ISO 80369 and endoscope port/lumen

pseudoazurin

Involved In Discussions
#1
Hi,

I am on the disinfection/sterilisation side rather than an endoscope specialist, can I ask what is the proper or correct name for the port/air or liquid inet, and also which ISO 80369 standard would that port falls into. I know that most if not all are Luer lock.

On a similiar note, may get a bit technical and theorical, to clean and disinfect the lumen, we have to use say a Luer lock syringe connect to the port, to ensure the cleaner/disinfectent will pass through the lumen, the connection beteween the syring and the port is air & liquid-tight, so the connecor/port itself is not cleaned/disinfected, is there or has anyone evaluated the risk or how dirty/clean is just the port/connector, that of course, may include viral aersol or chemical. Sorry if I have not make my concern very clear.

Thanks everyone,
 
Elsmar Forum Sponsor

monoj mon

Involved In Discussions
#2
an I ask what is the proper or correct name for the port/air or liquid inet, and also which ISO 80369 standard would that port falls into. I know that most if not all are Luer lock.
If you are talking about Trocars, I mostly call it insufflation port (to inject gas). However, I have seen people calling it "insufflation valve" or "insufflation fitting". Regarding your question about ISO 80369, I saw some people mentioning about ISO 594-1:1986 and ISO 594-2:1998 for Trocars and both of these standards are now replaced by ISO 80369-7 which clearly says "connectors for intravascular or hypodermic application". Due to this, so far I think it is not applicable to Trocars.
 

pseudoazurin

Involved In Discussions
#3
If you are talking about Trocars, I mostly call it insufflation port (to inject gas). However, I have seen people calling it "insufflation valve" or "insufflation fitting". Regarding your question about ISO 80369, I saw some people mentioning about ISO 594-1:1986 and ISO 594-2:1998 for Trocars and both of these standards are now replaced by ISO 80369-7 which clearly says "connectors for intravascular or hypodermic application". Due to this, so far I think it is not applicable to Trocars.
Thanks, not just Trocars, but also flexible endoscopes as well. So is there an ISO 80369 for it, or it is beyound it?
 

monoj mon

Involved In Discussions
#4
I think none of the parts from ISO 80369 is applicable to the endoscopic entry purpose, but I am not 100% sure about it since I didn't read all the parts. I would like to see an expert's comment on it.
 
