Laser Micrometer for checking Thickness of Steel - Any Recommendations or Comments

D

dbulak

I have been asked to investigate the possibility of buying a laser micrometer for checking the thickness of steel. Does anyone have one and and are you happy with it? Any recommendations would be helpful. I have been on the internet looking, but would like to hear from someone who has one.
As always, thanks in advance!
 
Stijloor

Stijloor

Leader
Super Moderator
Re: Laser Micrometer for checking Thickness of Steel - Any Recommendations or Comment

dbulak said:
I have been asked to investigate the possibility of buying a laser micrometer for checking the thickness of steel. Does anyone have one and and are you happy with it? Any recommendations would be helpful. I have been on the internet looking, but would like to hear from someone who has one.
As always, thanks in advance!
Click to expand...

Any laser micrometer experts that can help?

Thank you!!

Stijloor.
 
E

Ettore

Quite Involved in Discussions
Re: Laser Micrometer for checking Thickness of Steel - Any Recommendations or Comment

dbulak said:
Does anyone have one and and are you happy with it? Any recommendations would be helpful.
Click to expand...

I'm sorry :( we don't use laser micrometer but only mechanicals or Ultrasonic or others. (radioactive isotopes)
if could be useful this is any of ours vendors for measurements of products on the hot and cold rolling lines, Galvanizing lines, and pickling lines.

Ims Isotopen Mebsystemen Gmbh

PSYSTEME GmbH - Unternehmen

http :// www. geinspectiontechnologies. com /stresstel/ - DEAD - 404 - LINK UNLINKED

Bye
 
Last edited by a moderator:
E

erbearica

Re: Laser Micrometer for checking Thickness of Steel - Any Recommendations or Comment

We have had 2 laser mics here. We are not that impressed with them. We are in the process of replacing it with an ultrasonic thickness gauge.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
M Laser Micrometer Suggestion (if any) for diameters that are +/-.0001 inch General Measurement Device and Calibration Topics 1
T A question on Calibration on In-line Laser Micrometer General Measurement Device and Calibration Topics 1
D Laboratory where we can have parts checked for Thickness with a Laser Micrometer General Measurement Device and Calibration Topics 6
P How to Calibrate Laser Micrometer when no Calibration Company in the Country? General Measurement Device and Calibration Topics 3
M Choosing a Laser Micrometer - Your recommendations? General Measurement Device and Calibration Topics 8
C Gage Resolution / Measurement Accuracy - Laser scan micrometer has a 6 digit display General Measurement Device and Calibration Topics 4
C Laser Micrometer Uncertainty - Calibrating Deltronic Pin Gages Measurement Uncertainty (MU) 5
J Laser mike beam spot size Calibration and Metrology Software and Hardware 0
J Laser length measurement system General Measurement Device and Calibration Topics 3
Aliken Registration veterinary medical device (laser) requirements Medical Device and FDA Regulations and Standards News 2
G Remove & Reapply Laser Mark on Steel Manufacturing and Related Processes 1
F Product classification according to the 60601-2-57: Particular requirements [...] of non-laser light sources [...] IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
M Process FMEA for Laser Cutting/Press Brake/Welding FMEA and Control Plans 3
Judy Abbott General temperature used in the blasting process and laser process Manufacturing and Related Processes 2
Judy Abbott The impact of laser power on biocompatibility of the products Manufacturing and Related Processes 6
V Laser Welding Process - Impact on Electrical Properties Reliability Analysis - Predictions, Testing and Standards 4
M Lean: Conducting Capacity Study, calculating Cycle times on laser cutting machines Lean in Manufacturing and Service Industries 2
Z Is IQ necessary for laser marking validation? EU Medical Device Regulations 3
Beliz Biocompatibility Testing for Laser Epilation Device EU Medical Device Regulations 2
M Cleaning Process after laser marking on orthopaedic implants Other Medical Device and Orthopedic Related Topics 3
M Informational US FDA Laser guidances Medical Device and FDA Regulations and Standards News 2
V Class IV Laser Regulations IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
E Requirements for hand-held laser welding equipment Other ISO and International Standards and European Regulations 0
J Installation Qualification (IQ) and Operational Qualification (OQ) for Laser Marking 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
S Medical Device Classification - Laser Guided Positioner EU Medical Device Regulations 2
Pmarszal Precise Laser Printer: Recommendation Manufacturing and Related Processes 2
G Traceability of laser based x-y measuring machine General Measurement Device and Calibration Topics 5
M Laser Etching Advice for Permanent Device Marking Manufacturing and Related Processes 5
A How to Calibrate Laser Beam Tester & Radiation Monitor General Measurement Device and Calibration Topics 3
G Metrology Laser Reliability General Measurement Device and Calibration Topics 2
B IEC 60825-1 Class 3R Laser Off-The-Shelf or Custom Label Needed Other ISO and International Standards and European Regulations 3
A Is IEC 80601-2-60 necessary for Dental Laser? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
A Innovation in Laser Welding Manufacturing and Related Processes 2
J Kanomax hand held Laser Particle Counter Calibration Calibration Frequency (Interval) 6
A Standards for Emergency Button for a Dental Laser IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
G Laser Wavelength Traceability for Laser Interferometers General Measurement Device and Calibration Topics 4
G Laser Precision Linear Measurement - Inherrent Accuracy of 10 -6 - Nice PDF Paper General Measurement Device and Calibration Topics 1
A Dental Laser Certification IEC 62304 for a Firmware IEC 62304 - Medical Device Software Life Cycle Processes 1
A Type of Materials to comply with IEC 60601 (Dental Laser Case) IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
P White Light vs. Laser Scanner - Investing in a 3d Scanner Quality Tools, Improvement and Analysis 6
S FDA releases Updated Laser Products Regulation Other US Medical Device Regulations 1
P Laboratory Scope for a Laser Fabrication Shop IATF 16949 - Automotive Quality Systems Standard 2
F Process FMEA for Welding and Laser Cutting FMEA and Control Plans 3
Fender1 PPAP-PSW Accuracy Concern - Laser Cut Holes In Formed Fabricated Steel Part APQP and PPAP 15
E Laser Marking effects on the Fatigue Strength of Alloys CE Marking (Conformité Européene) / CB Scheme 6
J IEC60825 - Laser Safety - Calculating Maximum Permissible Exposure Correctly Other ISO and International Standards and European Regulations 1
R How to determine Failure Tolerance Time of Laser Equipment? IEC 60601 - Medical Electrical Equipment Safety Standards Series 27
H Laser Etching on Stainless Steel Knobs - Quality Issue Manufacturing and Related Processes 17
P 400 micron Difference between CMM Results and Laser Tracker Results General Measurement Device and Calibration Topics 7
D FMEA for Laser Cutting of Die Cast parts in AM60B Magnesium FMEA and Control Plans 1

Similar threads

Top Bottom