ISO 13485:1996 - EN 46001 - Medical devices - Particular requirements - ISO 9001

Marc

Hunkered Down for the Duration
Staff member
Admin
#1
Is anyone familiar with this?

ISO 13485:1996
Quality systems -- Medical devices -- Particular requirements for the application of ISO 9001

Edition: 1 (Monolingual)
Number of pages: 10
Technical committee / subcommittee: TC 210
ICS: 03.120.10, 11.040.01
Stage: 60.60
Stage date: 1996-12-26
 
Elsmar Forum Sponsor
C

Christian Lupo

#2
This document is ISO-900X series with a few additions particular to the medical device industry. The major additions are in section 4.9, and address housekeeping, cleanliness, and PM.
 
W

Wallybaloo

#3
Christian's got it. Also keep in mind that how much of it applies to your situation depends on the classification of the devices you make. Some of it only applies if your product is active (powered) and/or implantable. The definitions at the front help a lot.

ISO 13485 is based on, and very similar to, EN 46001, which seems to be slowly fading.
 

Marc

Hunkered Down for the Duration
Staff member
Admin
#4
Does anyone know if this is the 'Latest & Greatest' with respect to ISO 13485?
 

Wes Bucey

Quite Involved in Discussions
#5
Marc said:
Does anyone know if this is the 'Latest & Greatest' with respect to ISO 13485?
It appears there is an update in 2003. This is the catalog from ISO quoting prices in Swiss Francs for 13485 and its companion, 14969:1999.
Found at:
http://www.iso.org/iso/en/CombinedQueryResult.CombinedQueryResult?queryString=13485
ISO 13485:2003
Medical devices -- Quality management systems -- Requirements for regulatory purposes
Edition: 2 (Monolingual)
Number of pages: 57
Technical committee / subcommittee: TC 210
ICS: 11.040.01; 03.120.10
Stage: 60.60
Stage date: 2003-07-03

Add to shopping basket
ISO 13485:2003 PDF version (en) CHF 150,00 587 KB
ISO 13485:2003 PDF version (fr) CHF 150,00 810 KB
ISO 13485:2003 paper version (en) CHF 150,00
ISO 13485:2003 paper version (fr) CHF 150,00
Abstract
ISO 13485:2003 specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer requirements and regulatory requirements applicable to medical devices and related services.
The primary objective of ISO 13485:2003 is to facilitate harmonized medical device regulatory requirements for quality management systems. As a result, it includes some particular requirements for medical devices and excludes some of the requirements of ISO 9001 that are not appropriate as regulatory requirements. Because of these exclusions, organizations whose quality management systems conform to this International Standard cannot claim conformity to ISO 9001 unless their quality management systems conform to all the requirements of ISO 9001.
All requirements of ISO 13485:2003 are specific to organizations providing medical devices, regardless of the type or size of the organization.
If regulatory requirements permit exclusions of design and development controls, this can be used as a justification for their exclusion from the quality management system. These regulations can provide alternative arrangements that are to be addressed in the quality management system. It is the responsibility of the organization to ensure that claims of conformity with ISO 13485:2003 reflect exclusion of design and development controls.
If any requirement(s) in Clause 7 of ISO 13485:2003 is(are) not applicable due to the nature of the medical device(s) for which the quality management system is applied, the organization does not need to include such a requirement(s) in its quality management system.
The processes required by ISO 13485:2003, which are applicable to the medical device(s), but which are not performed by the organization, are the responsibility of the organization and are accounted for in the organization's quality management system.
@@@@@@@@@@@@@@@@@@@@@@@@@@@
ISO 14969:1999
Quality systems -- Medical devices -- Guidance on the application of ISO 13485 and ISO 13488
(available in English only)

Edition: 1 (Monolingual)
Number of pages: 30
Technical committee / subcommittee: TC 210
ICS: 03.120.10; 11.040.01
Stage: 90.92
Stage date: 2000-01-19

Add to shopping basket
ISO 14969:1999 PDF version (en) CHF 116,00 115 KB
ISO 14969:1999 paper version (en) CHF 116,00
Abstract
No abstract available
 

DannyK

Trusted Information Resource
#6
Iso 13485

Marc,

ISO 13485:2003 was released last summer and it is the latest and greatest.

