Job Safety - Lockout/Tagout and Respiratory Protocols

JAMESH

Registered
#1
Good morning.
I have been tasked by my company with writing some processes related to workplace safety (Lockout/Tagout and Respiratory Protocols specifically).
Since I have no real experience with these types of things and don't want to botch things up, I am doing a lot of research. As you can imagine, this is a whole new world for this old quality dog.
I know it's probably too much to hope that there is something out there for safety professionals that is as good as Elsmar is for quality folks.
But I'm hoping that you folks here might be able to offer some suggestions.
I'm located in Ohio USA.

Have a great Easter.
 
Elsmar Forum Sponsor

Randy

Super Moderator
#2
Yep, been doing safety 30+ years and have a degree in it (audit 18001 & 45001 as well), I do a bunch of my refresher training and other stuff here, it's inexpensive and very good. I'd recommend OSHA 10 Hour General Industry, Introduction to Job Hazard Analysis and OSHA Hazcom-GHS to start. There is also Health & Safety Management.

Just scroll down the page

Online Training Course Catalog | Safety Unlimited

Understand that there is always liability that can be assigned to you as the safety guy. You need to really get a handle on 29CFR 1910 General Industry regulations especially before you start prescribing any "protocols" for LOTO and Respiratory Protection

Lion Technology also offers some of what you might need on this page for LOTO, Forklift, and others.

Lion Technology Training Course Catalog - Lion Technology
 
Last edited:

JAMESH

Registered
#3
Thanks Randy.
Took the 10 hour course about 18 months ago. A good overview. I do worry some about the liability issue, more from the standpoint of just not wanting people hurt than from any legal concern. Will look into the sites you recommend. Thanks again.
 

Randy

Super Moderator
#4
OK great 10 hour is a good start. I use both sites regular for refresher training in a couple subjects and CPD's for my credentials
 
Thread starter Similar threads Forum Replies Date
B Product Safety Responsibility - Job shop such as a machine shop AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 10
L Job Safety Analysis (JSA) help wanted!! Occupational Health & Safety Management Standards 4
B Using FMEA for Job Safety Analysis? FMEA and Control Plans 6
C Refreshing an old and boring topic - Job descriptions and Roles vs Process Documentation ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
BeaBea Organizational Charts and Job Titles Process Maps, Process Mapping and Turtle Diagrams 9
M IATF 16949 8.5.1.3 Verification of job set-ups - Do we need secondary check? IATF 16949 - Automotive Quality Systems Standard 7
S Regulatory job in pharma vs. medical device US Food and Drug Administration (FDA) 16
S Regulatory job in pharma vs. medical device CE Marking (Conformité Européene) / CB Scheme 0
Marc Job Opening - 1-4-2020 Job Openings, Consulting and Employment Opportunities 0
M Do I Expect Too Much of Job Candidates? Career and Occupation Discussions 33
JAMESH Building a "Lean" Job Shop Training Program Training - Internal, External, Online and Distance Learning 0
I "On the job training" as a response to how someone was trained? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 75
M Nonconformity for missing form number on the job description document Nonconformance and Corrective Action 1
Sidney Vianna Are the Accreditation Bodies doing their job? Keeping CB's accountable Registrars and Notified Bodies 0
T QMS Template Help - Small machine shop/job shop Manufacturing and Related Processes 1
I ISO 9001:2015 - On the Job Training and Records Training - Internal, External, Online and Distance Learning 4
G Job interview - So I have to do a presentation on PPAP APQP and PPAP 16
F Job Travelers questions - unsigned operations AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 41
Marc Posting Job Openings - Read Me Please - 27 January 2019 Job Openings, Consulting and Employment Opportunities 0
K Assigning the Correct Procedures Applicable to Job Titles General Auditing Discussions 15
W Job Card/Router sign off - Want to go paperless AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
S Is management representative a temporary post or a job title Management Review Meetings and related Processes 16
Q Have you ever "excluded" certain job descriptions from the QMS? ISO 13485:2016 - Medical Device Quality Management Systems 10
C IATF 16949 Cl 8.5.1.3 - Verification of job set up IATF 16949 - Automotive Quality Systems Standard 4
D How do you use statistics in your job Statistical Analysis Tools, Techniques and SPC 6
Sam Lazzara Notified Body CE Project Manager - Worst job ever? EU Medical Device Regulations 6
D Job Titles referenced in Procedures IATF 16949 - Automotive Quality Systems Standard 18
Marc How did you "get" a full-time job? (A 2017 discussion) Career and Occupation Discussions 11
M Apply for a job when no opening is posted? Career and Occupation Discussions 64
M AS9100D excluding Design and Development - Small Job Shop AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 18
A Splitting Paper Routing Job Worksheets AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
N I updated my Job Description - Critiques Appreciated Career and Occupation Discussions 22
S Job travelers through a machine shop AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
L South of England - experienced Auditor / QMS looking for a new job Career and Occupation Discussions 1
I ISO 17025 Job Descriptions - People who have mutiple roles ISO 17025 related Discussions 2
A Best Method of Auditing an Installation Process at a client job-site ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
H Job Interview Question - Faulty machine Manufacturing and Related Processes 8
M Taking on a job outside of our ISO Scope ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
X Question about Job Documentation Requirements ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
H Job Descriptions to comply with ISO Standards ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
B Suggestions for job interview regarding CCD's (Charge Coupled Device) Quality Tools, Improvement and Analysis 3
O New Job 1 Month from Recertification Audit - Missing Documents, no Internal Audits ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 25
Z Control of Job Aid Videos Quality Manager and Management Related Issues 2
H AS9100 - Accountability for Job Travelers AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 25
R Gage Identification Methods in a Job Shop Calibration Frequency (Interval) 8
P Leadership Standards - New job as Quality Manager Quality Manager and Management Related Issues 9
S Calibration Engineer and Calibration Technician Job Interview Questions General Measurement Device and Calibration Topics 2
R Should the CEO Need a Job Description? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
Wes Bucey The "Informational Interview" - a job hunt tip? Career and Occupation Discussions 2
Q Help With Airflow Control in a mid sized Job Shop in Southwest Florida Manufacturing and Related Processes 2
Similar threads


















































Top Bottom