K1, K2 and K3 factors - Does anyone know how to calculate them?

T

thi.bach

#1
Hello Everyone!
I am doing an GRR analysis to aprove a measure system. Its an multimeter and i'm able to take more samples than 10. But then, i'm unable to find the appropriate value to k3. Do someone knows how to calculate the value of this factors?
Thanks a lot

Thiago Bach
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
G What to do with correction factors overlooked by an accredited standard (6.4.11)? ISO 17025 related Discussions 5
P Human Factors / Usability validation in the time of COVID Human Factors and Ergonomics in Engineering 17
C Kaizen Events - Factors Affecting Failure Lean in Manufacturing and Service Industries 13
D Is Human Factors testing mandatory for a 510(k) submission? Human Factors and Ergonomics in Engineering 16
J Selecting factors for screening DoE design Statistical Analysis Tools, Techniques and SPC 8
T Determination of TENSION SAFETY FACTORS - Table 21 IEC 60601-1 Other Medical Device Regulations World-Wide 5
J DoE (Design of Experiments) - Multiple responses with different factors Using Minitab Software 2
P Usability/human factors engineering requirement (standard) for IVD medical device Other Medical Device Related Standards 2
A Interesting Discussion Human Factors as Root Cause AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 13
P Global medical device human factors/usability requirement IEC 62366 - Medical Device Usability Engineering 3
M Medical Device News FDA News - 14-09-18 - Benefit-Risk Factors to Consider for Substantial Equivalence Other US Medical Device Regulations 0
H Minitab 15 - Factorial Design - 3 factors: 4x3x2 - How to? Using Minitab Software 4
P Interesting Discussion Addressing Human Factors in Corrective Action AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 23
M I have 3 different factors - DOE help Statistical Analysis Tools, Techniques and SPC 3
A How do I create a 3^k factorial design with factors be treated as continuous where I Using Minitab Software 0
V Screening DOE with 7 Input factors and 4 responses - Significant factors Using Minitab Software 1
H Taguchi mixed model DoE [L16 (4^3 2^6): factors interaction and ANOVA calculation Using Minitab Software 3
S Taguchi Design with ANOVA - 3 factors each with 3 levels Quality Assurance and Compliance Software Tools and Solutions 13
R Is there any Excel .xls Spreadsheet available for DOE with 3 factors? Six Sigma 1
T New EU Medical Device Regulations - Q1/2 2017 and Human Factors Other Medical Device Related Standards 10
M New MHRA guidance on Human Factors - Usability Engineering IEC 62366 - Medical Device Usability Engineering 1
L BSI White Paper on Human Factors/Usability Engineering IEC 62366 - Medical Device Usability Engineering 12
M Requiring action on factors alone of RPN in FMEA APQP and PPAP 7
S IEC 62366 vs. FDA Human Factors Requirements Human Factors and Ergonomics in Engineering 2
S DOE Analysis - Experiments with 5 Factors Statistical Analysis Tools, Techniques and SPC 11
Ajit Basrur FDA issues Guidance Document - Benefits-Risks Factors to consider for 510(K) US Food and Drug Administration (FDA) 1
C MU (Uncertaincy of Measurements) definition and MU Factors Measurement Uncertainty (MU) 4
E ANOVA for Taguchi method - Four factors and three levels and nine runs (Minitab) Using Minitab Software 6
M How to compare 2 independent samples having 3 factors 3 levels Statistical Analysis Tools, Techniques and SPC 5
Y Taguchi Design with 6 levels and 3 factors in Minitab Using Minitab Software 11
J When to use k-Factors vs TUR Measurement Uncertainty (MU) 6
R Taguchi design for 3 level 4 factors Using Minitab Software 12
V Selection of Design - 8 Factors, almost sure about Target Levels Using Minitab Software 8
R 4 Factors 3 Level DOE to determine which factors are significant Using Minitab Software 2
C Cost Factors of Iso 8 vs. ISO 8/9 Cleanroom Other Medical Device and Orthopedic Related Topics 2
M Human Factors Testing for CE Marking of a Cosmetic Device CE Marking (Conformité Européene) / CB Scheme 9
Z A DOE in Minitab - 3 factors and 3 levels for each factor Using Minitab Software 12
J What are the Design Factors in APQP? APQP and PPAP 3
Q Risk Factors Checklist identifying the Risks for meeting the Customer Indent AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
B DOE Question: 3 factors with 2 levels and 1 factor with 3 levels Six Sigma 2
C Analyzing 3 Factors 3 Levels using Minitab Using Minitab Software 9
J Metal Stampers Feasibility form that includes Risk Factors IATF 16949 - Automotive Quality Systems Standard 5
J DOE Analysis Experiment, 5 factors, 4 factors having 3 levels, and 1 factor having 5 Using Minitab Software 38
D What Factors to consider to determine the Number of Auditors Internal Auditing 3
E 5^2 DOE (Design of Experiments) with 3 Replications, 5 Levels 2 Factors Statistical Analysis Tools, Techniques and SPC 6
N Applying Correction Factors to Furnaces Manufacturing and Related Processes 5
D Resolution V Factorial Design with 5 factors (3 numerical and two text) Using Minitab Software 1
N CE Mark and Third Party Companies Evaluation Factors CE Marking (Conformité Européene) / CB Scheme 5
L DOE with 2 factors (3,4 levels) and optimized factor Using Minitab Software 12
C Packaging Shock Testing - Examples of Fragility and g-factors Other ISO and International Standards and European Regulations 3

Similar threads

Top Bottom