For Health Canada, companies have till March 15, 2006 to switch over from ISO 13485 or 13488,1996 version.

The new standard is based on the ISO 9001:2000 structure.

Danny
 
V

Vincnet

#7
I think I'v' red somewhere they are in the process of rewriting ISO 14969:1999
but I couldn't find any infos on the ISO site.
 
A

Aaron Lupo

#8
EN 46001/2 is now obsolete (as of 03/31/04) it was replaced by ISO 13485:2003. In the Last I knew the Notified Bodies/Registrars are not yet issuing accredited Certificates as there is no accreditation scheme available yet. (don't quote me on this as it may have changed). ISO/TR 14969 Guidance on the application of ISO 13485:2003 as of 02/13/04 was approved as a DIS.

If you order a copy of ISO 13485:2003 it does include a very informative break down of teh differences between ISO 9001:2000 and ISO 13485:2003.
 

Dave-h

Involved In Discussions
#9
With regard to accreditation. There are now several bodies that can give accreditation to the new version of the standard. Certainly SGS can, and I believe BSI can also.


Dave
 
Thread starter Similar threads Forum Replies Date
S What are the major differences between ISO 13485:1996 and ISO 13485:2003? ISO 13485:2016 - Medical Device Quality Management Systems 8
C ISO 13485 Gap Analysis Checklist - Updating ISO 13485 from the 1996 standard to 2003 ISO 13485:2016 - Medical Device Quality Management Systems 2
M Integrating ISO 13485:1996 with ISO 9001:1994 ISO 13485:2016 - Medical Device Quality Management Systems 6
D Rules for Paper Forms outside of an eQMS - 3 Questions (ISO 13485) Document Control Systems, Procedures, Forms and Templates 4
S Qualification question - ISO 13485 Reliability Analysis - Predictions, Testing and Standards 0
K ISO 13485 clause 8.5.2 'Any necessary CA shall be taken without undue delay' ISO 13485:2016 - Medical Device Quality Management Systems 8
J How much to charge for helping a startup company with initial ISO 13485 certification? Consultants and Consulting 3
J ISO 13485 System 'soft start' - How to best reflect this in initial audits, management review minutes and other records? ISO 13485:2016 - Medical Device Quality Management Systems 3
D ISO 13485 - 7.3.6 Design and development verification - Do most folks create a separate SOP? ISO 13485:2016 - Medical Device Quality Management Systems 4
C ISO 13485 :2016 - CAPA - Does every CAPA need to be checked by regulations? ISO 13485:2016 - Medical Device Quality Management Systems 9
D ISO 13485 8.2.1 and 8.2.2 - Customer Feedback and Customer Complaints ISO 13485:2016 - Medical Device Quality Management Systems 5
Sravan Manchikanti How to interpret '8.3 Control of nonconforming product' for SaMD device while implementing ISO 13485 & MDSAP ISO 13485:2016 - Medical Device Quality Management Systems 4
M Getting started in ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 21
P ISO 13485:2016 MDSAP Certification Fee Survey ISO 13485:2016 - Medical Device Quality Management Systems 6
C SOP Template needed for ISO 13485 6.3 Infrastructure ISO 13485:2016 - Medical Device Quality Management Systems 9
T ISO 13485 8.3 - Non-Conforming Materials - on-line rework or part of process? ISO 13485:2016 - Medical Device Quality Management Systems 11
B Do IFU designs have to be document controlled under ISO 13485? Document Control Systems, Procedures, Forms and Templates 2
H ISO 13485 - Separate Microbiology Audits ISO 13485:2016 - Medical Device Quality Management Systems 3
C Production and Post Production feedback - ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 4
T ISO 13485 - 5.5.1 Responsibility and authority - Small Company Independence ISO 13485:2016 - Medical Device Quality Management Systems 13
