ISO17025 vs. ISO9001:2000 Comparison

S

Steve-UK

#1
I am currently to embark upon amending our current ISO17025 QMS to satisfy both ISO17025 and ISO9001:2000. Firstly has anyone produced a table comparing these two standards, clause by clause?

Also has anyone gone through the same process and has any tips for me? I'd appreciate any gems of wisdom you may have as the thought of it is keeping me awake at nights! :bonk:

Thanks
Steven
 
Elsmar Forum Sponsor
J

Jimmy Olson

#2
Steve,

If you feel like expending some time and effort, there is a table at the back of 17025 that cross-references to 9001:1994. You can then cross-reference 9001:1994 with 9001:2000. I know this is a big pain and the long way to do it.

I haven't seen any table that directly compares 17025 and 9001:2000, but I have heard rumors that ISO is considering alligning 17025 with 9001:2000. I'm not sure exactly what this means, or how this would be done, or even if it is still being considered. Has anyone else heard anything about this?
 
S

Steve-UK

#3
Thanks Richard,

I thought of doing it this was but as you say - quite a lot of work involved. I assumed/hoped this might have been done by someone already.

< .....but I have heard rumors that ISO is considering alligning 17025 with 9001:2000. I'm not sure exactly what this means, or how this would be done, or even if it is still being considered. Has anyone else heard anything about this?>

I've seen something about this too. I think it was on the CEOC website. 17025 was last issued in 2000 so it wouldn't have thought it was due for review/amendment yet.

Thanks anyway for your suggestion. I suppose I'll just have to do the spadework!
 
J

Jimmy Olson

#4
Steve,

I've tried looking for a comparison of the two and haven't had any luck. I've actually started working on a comparison myself though (figured it would be nice to have).

As for the allignment issue, apparently there was a meeting on July 5th of this year to discuss it and there was a decision to make an ammendment to 17025 (I think). There is supposed to be another meeting in December (on the 12th I think).
 
S

Steve-UK

#5
Richard,

I have already made a start on this. I did it a few weeks ago and haven't had chance to check it for accuracy. Be warned it was done in a rush and is very basic! Still, it's a start and it may be of use to you. I don't think it says but obviously it's ISO 9001:2000 I'm using.

I'll try to attach it to this post. As I haven't done this before give me a shout if it doesn't work and I'll e-mail it instead.

Regards
Steven

:bigwave:
 

Attachments

J

Jimmy Olson

#6
Steve,

That looks pretty good. It's pretty similar to what I'm working on. I'll put mine up once it's done.

Good luck on merging the two :D
 
D

DGX-David

#7
Exactly what I was looking for (but for ISO9001:2008) - Did you finish your comparison?
 
W

widamoro

#9
i have a french document comparing the 2 standards on some points (sorry it's in french!). i'll send you later bur it's in the INRA's site.

(sorry i have to send 5 posts to put the link, so i gonna send other posts)
 
Last edited by a moderator:

Stijloor

Staff member
Super Moderator
#10
i have a french document comparing the 2 standards on some points (sorry it's in french!). i'll send you later bur it's in the INRA's site.

(sorry i have to send 5 posts to put the link, so i gonna send other posts)
Describe the link, and a Moderator can activate the link.

I assume that the document is not copyrighted, otherwise it can not be posted. Let us know.

Stijloor, Forum Moderator.
 
