on what is the "right" criteria to use. The approved design data allways wins so for us our TSO data is the law.
:2cents:
 

Randy

Super Moderator
#3
Re: Is there a Specification for safety wire installation - Aerospace, SAE or otherwi

Take a look at the attached. I'm on the road and don't have access to my mechanics manuals, but I'm an A&P and lockwire can look like what I have here.
 

Attachments

C

cmark74

#4
Re: Spec for safety wire installation

Give NASM 33540 a try.
Many folks write their own internal doc.It can allways get intresting when there is a differance of opinion on what is the "right" criteria to use. The approved design data allways wins so for us our TSO data is the law.
:2cents:
Does anyone have the NASM33540 standard in pdf format? I would appreciate if you can attach it here or contact me.
Thank you.
 

Stijloor

Staff member
Super Moderator
#5
Re: Spec for safety wire installation

Does anyone have the NASM33540 standard in pdf format? I would appreciate if you can attach it here or contact me.
Thank you.

The Standard can be purchased here. Copyrighted documents can not be requested on The Cove Forums.

Hope this helps.

Stijloor, Forum Moderator.
 

AEOS_QA

Involved In Discussions
#7
Re: Is there a Specification for safety wire installation - Aerospace, SAE or otherwi

Try to google FAA advisory circular AC 43.13-1B Chapter 7. The complete hard-copy volume "Acceptable methods, techniques, and practices — aircraft inspection and repair". Individual chapters are usually available for download.
 
C

cmark74

#8
Re: Is there a Specification for safety wire installation - Aerospace, SAE or otherwi

Try to google FAA advisory circular AC 43.13-1B Chapter 7. The complete hard-copy volume "Acceptable methods, techniques, and practices — aircraft inspection and repair". Individual chapters are usually available for download.
Thank you Mr AEOS_QA for the recommendation of the FAA advisory circular AC 43.13-1B Chapter 7. Very useful indeed.
 
Thread starter Similar threads Forum Replies Date
D DQ documents of new equipment - Function specification Qualification and Validation (including 21 CFR Part 11) 0
DuncanGibbons Manufacturing Plan vs Material Specification vs Control Plan Manufacturing and Related Processes 4
T Root Cause Failure Analysis - Not following Customer packaging Specification Problem Solving, Root Cause Fault and Failure Analysis 5
Q User Requirement Specification for HR (Human Resource Management System) Manufacturing and Related Processes 1
S Managing specification changes on standard parts purchased through trading companies Document Control Systems, Procedures, Forms and Templates 2
D Performance specification as a Risk Control Measure, EN 14971 ISO 14971 - Medical Device Risk Management 7
D Subcontracting specification developer duties US Food and Drug Administration (FDA) 5
shimonv IEC 60601-1 Essential Performance - Is the signal accuracy specification an essential requirement? IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
S How to find technical specification for facilities maintainance ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
R Process Specification - What is the name of this PPAP form? APQP and PPAP 15
S When does a Distributor become a Specification Developer? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
M Procedure or Specification For Extending Gages Calibration Calibration Frequency (Interval) 2
Lisa Christo Specification developer Other Medical Device Related Standards 0
B IATF 16949:2016 – Technical Specification (eBook edition) IATF 16949 - Automotive Quality Systems Standard 1
R Contract Manufacturer/OEM Supplier - We are a specification developer for a kitted product 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
E Compliance to standards (ISO 80369) but the ID is out of specification Other ISO and International Standards and European Regulations 0
C ICP versus AA: How to determine appropriate specification for assay method verification Qualification and Validation (including 21 CFR Part 11) 1
M Specifications Aerospace - Who is responsible for providing the correct specification(s) AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 14
I EO sterilization out of specification and correction Other Medical Device Regulations World-Wide 1
C Specification Developer or Consultant? Definitions 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
S Medical Device Manufacturer vs. Specification Developer Other US Medical Device Regulations 1
R Specification on flare testing extruded aluminum - Where to find Design and Development of Products and Processes 1
supadrai Establishment registered as specification developer and foreign exporter only 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
M McDonnell Douglas Specification Control Drawings Various Other Specifications, Standards, and related Requirements 4
J Is there a specification that provides directions on Drawing Revision Changes Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
S Dates on Labels acceptable to the USA - GS1 General Specification 3.4.4 Other US Medical Device Regulations 3
S GR&R using 10 Parts with different Specification Limits Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
shimonv Soldering Station Accuracy out of specification 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
P Accounting for Variability on High Side of Specification Reliability Analysis - Predictions, Testing and Standards 1
P Specification Subscription Services - Eg: Things like MSDS AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
J Deformation specification not defined in print Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
N Understanding the absolute uncertainty specification for a Fluke 5500A Measurement Uncertainty (MU) 3
R Looking for calibration specification for Fluke 7250 pressure controller General Measurement Device and Calibration Topics 5
A Uncertainty Measurement - What this accuracy specification "1% + 10^5": means? General Measurement Device and Calibration Topics 2
R ISO 13485 for Specification Developers ISO 13485:2016 - Medical Device Quality Management Systems 4
P Specification and Tolerance in Stability Control Chart Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
T Customer requires Internal Specification to be met on PPAP APQP and PPAP 7
M Molded Component Color Tolerance Specification Manufacturing and Related Processes 6
Z Stamping Press Die Specification Manufacturing and Related Processes 2
L AS9100 - 7.4.2d Purchasing - Specification revision for raw material needed? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
A Stuck at 'Analyse' stage of DMAIC Improvement Cycle on Cosmetic Specification Manufacturing and Related Processes 10
D Performing a Gage R and R with No Specification Range Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
T SOP for How to Write a Specification for Raw Materials and Finished Good ISO 13485:2016 - Medical Device Quality Management Systems 3
S Specification Verification Responsibility AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
A Cosmetic Visual Inspection Specification Advantages Manufacturing and Related Processes 7
B Searching for Naval Air Engineering Center test specification NAEC TP 83-1 Misc. Quality Assurance and Business Systems Related Topics 1
V Setting Specification Limits for UOD (Uniformity) for Live Bacteria or Spores Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 4
J Why doesn't ANOVA Method take the specification into account when determining GR&R % Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
L Implementing ISO 27001 A12.1.1 Security Requirements Analysis and Specification IEC 27001 - Information Security Management Systems (ISMS) 2
M What is the difference between an Outlier versus Out of Specification ? Statistical Analysis Tools, Techniques and SPC 17
Similar threads


















































Top Bottom