D Test summary report example for design validation wanted - ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 1
T ISO 13485 - Process validation at critical suppliers ISO 13485:2016 - Medical Device Quality Management Systems 7
O ISO 13485 vs. GMP - Comparison matrix wanted EU Medical Device Regulations 4
O ISO 13485 - Is management review required before stage 1? ISO 13485:2016 - Medical Device Quality Management Systems 6
O In addition to the standard, what other ISO 13485 sources do people recommend? ISO 13485:2016 - Medical Device Quality Management Systems 5
Watchcat ISO 13485 for IVD (In-vitro Diagnostic Device) Manufacturers? ISO 13485:2016 - Medical Device Quality Management Systems 9
K Contamination Control - Class Is medical devices (Clause 6.4.2 ISO 13485:2016 (E)) ISO 13485:2016 - Medical Device Quality Management Systems 12
H ISO 13485:2016 Gap Analysis by NB ISO 13485:2016 - Medical Device Quality Management Systems 7
F ISO 13485 - EU countries that could request another audit ISO 13485:2016 - Medical Device Quality Management Systems 2
O Adding ISO 13485 to an AS9100 QMS ISO 13485:2016 - Medical Device Quality Management Systems 10
JoCam Increase to bi-annual ISO 13485 audits ISO 13485:2016 - Medical Device Quality Management Systems 2
S ISO 13485 Lead Auditor - Debate between our Quality Team and Regulatory Auditor - Internal Auditor Training ISO 13485:2016 - Medical Device Quality Management Systems 17
A ISO 13485 - Clause 8.3.3 appropriate actions in response to nonconforming product ISO 13485:2016 - Medical Device Quality Management Systems 2
N Address of Legal Manufacturing Site in ISO 13485 certificates? ISO 13485:2016 - Medical Device Quality Management Systems 1
M ISO 13485 for general purpose disinfectants? ISO 13485:2016 - Medical Device Quality Management Systems 9
L How to deal with an ISO 13485 Supplier Audit nonconformance ISO 13485:2016 - Medical Device Quality Management Systems 17
D ISO 13485, FDA 21 CFR 820 and Auditing the Accounting Department ISO 13485:2016 - Medical Device Quality Management Systems 5
M ISO 13485 extended Site (Two companies) ISO 13485:2016 - Medical Device Quality Management Systems 2
S SOP for ISO 13485:2016 Quality related Software validation ISO 13485:2016 - Medical Device Quality Management Systems 9
C ISO 13485 Requirement in Australia/NZ for class 1? ISO 13485:2016 - Medical Device Quality Management Systems 1
E Sharepoint for ISO 13485 QMS for small IVD company ISO 13485:2016 - Medical Device Quality Management Systems 7
K Restricted Scope of ISO 13485 Certification ISO 13485:2016 - Medical Device Quality Management Systems 7
JoCam Difference between Approval and Registration - ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 2
K ISO 13485:2016, Clause 4.2.3 Medical Device File ISO 13485:2016 - Medical Device Quality Management Systems 4
J ISO 14971 applied to ISO 13485? Low risk class 1 devices ISO 13485:2016 - Medical Device Quality Management Systems 3
T Document control ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 5
D Sample Calibration SOP for ISO 13485 General Measurement Device and Calibration Topics 4
F ISO 13485 8.2.3 Reporting to regulatory authorities: Question regarding a procedure for this clause. ISO 13485:2016 - Medical Device Quality Management Systems 4
Q Is that any difficulty to do software DFMEA and PFMEA in ISO 13485? ISO 13485:2016 - Medical Device Quality Management Systems 5
F Hi friends, can anyone show me an example of a procedure for ISO 13485 6.4.1 Work Environment? ISO 13485:2016 - Medical Device Quality Management Systems 2

Similar threads

Top Bottom