Linkage of ISO 9001:2000, ISO/TS16949 and Lean Manufacturing

A

amr1234

#1
It is my opinion from observations that there is a close relationship between ISO 9001:2000, ISO/TS16949 and Lean Manufacturing. Was I only dreaming it? I'd like someone elses take on it?


:magic:
 
Elsmar Forum Sponsor

cncmarine

Quite Involved in Discussions
#2
Please share with me the similarities between ISO and Lean?

I don't see it.

ISO and TS.....yes of course. ISO is the baseline and TS is just adding the specifcs to the automotive industry. (great system)
 

pga_gold

Involved - Posts
#3
There is a note to clause 6.3.1 (Plant, facility, and equipment planning) that states, "These requirements SHOULD focus on lean manufacturing principles..." I think we all know, if the standard says something "SHOULD" be done then auditors will look for it. Good pick up AMR1234, the TS Standard does indeed incorporate Lean principles.
 
A

amr1234

#4
Perhaps the use of word linkage is incorrectly applied. Perhaps, tools and building blocks would be more appropriate. To me, ISO/TS16949 is complimented by Lean Manufacturing, or visa versa. :bonk:
 

cncmarine

Quite Involved in Discussions
#5
pga_gold said:
There is a note to clause 6.3.1 (Plant, facility, and equipment planning) that states, "These requirements SHOULD focus on lean manufacturing principles..." I think we all know, if the standard says something "SHOULD" be done then auditors will look for it. Good pick up AMR1234, the TS Standard does indeed incorporate Lean principles.

6.3.1 in the 9001:2000 standard ?
 

cncmarine

Quite Involved in Discussions
#6
lean vs ISO

9001:2000 = conformity to requirements
Lean = deliver value at the least cost

ISO procedures, audits, and all the other documentation = NON VALUE

TS and ISO are going in the right directions. The supplier 8D is a great system used in lean and TS. The focus on processes in the 9001:2000 is part process mapping.
 

cncmarine

Quite Involved in Discussions
#8
pga_gold said:
No...6.3.1 in TS 16949. It is a supplement to ISO 9k2k.
yes I know. I passed a registartion audit last month.

But I thought the question was also about ISO 9001:2000, maybe I was wrong. ,
 

The Taz!

Quite Involved in Discussions
#9
I think there is a more subtle reference also. . . process efficiency. ISO and TS both are looking at process efficiency, and you can use an extention of that to look at all processes not just manufacturing. The ultimate goal is customer satisfaction. . . leaning out a manufacturing process creating a larger margin will allow for cost cutting in the supply chain. THAT is really the stealth goal there.

The techniques can be applied in a variety of ways.
 

pga_gold

Involved - Posts
#10
cncmarine said:
yes I know. I passed a registartion audit last month.

I certainly didn't mean to talk down to you. If you took it that way, I apologize.

But I thought the question was also about ISO 9001:2000, maybe I was wrong. ,
The title of the thread was for all three: "Linkage of ISO 9001:2000, ISO/TS 16949 and Lean Manufacturing"
 
