Is there any relationship between Cpk & Right First Time? First Pass Yield (FPY)?

L

lee01

#1
#1
I have been given the task by the University I attend to determine the relationship between Cpk and 'Right First Time', but I have come up with a blank, If anyone could e-mail me any suggestions then I would be very thankfull.
 
GAGEpack - Gage & Calibration Management
Elsmar Forum Sponsor
A

Al Dyer

#2
#2
I can't see a relationship.

"CpK" is quantified based upon data and requirements.

"Do it right the first time" is a "qualified" thought process based on subjective actions.

MHO

ASD...
 
A

Al Dyer

#4
#4
Originally posted by MSAFAI:
Lee,

Is "Right First Time" the same as "First Pass Yield" (FPY)?
Click to expand...

Right the first time is the process of preventive action to ensure that potential failures are minimized, could you expand on FPY?

It may be a language thing but I read FTY as the first outcome of the process that may be controlled by GP-12 (early production containment).

ASD...
 
M

MSAFAI

#5
#5
Originally posted by Al Dyer:

Right the first time is the process of preventive action to ensure that potential failures are minimized, could you expand on FPY?

It may be a language thing but I read FTY as the first outcome of the process that may be controlled by GP-12 (early production containment).

ASD...
Click to expand...

Dear Al,

If I'm not mistaken, FPY of a process is the ratio of the parts produced without defect "first time" to the total no of parts produced. In other words:

FPY = (parts produced without defects first time / total number of parts produced)*100

"Fisrt time" refers to products without a need for repair, rework etc.

If FPY is what our friend lee01 means, then it is not difficult to relate it to Cpk.

MSAFAI
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
kedarg6500 Relationship between Cp and Cpk Capability, Accuracy and Stability - Processes, Machines, etc. 4
kedarg6500 Relationship between Cp & Cpk Statistical Analysis Tools, Techniques and SPC 5
T Relationship between ISO 9001 and ISO – IEC BS EN 870079- 34 2020 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
S Relationship between IEC 62304 problem resolution and ISO 13485 IEC 62304 - Medical Device Software Life Cycle Processes 8
C Understanding the relationship between 62304 and the MDD ER IEC 62304 - Medical Device Software Life Cycle Processes 7
D Relationship between Diameter and Flow Rate & the Length Statistical Analysis Tools, Techniques and SPC 3
T Relationship between ISO9001 and Lean Lean in Manufacturing and Service Industries 15
P The relationship between SPC and a Quality Management System Statistical Analysis Tools, Techniques and SPC 4
T Relationship between TS16949 and 5 Core Tools & relationship between 5 Core Tools IATF 16949 - Automotive Quality Systems Standard 5
N What is the relationship between a DFMEA and PFMEA? FMEA and Control Plans 1
Q What is the relationship between Standard Deviation and 6 Sigma? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
J Relationship between Quality, Reliability, Price and Delivery Misc. Quality Assurance and Business Systems Related Topics 7
D AIAG FMEA 4? Ed. Explanation: Relationship between PFMEA and Special Characteristics FMEA and Control Plans 8
S Relationship between Normal Distribution and AQL AQL - Acceptable Quality Level 13
D Relationship between IEC 60601-1 3rd Ed and IEC 60601-2-10 IEC 60601 - Medical Electrical Equipment Safety Standards Series 8
S The relationship between IEC 60601-2-18 and IEC 60601-2-37 - Ultrasound Project IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
P Relationship between Crimping ID & Crimping Depth - Minitab usage Statistical Analysis Tools, Techniques and SPC 3
L Arima Output - Relationship between my raw data and the residuals generated Using Minitab Software 1
C The relationship between OEM and the subcontracted manufacturer 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
Ajit Basrur Relationship between Blend Uniformity and Content Uniformity Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 2
D Relationship between ISO 9001:2000 and EFQM ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
L What's the relationship between LVD (low voltage directive) and MDD EU Medical Device Regulations 3
D The relationship between the FMEA and Control Plan FMEA and Control Plans 4
K Relationship between "Corrections/Removals" procedure and "Recall" procedure US Food and Drug Administration (FDA) 11
M Relationship between APQP and CM (Configuration Management) APQP and PPAP 11
S Relationship and Differences between ISO 16949 and ISO 15504 (SPICE) IATF 16949 - Automotive Quality Systems Standard 3
M Relationship between quality assurance costs and failure costs Quality Tools, Improvement and Analysis 4
L Relationship between Calibration and a Gage R&R study? General Measurement Device and Calibration Topics 9
V Relationship between Severity and Class FMEA and Control Plans 3
D Relationship between ANOVA and measurement accuracy - Mechanical strenth of a closure Statistical Analysis Tools, Techniques and SPC 13
A ISO TS 16949 - Relationship between requirements and processes IATF 16949 - Automotive Quality Systems Standard 0
J FMEA - What is the relationship between Detection and Prevention? QP Newbie question. FMEA and Control Plans 12
J Relationship Between SAP and ISO9001:2000 Quality Assurance and Compliance Software Tools and Solutions 1
P The relationship between ISO 17025 vs. ANSI Z540-1 ISO 17025 related Discussions 2
N Making improvements in supplier relationship last? Supplier Quality Assurance and other Supplier Issues 6
W 17025 and NIST handbook relationship (need advice) ISO 17025 related Discussions 8
L 'Distributor' definition & MDR/MSR relationship EU Medical Device Regulations 3
S APQP Relationship Diagram APQP and PPAP 2
J CEN/TR 17223:2018 Guidance on the relationship between13485 and MDR.. worth the money?? ISO 13485:2016 - Medical Device Quality Management Systems 3
K Does OEM/OBL-Relationship need to involve an EU Authorized Representative? EU Medical Device Regulations 11
MDD_QNA What is the relationship with the CSA group? Canada Medical Device Regulations 10
T ITAR/EAR relationship and Flow Down to Suppliers AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
C DFMEA vs. PFMEA Relationship: The cause in DFMEA becomes Failure in the PFMEA FMEA and Control Plans 2
J Responsibilities, Authorities and Relationships - What does Relationship mean? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
5 ISO 13485 relationship to 21 CFR 820 ISO 13485:2016 - Medical Device Quality Management Systems 17
alonFAI Definition Failure Review Board and FRACAS - Relationship and differences Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 2
T Capability Level Relationship with ISO/IEC 20000 Achievement IT (Information Technology) Service Management 2
N Agile 9.3.1 Relationship Searches - Meaning of Message Manufacturing and Related Processes 1
C CRMs (Customer Relationship Management) to help achieve ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
C ISO9001 and ISO 13485 Relationship? Can we do both effectively? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4

Similar threads

Top Bottom