ISO 17025:2005 Accreditation for Clean Room Test Services

I

intrestedparty

#1
We are doing Clean Room Testing Services for our clients based on ISO Stadandard for clean room testing. Any country give Accreditation on this services, If which category it falls, It is under Calibration or Testing?, coming under Thermal or what?

Kindly help us on this issues

Regards

Karthi.T
 
Elsmar Forum Sponsor

Hershal

Metrologist-Auditor
Staff member
Super Moderator
#2
Yes, accreditation is possible. You could go as either testing or calibration, depending on how the accrediting body interprets what you do.

You are in India, so I will refer you to NABL, the Indian accrditing body. they are internationally recognized through the Asia Pacific LaboratoryAccreditation Cooperation (APLAC) so your reports will be accepted globally.

Hope this helps.

Hershal
 
I

intrestedparty

#3
ISO 15189:2003 Medical Lab Accreditation

Can we discuss the ISO 15189:2003 Medical Lab Accreditation?

Kindly do the needful

Expecting the valuable discussions

Thanks & Reagrds

Karthi.T
 

Hershal

Metrologist-Auditor
Staff member
Super Moderator
#4
I apologize, I must decline comment on that standard as I don't know it.....I suspect NABL has someone that does however.

Hershal
 
Thread starter Similar threads Forum Replies Date
Z Revision Number vs. Issue Number - Document Control in ISO 17025:2005 ISO 17025 related Discussions 8
K Where to buy ISO/IEC 17025:2005 ISO 17025 related Discussions 4
M Does ISO/IEC 17025:2005 require the Laboratory to have separate ISO 9001 Procedures ISO 17025 related Discussions 4
N Measurement Uncertainty Explanation per ISO/IEC 17025:2005 clause 5.10.4.2 ISO 17025 related Discussions 3
C Buy ISO 17025: 2005 Standard in Singapore ISO 17025 related Discussions 2
AnaMariaVR2 ISO 17025:2005 Checklist ISO 17025 related Discussions 8
Hershal Training in ISO/IEC 17025:2005 - May 2010 Washington, DC ISO 17025 related Discussions 3
A Compliance with ISO/ IEC 17025:2005 Clause 5.9 for Calibration Laboratories ISO 17025 related Discussions 6
Hershal Accreditation to ISO 17025:2005 meets ISO 9001:2008 QMS requirements ISO 17025 related Discussions 5
B Pin Gage Calibration Procedure - ISO 17025:2005 accreditation requirements? ISO 17025 related Discussions 8
Hershal ISO/IEC 17025:2005 Clause 4.1.5 and 4.1.6 ISO 17025 related Discussions 5
S Project Kick-Off - First visit agenda to kick off a ISO/IEC 17025:2005 ISO 17025 related Discussions 1
D Appropriate Equipment for ISO/IEC 17025:2005 Clause 5.6.3.3 - Intermediate Check ISO 17025 related Discussions 5
A Linearity and Eccentricity Point Definitions - Ref: ISO/IEC 17025:2005 ISO 17025 related Discussions 1
G Differences between ISO 17025:1999 and ISO 17025:2005 ISO 17025 related Discussions 4
A Do we have to conduct tests during internal audit of ISO 17025:2005? ISO 17025 related Discussions 8
S Trying to find the actual ISO 17025:2005 standard requirements ISO 17025 related Discussions 6
A Is Waste Disposal addressed in ISO 17025:2005 ISO 17025 related Discussions 7
A How do I address ISO 17025:2005 Clause 4.10 Improvement ISO 17025 related Discussions 3
A Do we need to revise our Quality Policy for ISO/IEC 17025:2005? ISO 17025 related Discussions 2
J Recommendations on calibration interval (frequency) ISO/IEC 17025:2005 para 5.10.4.4 ISO 17025 related Discussions 5
Sidney Vianna ISO/IEC 17025 Revised: ISO/IEC 17025:2005 ISO 17025 related Discussions 16
M Transferring ISO 17025 from one company to another ISO 17025 related Discussions 1
B ISO 17025:2017 risk management Risk Management Principles and Generic Guidelines 0
K Integrating ISO 9001:2015 with ISO 17025:2017 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
X ISO 17025 certification for Laboratory for online gambling products ISO 17025 related Discussions 3
R ISO 17025 - ISO Guides 33 & 80 ISO 17025 related Discussions 1
T ISO 17025: Lockout/Tagout Requirement ISO 17025 related Discussions 1
R ISO 17025 vertical audit checklist wanted Document Control Systems, Procedures, Forms and Templates 2
A ISO 17025 - Methods validation and clients ISO 17025 related Discussions 3
S Thoughts on managing ISO 9001, 13485, IATF 16949 and 17025 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 33
T ISO 17025:2017 requirement 5.7.b. about maintenance the integrity of the management system ISO 17025 related Discussions 1
R Who is the customer in the ISO/IEC 17025:2017? ISO 17025 related Discussions 1
C Compliance with ISO 17025 requirement 8.4.2 - Controls - Records recovery ISO 17025 related Discussions 4
G ISO 17025-2017 Management Review reporting items - Inputs ISO 17025 related Discussions 1
S High voltage testing - ISO 17025 - 7.2.2 Validation of methods and 7.3 Sampling ISO 17025 related Discussions 3
S Internal calibrations - Part of an ISO 17025 accredited testing laboratory (Automotive) ISO 17025 related Discussions 16
I Approved Suppliers ISO/IEC 17025:2017 and used test equipment ISO 17025 related Discussions 6
W Issuing reports under ISO 17025:2017 ISO 17025 related Discussions 2
S The (E) in ISO/IEC 17025:2017(E) ISO 17025 related Discussions 3
T ISO 17025:2017 Clause 4.2.2 - The difference between "be notified" and "be informed" ISO 17025 related Discussions 4
G ISO 17025:2017 Uninterrupted chain of traceability for test laboratories ISO 17025 related Discussions 6
DuncanGibbons Who are ISO/IEC 17065 and 17025 applicable to? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
V IS/ISO/IEC 17025:2017 Clause 7, sub clause 7.11 Control of data and information management ISO 17025 related Discussions 1
V IS/ISO/IEC 17025:2017 Clause 4.1 Impartiality ISO 17025 related Discussions 3
F ISO 17025:2017 Clause 7.7 Ensuring the validity of results - Threshold ISO 17025 related Discussions 9
A ISO 17025 Requirement 6.2 - Department Manager Testing Qualifications ISO 17025 related Discussions 1
F ISO 17025 8.6.2 Customer Feedback Analysis ISO 17025 related Discussions 5
F ISO 17025 8.8 Internal Audits in a segmented company ISO 17025 related Discussions 5
F Faulty Equipment and ISO 17025 General Measurement Device and Calibration Topics 1

Similar threads

Top Bottom