Looking for A Non-Destructive Crimp Test method to replace Pull Test

S

s0rr0w

#1
Hi,

At the moment I'm using crimp height measurement & pull test to control crimp processes. I'm looking for method/test which can replace pull test - a non destructive test. My goal is to decrease scrap level during crimp quality controlling.

I heard something about voltage drop test for crimped connections. I'd like to know if this method can be used on the production floor as well as pull test.

I also would like to know if there's any company, which provides such a solution - portable voltage drop testers?
 
Elsmar Forum Sponsor
#2
Re: Non destructive crimp tests

Hi,

At the moment I'm using crimp height measurement & pull test to control crimp processes. I'm looking for method/test which can replace pull test - a non destructive test. My goal is to decrease scrap level during crimp quality controlling.

I heard something about voltage drop test for crimped connections. I'd like to know if this method can be used on the production floor as well as pull test.

I also would like to know if there's any company, which provides such a solution - portable voltage drop testers?
Find all that you require and more about crimping HERE and HERE
 

Steve Prevette

Deming Disciple
Leader
Super Moderator
#3
I'm not an electronics expert, but do deal with it as a hobbyist. Are these leads with crimped connections on both ends, or is one end permanently connected to equipment?

I'd make a test box that you connect one (or both) ends into, and then it sends voltage (or control signals) along the lead and checks for response of the equipment or continuity on the wire.

Some sort of calibrated puller could probably be rigged up so it only pulls to the strength that is required to see that the plug won't pull off, but won't damage the plug if it is a good plug.
 
Thread starter Similar threads Forum Replies Date
C Looking for RED ESD Bags that preferably say NON-CONFORMING Manufacturing and Related Processes 5
A Definition Major Non-conformance and Non-conformance - Looking for official definitions Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 15
R Non conforming product control for services - Looking for ideas and suggestions 8.3 Service Industry Specific Topics 4
T Looking for Examples of Non-Creditable, Non-Returnable Forms (NCNR) Document Control Systems, Procedures, Forms and Templates 1
P Looking for Korean FDA Drug Master File requirements for packaging systems. Other Medical Device and Orthopedic Related Topics 1
bryan willemot Looking for NADCAP audit Excel spreadsheets template for vendors, specifically heat treat (Vacuum Furnace) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
Kevin Walters AATT Course - Looking for pointers AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
L Looking for SOP Template for UDI under MDR EU Medical Device Regulations 4
C Supplier Audit - Looking for a quality audit checklist General Auditing Discussions 3
H Looking at options... Misc. Quality Assurance and Business Systems Related Topics 6
R Looking for ISO 13485 Internal Audit Checklist ISO 13485:2016 - Medical Device Quality Management Systems 8
K Looking for a tape to perform cross hatch test on powder coating parts Reliability Analysis - Predictions, Testing and Standards 3
M Looking for Navy Instruction OD32193 or OD32190 Various Other Specifications, Standards, and related Requirements 4
P Looking for help with an Ansys Workbench problem Manufacturing and Related Processes 0
X Looking for 17025 auditor to perform internal audit on IT software testing laboratory ISO 17025 related Discussions 3
Ed Panek Looking for Test Resource General Measurement Device and Calibration Topics 1
M RAPS RAC Device - Looking for resources / prep materials & study group Professional Certifications and Degrees 7
S Looking to find a pharmaceutical manufacturer that would be interested in buying or licensing a USDA 510k clearance General Information Resources 4
Anerol C Looking for sorting services at Singapore Career and Occupation Discussions 2
K AS9100 - Looking for advice on how to become a CB Auditor AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
G Medical Device Auditor (CMDA) certification exam by ASQ - looking for input Career and Occupation Discussions 3
R Looking for an efficient contract management solution Contract Review Process 1
K Design History File - Looking for Examples of DHF's. 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
P Looking to outsource Internal Audit - MDSAP competent auditor needed Other Medical Device Regulations World-Wide 9
Q Measurement Equipment Revocation - Looking for a Disposal Form with Risk Assessment IATF 16949 - Automotive Quality Systems Standard 10
B Looking for SSCP file of IVD devices EU Medical Device Regulations 7
M Looking for a copy of ISO 10651 Hospitals, Clinics & other Health Care Providers 6
Azaarus Looking for important points regarding First Piece Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
L Looking for Control Plan and FMEA Stamping process FMEA and Control Plans 2
Q Looking for a 5S tracking database Problem Solving, Root Cause Fault and Failure Analysis 4
N Looking for a recommendation for an EU MDR Importer EU Medical Device Regulations 1
K Technical file for MHRA - looking for assistance with self declaration Class I device CE Marking (Conformité Européene) / CB Scheme 8
bryan willemot Looking for an Approved vendors list template Document Control Systems, Procedures, Forms and Templates 11
C RA (Regulatory Assurance) Training (FDA) looking for resources Training - Internal, External, Online and Distance Learning 5
M Data Protection and Privacy Policy - looking for a template/example EU Medical Device Regulations 1
M 'Active' device? Software/laptop with attached camera 'looking' at passive metal probe EU Medical Device Regulations 3
K Looking for guidance to write an SOP on Statistical Methodologies? Statistical Analysis Tools, Techniques and SPC 7
blackholequasar Looking into Nadcap for the first time AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
A 21 CFR 820 - Risk Management - Looking for some guidance US Food and Drug Administration (FDA) 3
S We are looking for EU authorised Representative for both Class I and Class IIb devices EU Medical Device Regulations 7
K Looking for a job as Quality Engineer Career and Occupation Discussions 3
B Looking for 10 Internal Audit Online Training Participants ISO 17025 related Discussions 2
M We are looking for a Contract Manufacturer US Food and Drug Administration (FDA) 2
mihzago Looking for an Australian/ NZ Sponsor Other Medical Device Regulations World-Wide 4
S New Foreign Exporter Looking 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 0
N Looking to Impress - New Job - Advice, Thoughts, Comments Welcome Career and Occupation Discussions 23
J Looking for a training organization that can provide in house DFMEA training FMEA and Control Plans 4
A Looking for a third party to calibrate our measure equipment - South Carolina General Measurement Device and Calibration Topics 6
S Looking for Quality Content to Build Medical Device Curriculum - Concept to Commercialization Training - Internal, External, Online and Distance Learning 4
N Looking for Gamma sterilization facility in China ISO 13485:2016 - Medical Device Quality Management Systems 4

Similar threads

Top Bottom