Thread starter Similar threads Forum Replies Date
Proud Liberal DFMEA / PFMEA linkage - Where in the standards do I find it? FMEA and Control Plans 5
J SC and the linkage between CP and PFMEA ? When it?s being produced or controlled? IATF 16949 - Automotive Quality Systems Standard 4
M Process Flow Diagram -> PFMEA -> Control Plan Linkage IATF 16949 - Automotive Quality Systems Standard 17
R FMEA and Control Plan Linkage FMEA and Control Plans 3
M CSR (Customer Specific Requirements) linkage to IQA process IATF 16949 - Automotive Quality Systems Standard 6
S Should Identified Hazards and Risks necessarily have Linkage with Legal Requirements? Occupational Health & Safety Management Standards 8
M DFMEA and its linkage to Design Verification FMEA and Control Plans 1
R Change Control Linkage to Deviation System Nonconformance and Corrective Action 7
M Linkage of Internal Audit Observations to Business Risk ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
T Sarbanes Oxley Act (SOX) linkage to a documented QMS - Detailed Procedures Required? Document Control Systems, Procedures, Forms and Templates 21
G Forms have no linkage to procedures or instructions - How to address? Document Control Systems, Procedures, Forms and Templates 9
A How to establish linkage between specs/control plan/FMEA/process flow? Document Control Systems, Procedures, Forms and Templates 10
C MSDS & EMS (Environmental Management System) Linkage Miscellaneous Environmental Standards and EMS Related Discussions 5
A ISO 17021-1:2015 toolkit General Auditing Discussions 1
N ISO 19011:2018 - 5.4.2 "...audit program should engage in appropriate continual development..." Training - Internal, External, Online and Distance Learning 4
P ISO 13485:2016 MDSAP Certification Fee Survey ISO 13485:2016 - Medical Device Quality Management Systems 4
A ISO 14971 PFMEA Manufacturing Risk ISO 14971 - Medical Device Risk Management 2
C SOP Template needed for ISO 13485 6.3 Infrastructure ISO 13485:2016 - Medical Device Quality Management Systems 5
T ISO 13485 8.3 - Non-Conforming Materials - on-line rework or part of process? ISO 13485:2016 - Medical Device Quality Management Systems 11
T ISO 9001 8.5.2. - Identification and traceability to Identify Outputs - Services ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
T Outsourced process in ISO 45001 Occupational Health & Safety Management Standards 2
K Overall residual risk according to ISO 14971:2019 ISO 14971 - Medical Device Risk Management 5
M Gap analysis on ISO 14971:2019 with previous revision ISO 14971 - Medical Device Risk Management 2
T ISO 9001:2015 - Small Shop ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
T ISO 17025:2017 requirement 5.7.b. about maintenance the integrity of the management system ISO 17025 related Discussions 1
M ISO 9001:2015 case study sample ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
M Sample of Nonconformity report for ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
Q ISO 9001 8.5.1 - Control of production and service performance ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
B Do IFU designs have to be document controlled under ISO 13485? Document Control Systems, Procedures, Forms and Templates 2
H ISO 13485 - Separate Microbiology Audits ISO 13485:2016 - Medical Device Quality Management Systems 3
M Case study help as per ISO 9001: 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 17
M Case study solution help required as per ISO 9001 : 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
C Production and Post Production feedback - ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 4
T ISO 13485 - 5.5.1 Responsibility and authority - Small Company Independence ISO 13485:2016 - Medical Device Quality Management Systems 13
A Refusal to discuss ISO 9001 obligations... what to do? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
A What does this sentence "this symbol shall be used in the orientation shown" mean in ISO 780:2015? Other Medical Device Related Standards 4
B Can we be ISO 9001 certified without a physical office? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
D Test summary report example for design validation wanted - ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 1
J Informational ISO 24971:2020 Released ISO 14971 - Medical Device Risk Management 0
S ISO 45001 and outsourcing the transporation of products Occupational Health & Safety Management Standards 3
S Documenting Design Verification Test Results (ISO 9001) Design and Development of Products and Processes 1
A Question on ISO 14001:2015 - Are annual audits required? ISO 14001:2015 Specific Discussions 8
N Which EN ISO 17664 version compliance to EU MDR? Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 3
Sidney Vianna Informational New edition of ISO 29001 released (June 2020) Oil and Gas Industry Standards and Regulations 0
R Who is the customer in the ISO/IEC 17025:2017? ISO 17025 related Discussions 1
T ISO 13485 - Process validation at critical suppliers ISO 13485:2016 - Medical Device Quality Management Systems 7
L Combining 3 ISO 9001 registrations into 1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
M Risk Analysis Flow - Confusion between ISO 14971 and IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 8
C Compliance with ISO 17025 requirement 8.4.2 - Controls - Records recovery ISO 17025 related Discussions 4
N EN ISO 13640:2002 vs EN ISO 23640:2011 Other Medical Device Related Standards 1
Similar threads


















































Top Bottom