JMP Gauge R&R with FORD MSA Data

J

Jeffalex

#1
Hi- Great Forum, my first post! :bigwave:

I am trying to check my JMP Gauge R&R Analysis with the Ford MSA Data provided in another thread.

I've run the GR&R on JMP but the results don't match any of the methods shown in the "Required Outputs" table. JMP shows a GR&R of 7.78 with the Ford MSA Data. The JMP GR&R report for the FORD MSA is attached..

I've also checked the Ford Data with one of the Excel sheets provided on the forum, "08 MSA GRR Example1.xls". This example matches using the Average and Range method.

Anyone have ideas on how to get JMP to correlate with the Ford data?

Thanks in advance!
-jeff
 

Attachments

Elsmar Forum Sponsor
B

Bezerra

#3
Hi,

i was trying to find a solution to your problem however i couldn't find the Ford MSA Data you talked about.

i don't use JMP but i goggled it and it seams to have many options to calculate the GRR, so if you want, send me the values of the readings of your trial, and i will compute it on my spreadsheets to see if i can find why are you having different values.
 
Thread starter Similar threads Forum Replies Date
B Histogram beginner dilemma - Manual Calculation vs. JMP 7 Quality Tools, Improvement and Analysis 12
V Any experience/feedback on statistical software tools...minitab -design expert -JMP Using Minitab Software 4
Q JMP Measurement Capability Analysis Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
A How to Subset Pareto Cause in JMP using JSL Software Quality Assurance 4
I Using validated SAS JMP to validate Excel for Statistical Analysis? Qualification and Validation (including 21 CFR Part 11) 11
R Custom DOE (Design of Experiments) Analysis in JMP Quality Tools, Improvement and Analysis 11
R A JMP Demostration of Sigma Level Computation Imported Legacy Blogs 1
A Help with JMP Variance Components for P/T Calculation Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
T Help With GR&R (Gage R&R) on JMP ***JMP people please help*** Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
ScottK Minitab vs JMP: compare, contrast, recommend? Quality Tools, Improvement and Analysis 2
D Tolerance Limit Constants - Calculating tolerance limits using JMP Statistical Analysis Tools, Techniques and SPC 1
B Destructive Testing GR&R (Gage R&R) - Track tester - JMP Program Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
I How many gauges in a Go/No Go Gauge? General Measurement Device and Calibration Topics 7
J Standard used to determine if check fixture gauge is acceptable Reliability Analysis - Predictions, Testing and Standards 2
J Designing new gauge tracking software IATF 16949 - Automotive Quality Systems Standard 4
R Gauge R&R on pre-set torque wrench Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
C Aluminum galling on thread plug gauge Manufacturing and Related Processes 10
J Gauge R&R on a torque measurement Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
K I’m looking for a square probe for my linear height gauge Manufacturing and Related Processes 1
A Gauge Study for Small Lots Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
G Supplier Checking With Gauge Pin Problem Solving, Root Cause Fault and Failure Analysis 2
H Analog Pressure Gauge with no EN837 accuracy class information General Measurement Device and Calibration Topics 5
G Gauge R&R on multiple dimensions using 3D measurement system Capability, Accuracy and Stability - Processes, Machines, etc. 6
H Thread Plug Gauge Tolerances General Measurement Device and Calibration Topics 3
R Do Brands Matter When Purchasing Bore Gauge? General Measurement Device and Calibration Topics 2
D Using "Particle Size Standard" templates as gauges - How to avoid giving a gauge # while using for process control? General Measurement Device and Calibration Topics 2
D AS9100 Inspection records - Is there a requirement to have gauge ID and calibration status AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
G Comparing Gauge Blocks - Translating the calibration between the master set and the QA set General Measurement Device and Calibration Topics 2
F Gauge R&R & Calibration Intervals Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 14
Ron Rompen Source needed for Spline Form gauge (GO and NOGO members) General Measurement Device and Calibration Topics 3
S How to calculate the maximum allowable hysteresis of a pressure gauge General Measurement Device and Calibration Topics 1
S Gauge R and R - Product - Conveyor belt with threads that goes on Sprocket Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
R Feeler Gauge Calibration - What tolerance is used for calibrating feeler gauges? General Measurement Device and Calibration Topics 4
F Holes position inspection - Calculation of centre distance and plug sizes of a gauge Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
K Measurement Uncertainty Budget (MU) of for Ultrasonic Thickness gauge Measurement Uncertainty (MU) 1
R Radius Gauge R&R Study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
A Calibration of Pressure Gauge, How to Determine Calibration Tolerance General Measurement Device and Calibration Topics 1
S Thread Ring Gauge verification General Measurement Device and Calibration Topics 6
G Uncertainty Budget Examples for Caliper, Micrometer and Dial Gauge Measurement Uncertainty (MU) 3
S Pressure Gauge Calibration Uncertainty Calibration and Metrology Software and Hardware 5
N Correct reading for analog pressure gauge ISO 17025 related Discussions 2
Ron Rompen Gauge Design Standards Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
B Gauge CAD certification to Part CAD vs. Gauge certification to Part CAD General Measurement Device and Calibration Topics 1
shimonv Feeler Gauge as a Medical Device Accessory EU Medical Device Regulations 3
C Proper Thickness Gauge for Foam/Felt and Soft Materials General Measurement Device and Calibration Topics 5
J What kind of Tool and Gauge in IATF 16949 Clause 8.5.1.6? IATF 16949 - Automotive Quality Systems Standard 1
alonFAI Gauge R&R for a Peel Tester (tensile tester) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
R Height gauge to measure short hard to access heights General Measurement Device and Calibration Topics 3
V Why Gauge R&R 10% is acceptable for variable instruments ? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
B Can we calibrate a standard pin with a gauge? General Measurement Device and Calibration Topics 2
Similar threads


















































Top Bottom