Thread starter Similar threads Forum Replies Date
P ISO 80369-7 standard - Interpreting which Parts should be in scope Other Medical Device Related Standards 7
E Compliance to standards (ISO 80369) but the ID is out of specification Other ISO and International Standards and European Regulations 0
R ISO 80369-7 Publication Date - 10/14/2016 Other Medical Device Related Standards 7
chris1price ISO 80369 Part 3 Status - Small-Bore Connectors for Liquids and Gases in Healthcare ISO 13485:2016 - Medical Device Quality Management Systems 17
A Scope of ISO 13485 certificate ISO 13485:2016 - Medical Device Quality Management Systems 1
A ASL requirement when the supplier is certified for ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 6
D ISO 9001 certificate issued by QMS International for 10 years - legit? Registrars and Notified Bodies 12
Z Does anyone have experience with EN ISO 17664 ? IEC 62366 - Medical Device Usability Engineering 5
K Medical Device Repairs and ISO Scope ISO 13485:2016 - Medical Device Quality Management Systems 3
K Software Updates in the Field and ISO scope ISO 13485:2016 - Medical Device Quality Management Systems 0
M ISO 13485-2016 online certification ISO 13485:2016 - Medical Device Quality Management Systems 3
Z Auditor Findings ISO 14001:2015 vs. 45001:2015 ISO 14001:2015 Specific Discussions 5
S Thoughts on managing ISO 9001, 13485, IATF 16949 and 17025 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 26
S Supplier Management ISO 13485: 2016- Which supplier needs to fill in a self assessment form? ISO 13485:2016 - Medical Device Quality Management Systems 6
C ISO/IEC 17021-1 clause 7.1.2 - Determination of competence criteria Document Control Systems, Procedures, Forms and Templates 2
G ISO 17023 2017-11 - Suggestions for good books ISO 17025 related Discussions 0
B Timeframe for updating QMS / transitioning from ISO 14971:2012 to ISO 14971:2019 ISO 14971 - Medical Device Risk Management 5
M ISO 9001:2015 and AS6081:2012 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
B Gage calibration frequency, ISO and IATF - What are the requirements Calibration Frequency (Interval) 3
M FDA News FDA Releases Draft Guidance Clarifying Application of ISO 10993-1 Biocompatibility Standard Medical Device and FDA Regulations and Standards News 0
C Implementation ISO 9001: 2015 ? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
C ISO/ IEC 17021 Resource requirement (need help) Document Control Systems, Procedures, Forms and Templates 5
J Possible to get ISO 13485 certified with only OEM Product? ISO 13485:2016 - Medical Device Quality Management Systems 4
D ISO 14971:2019 vs MDR Annex 1, Requirement #4 - "Manufacturers shall inform users of any residual risks" ISO 14971 - Medical Device Risk Management 2
D Definition of equipment for ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 1
L Biological Assessment (ISO 10993-1) Other Medical Device Related Standards 1
M ISO 13485:2016 Complaint Definition Clarity Customer Complaints 2
eule del ayre Documented Information - Periodic Review of Documents? IATF 16949:2016 / ISO 9001:2015 IATF 16949 - Automotive Quality Systems Standard 34
J ISO 9001:2015, ISO 14001 & OHSAS18000 (IMS) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
G ISO 14001 - 6.1.3 Compliance Obligations ISO 14001:2015 Specific Discussions 1
D Rules for Paper Forms outside of an eQMS - 3 Questions (ISO 13485) Document Control Systems, Procedures, Forms and Templates 9
S Qualification question - ISO 13485 Reliability Analysis - Predictions, Testing and Standards 0
K ISO 13485 clause 8.5.2 'Any necessary CA shall be taken without undue delay' ISO 13485:2016 - Medical Device Quality Management Systems 11
Aymaneh ISO 11607-1: 2019 main changes Other Medical Device Related Standards 2
G National Structural Steel Specification 7th Edition - Do I now have to be audited against ISO 3843-3 as well as ISO 9001? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
J How much to charge for helping a startup company with initial ISO 13485 certification? Consultants and Consulting 3
J ISO 13485 System 'soft start' - How to best reflect this in initial audits, management review minutes and other records? ISO 13485:2016 - Medical Device Quality Management Systems 3
L How to understand the clause 6 Planning of ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
D ISO 13485 - 7.3.6 Design and development verification - Do most folks create a separate SOP? ISO 13485:2016 - Medical Device Quality Management Systems 4
B ISO 8536-4 Contamination Index ISO 13485:2016 - Medical Device Quality Management Systems 0
S Practical Implementation of ISO 14971 ISO 14971 - Medical Device Risk Management 6
C ISO 13485 :2016 - CAPA - Does every CAPA need to be checked by regulations? ISO 13485:2016 - Medical Device Quality Management Systems 9
L Process changes and biocompatibility (ISO 10993-1) Other Medical Device Related Standards 1
J Recommendations for online ISO 19011 training? Training - Internal, External, Online and Distance Learning 6
D ISO 13485 8.2.1 and 8.2.2 - Customer Feedback and Customer Complaints ISO 13485:2016 - Medical Device Quality Management Systems 5
S Requirements to obtain ISO 50001 Certification ISO 14001:2015 Specific Discussions 2
A ISO 11135:2014, B.1.4, BI resistance x product bioburden ISO 13485:2016 - Medical Device Quality Management Systems 6
Sravan Manchikanti How to interpret '8.3 Control of nonconforming product' for SaMD device while implementing ISO 13485 & MDSAP ISO 13485:2016 - Medical Device Quality Management Systems 4
J Sister-company providing parts is only ISO 9001 registered IATF 16949 - Automotive Quality Systems Standard 7
M Getting started in ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 21

Similar threads

Top Bottom