Just starting out looking to get into a quality engineer position

D

dotwarez

#1
What are some good entry level points for someone just starting out looking to get into a quality engineer position. Also would ASQ certifications as an entry level candidate do me any good ?

I finished my B.S degree from University of Illlinois at Chicago in Information Decision Science last May.

I am 29 years old and working in production at a small printing company and it is dead end. My degree was half business half IT and I live in Chicago but I would like to move to Wisconsin.

Wisconsin being a manufacturing state I believe I would have more opportunities if I pursued Jr quality positions in the manufacturing sector rather than IT.

Any help would be greatly appreciated !

-Olaf
 
Elsmar Forum Sponsor
P

PaulJSmith

#2
First off, welcome to The Cove, Olaf!

Aside from your career decision dilemma, you might want to take a look at the minimum requirements for CQE from ASQ (found here). Pay particular attention to the section titled Education and Experience.

I worked at a small printing company in St. Louis back in the mid- to late 1980s, and it was a dead end career even back then. That industry has been dying a slow death for a long time. So, I know what you mean.

That being said, figure out what you want to do, and do it.

Good luck.
 
Thread starter Similar threads Forum Replies Date
B Starting a small boutique and looking for business ideas Career and Occupation Discussions 8
GStough Suppliers Starting to Charge A Fee for Customer Audits Supplier Quality Assurance and other Supplier Issues 14
R Starting an automotive containment business Service Industry Specific Topics 3
H Starting my own 3rd party inspection company Service Industry Specific Topics 6
qualprod Setup time only at starting production? Lean in Manufacturing and Service Industries 5
J Starting a Weibull Analysis: Source on how to perform Weibull Reliability Analysis - Predictions, Testing and Standards 2
S Starting an ISO 41001:2018 Facility management system Other ISO and International Standards and European Regulations 3
Marc Goldsmiths University will take beef products off the menu starting in September 2019 Sustainability, Green Initiatives and Ecology 19
J Starting from scratch - a plethora of challenges for a new Lumber Mill Machine Shop Quality Management System (QMS) Manuals 11
supadrai ISO 27000 - Starting from Scratch for a Smallish Law Firm IEC 27001 - Information Security Management Systems (ISMS) 4
J Implementation of Total Quality Management/Starting a Quality Department Reliability Analysis - Predictions, Testing and Standards 9
Q Presentation for Employees - Starting the ISO 9001:2015 Transition ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
C I'm starting my Career in Quality Assurance Career and Occupation Discussions 8
J Starting from the factory floor get any respect? Coffee Break and Water Cooler Discussions 13
C FMEA Starting point FMEA and Control Plans 7
L Starting an Internal Audit - Help with the basics Internal Auditing 12
M Contract Manufacturer 510K Starting Point 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 13
L Hand-starting threaded fasteners Benchmarking 3
C Starting a Quality Department from Scratch and Implementing ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 32
M Starting out toward compliance Imported Legacy Blogs 0
M Starting ISO 17025 Accreditation from scratch - Petroleum Laboratory ISO 17025 related Discussions 3
N Overwhelmed starting a new aviation related business AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 19
O Aerospace Registrar Problems - Starting Over? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 13
Jen Kirley Starting Something New Career and Occupation Discussions 104
bobdoering Finally, evidence that people are starting to care about Apple computers After Work and Weekend Discussion Topics 7
M Implementing a Quality System - Just starting out..... in over my head. Quality Tools, Improvement and Analysis 12
E Starting Nadcap Accreditation and making an Implementation Timeline AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
F Starting a Quality Control Program and writing a Quality Control Manual Quality Manager and Management Related Issues 10
T Document Control Revision - Starting Over Document Control Systems, Procedures, Forms and Templates 1
Q How raise en ECO starting from a NC - ECO after NCR? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
B Template for starting up new manufacturing facility in our company AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
A Starting Supplier Management System in a Company Supplier Quality Assurance and other Supplier Issues 4
K Starting a new Calibration and Repair Laboratory General Measurement Device and Calibration Topics 15
B Starting a business in Dubai Career and Occupation Discussions 1
B Implementing APQP - Starting a fresh.... APQP and PPAP 6
R ANSI Z1.9 AQL 0.4 - What are the starting equipment expectations? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
K Starting an ISO 17025 Accredited Laboratory ISO 17025 related Discussions 15
M Petrol (Gasoline) Prices Around the World - Part Trois Starting January 2011 Coffee Break and Water Cooler Discussions 25
C Starting an MSA study - How to decide which is appropriate or required Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
R Starting In-Process Quality Inspection in the Production Shopfloor Inspection, Prints (Drawings), Testing, Sampling and Related Topics 13
Ajit Basrur Starting Sustainability Initiatives in our Organization Sustainability, Green Initiatives and Ecology 15
C Rebuilding the QMS - What is a good starting point? Quality Manager and Management Related Issues 13
Z Long Term Measurement Logging for Machine Shop - Starting with a clean slate Statistical Analysis Tools, Techniques and SPC 3
E Starting to write a Quality System Manual - Import/export medical devices - Need help ISO 13485:2016 - Medical Device Quality Management Systems 1
S Starting up a new Calibration Laboratory General Measurement Device and Calibration Topics 18
B Starting a new Quality System ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 17
A Starting the journey (ISO 9000 awareness) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
T CE Marking regulation of construction products starting on January 2009 CE Marking (Conformité Européene) / CB Scheme 4
B Tips for JUMP STARTING Job/Career Search? Career and Occupation Discussions 8
Ajit Basrur Starting ISO 14064 Green House Gas (GHG) program Miscellaneous Environmental Standards and EMS Related Discussions 9

Similar threads

Top Bottom