Thread starter Similar threads Forum Replies Date
S Comparison: ISO9001:2000 v ISO17025 ISO 17025 related Discussions 4
D Cross-Reference between ISO9001:2008 and ISO17025:2005 ISO 17025 related Discussions 3
K Combining ISO17025 with ISO9001 Documentation - Product is standard solutions ISO 17025 related Discussions 3
G ISO17025 Certification with out ISO9001 ISO 17025 related Discussions 2
M What are the changes in supervising according to ISO17025? ISO 17025 related Discussions 7
W My company is looking to start a materials testing lab that conforms to ISO17025:2017 ISO 17025 related Discussions 3
B Grading of non-conformities for ISO17025:2017 ISO 17025 related Discussions 5
C ISO17025 for In-House Calibration Labs: Is it required? ISO 17025 related Discussions 30
Jerry Eldred ISO17025 Accreditation Not Required For Compliance ISO 17025 related Discussions 1
M ISO17025 Testing Laboratory Equipment Calibration Requirements ISO 17025 related Discussions 4
S Advice for ISO17025 First Round of Internal Audits ISO 17025 related Discussions 10
G ISO17025 requirement in TS16949 for External Calibration Laboratories ISO 17025 related Discussions 4
Jerry Eldred ISO17025 vs. Z540 M&TE vs. Standards Laboratory ISO 17025 related Discussions 7
P Dimensional Mechanical Inspection only as a Service - ISO17025 or ISO17020 ISO 17025 related Discussions 5
Z Don't quite understand interpretation of ISO17025: 2005 clause 1.4 and 1.2 ISO 17025 related Discussions 13
M Drafting Quality Manual for ISO17025 ISO 17025 related Discussions 10
B If not ISO17025, what are the other types of accreditations that I can use? ISO 17025 related Discussions 6
B Effect of Calibration Laboratory Changing Ownership & Moving on ISO17025 registration ISO 17025 related Discussions 4
D Defining ISO17025 Calibration Laboratory Technical Competency ISO 17025 related Discussions 1
E Conflict? 2 Technical Managers identified (one for EMC, one for Reliability) ISO17025 ISO 17025 related Discussions 8
B EU REACH Regulation - is ISO17025 accreditation required for internal labs? ISO 17025 related Discussions 6
B Measurement Uncertainty (MU) vs. Level of Certainty - ISO17025 para. 5.1.1 ISO 17025 related Discussions 8
A Are ISO 9001 certified companies required to use ISO17025 facilities for calibration? ISO 17025 related Discussions 13
D External Laboratory Inquiries (ISO17025) - Product validation process Per AEC-Q100 ISO 17025 related Discussions 3
T Help with MU and ISO17025 basics - Hired as a CMM programmer ISO 17025 related Discussions 17
V When do ISO17025:1999 Accreditations expire? ISO 17025 related Discussions 4
R Looking for a company in Colorado - ISO17025 certification consulting & training ISO 17025 related Discussions 1
K Differences - ISO17025:1999 vs. ISO17025:2005 - The addition of "Improvement" in 4.10 ISO 17025 related Discussions 16
B Z540 vs. ISO17025 Comparison Matrix - Calibration Customers who still insist on Z540 ISO 17025 related Discussions 3
A ISO17025 Quality Manual - Calibration - Radiotherapy and radiation protection ISO 17025 related Discussions 0
S Is a low calibration TUR acceptable in the eyes of ISO17025 and TS16949? 4:1 TUR Rule ISO 17025 related Discussions 2
K Should QS/TS certified internal test/calibration labs be required to be ISO17025 ISO 17025 related Discussions 16
R Guide 25 vs. ISO17025 - Substantially more requirements in ISO 17025 ISO 17025 related Discussions 12
Pau Calvo Quality Management process is mandatory in ISO9001? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
I Form templates for software (iso9001) Document Control Systems, Procedures, Forms and Templates 0
T COVID, Furlough and ISO9001 Surveillance Audit Coffee Break and Water Cooler Discussions 2
S Are there ISO9001:2015 Requirements for Preventive Maintenance? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 36
D ISO9001 for one man company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
S What's meant by ISO9001 clause 8.7 non conforming output? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
A ISO9001:2015 Document control and training aids ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
G Calibration: Conforming to ISO9001 Requirements General Measurement Device and Calibration Topics 6
H Communication plan according to ISO9001 - Pharmaceutical field Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 3
R Major nonformance finding was given during a closing meeting of a ISO9001 certification audit General Auditing Discussions 76
S ISO9001:2015 Clause 9.1 - What the external auditor will look at? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
N Is consultant prohibited in ISO9001 audit? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 66
S ISO9001:2015 6.3 - Planning of Changes - OFI from auditor ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 20
I ISO9001:2015 9.1.2 - Customer Satisfaction Feedback ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
L Is writing out the ISO9001:2015 standard full name a requirement ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 37
R ISO13485/ISO9001 Convenient Document Management System Document Control Systems, Procedures, Forms and Templates 3
E Interesting Discussion Was this the fastest ever stage 2 ISO9001:2015 audit? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 76

Similar threads

Top Bottom