Looking for good CMM Training

M

mboucher

#11
There are several great resources on the web

CMM Quarterly - a e-zine for CMM / Vision programmers
CMMTalk - a forum based web site covering all cmm softwares
CMMGuy - a forum based web site covering all cmm softwares

These are great tools in learning how to use your cmm(s)

Mark
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#12
There are several great resources on the web
NOTE: In the future, when recommending a site or publication (or whatever) that you have a vested interest in, please state your affiliation with the resources you are recommending as required by the TOS here.

Please read the Elsmar Cove Forum TOS

These are the Elsmar Cove Forum Policies

Thanks!

3. POSTS BY VENDORS AND CONSULTANTS - COMMERCIAL POSTS

b. If you are in any way, financially or other wise, 'related' to a product or company under discussion, it is required that you state your relationship. Feel free to respond to questions but let us know if you are 'related'. HOWEVER - We want content in the forums, not just a referral to your web site or products or services. If you want to post an outright advertisement, have a product to sell, a demo or whatever, please call or e-mail Marc Smith to discuss. Advertising Information.

c. Products or services you may be associated with, along with a link to your company's web site, can be detailed in your User Profile. As you interact with the community, folks will naturally look at the profile and see your information. If there's something specific you think your product or service can help with, please give a detailed explanation and then refer people to your profile for information. Please help in the post rather than to just say you have a product which will 'cure all'... A simple statement that your product will solve someone's problem is not sufficient. Your web site url, telephone number, company name and your product can be put in your Profile. They are not allowed in posts you make. **If you post a simple "My product will help you" type of post, expect the post to be deleted or heavily edited.
 
M

mboucher

#13
Thank you Marc,

Yes I publish CMM Quarterly and I will add that affiliation in any future post. The other sites are sites that I have no affiliation with other than a user/ contributor.

Thanks,

Mark Boucher
 
T

True Position

#14
No offense, but I've found cmmtalk completely worthless. The general forum has had 8 posts in 2 months, 3 of them from you, 2 of those trying to drum up sales, 1 another person trying to advertise. No posts in the Zeiss hardware forum in 3 months. The place seems mostly dead.

The software specific forums most of the manufacturers offer are much better, I've heard nothing but praise of the DC DMIS User Forum and I've had good luck myself with the Zeiss IMT Calypso forums. I hear the German Calypso forums are really excellent, sadly I do not speak it.
 

CarolX

Super Moderator
Super Moderator
#15
No offense, but I've found cmmtalk completely worthless. The general forum has had 8 posts in 2 months, 3 of them from you, 2 of those trying to drum up sales, 1 another person trying to advertise. No posts in the Zeiss hardware forum in 3 months. The place seems mostly dead.

The software specific forums most of the manufacturers offer are much better, I've heard nothing but praise of the DC DMIS User Forum and I've had good luck myself with the Zeiss IMT Calypso forums. I hear the German Calypso forums are really excellent, sadly I do not speak it.
Hawat - I agree - I haven't looked at cmmtalk in a while - it wasn't real useful last time I looked. PC-DMIS site is good for those using that system (it gets a little rough there, sometimes). Thanks for your input!
 
J

justncredible

#16
I think it is from the fact people have less problems with the zeiss softeware.

I do use the pc-dmis forums and it is great fun, we rant about politics and all the taboo topics. Also if you have a question on the zeiss stuff alot of them including me have used zeiss in the past some still use it.
 
M

mboucher

#17
There is one more site run by Mike York called CMM Programmers at cmmprogrammers.com and is a neutral site not a OEM software dominant forum.

Mark Boucher
 
Thread starter Similar threads Forum Replies Date
B CMM Software Package? Looking for recomendations on PCDMIS CAD v3.7mr1 General Measurement Device and Calibration Topics 1
J Looking for partners Paid Consulting, Training and Services 2
bryan willemot Looking for an Approved vendors list template Document Control Systems, Procedures, Forms and Templates 11
C RA (Regulatory Assurance) Training (FDA) looking for resources Training - Internal, External, Online and Distance Learning 5
M Data Protection and Privacy Policy - looking for a template/example EU Medical Device Regulations 1
M 'Active' device? Software/laptop with attached camera 'looking' at passive metal probe EU Medical Device Regulations 3
K Looking for guidance to write an SOP on Statistical Methodologies? Statistical Analysis Tools, Techniques and SPC 7
blackholequasar Looking into Nadcap for the first time AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
A 21 CFR 820 - Risk Management - Looking for some guidance US Food and Drug Administration (FDA) 3
S We are looking for EU authorised Representative for both Class I and Class IIb devices EU Medical Device Regulations 7
K Looking for a job as Quality Engineer Career and Occupation Discussions 2
B Looking for 10 Internal Audit Online Training Participants ISO 17025 related Discussions 2
M We are looking for a Contract Manufacturer US Food and Drug Administration (FDA) 2
mihzago Looking for an Australian/ NZ Sponsor Other Medical Device Regulations World-Wide 4
S New Foreign Exporter Looking 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 0
N Looking to Impress - New Job - Advice, Thoughts, Comments Welcome Career and Occupation Discussions 23
J Looking for a training organization that can provide in house DFMEA training FMEA and Control Plans 4
A Looking for a third party to calibrate our measure equipment - South Carolina General Measurement Device and Calibration Topics 6
S Looking for Quality Content to Build Medical Device Curriculum - Concept to Commercialization Training - Internal, External, Online and Distance Learning 4
N Looking for Gamma sterilization facility in China ISO 13485:2016 - Medical Device Quality Management Systems 4
A 5 x 5 Risk Matrix - Looking for a good example Manufacturing and Related Processes 2
M Looking for a Presentation on Design for Excellence (DfX) Manufacturing and Related Processes 2
J Looking for a EU MDR Gap Analysis template EU Medical Device Regulations 6
J Looking for a template SOP for UDI implementation for EU Medical Devices EU Medical Device Regulations 1
A New to QC, looking for resources Problem Solving, Root Cause Fault and Failure Analysis 3
bryan willemot Looking for a certified test report for aerospace parts AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
K I’m looking for a square probe for my linear height gauge Manufacturing and Related Processes 1
C Looking for China Good manufacturing practice China Medical Device Regulations 1
M Is Harmonised EN 1041 (Information Supplied By Manufacturer) Worth Looking At? EU Medical Device Regulations 7
DuncanGibbons Looking for example aerospace part CAD files to be used for a case study Career and Occupation Discussions 2
A We're currently looking for any studies performed on various PPE materials Qualification and Validation (including 21 CFR Part 11) 1
C Looking for APQP Training recommendations preferably in the aerospace industry APQP and PPAP 2
M Looking for third party reviewers for FDA submissions US Food and Drug Administration (FDA) 2
C Looking for simple Software Validation IQ templates. Qualification and Validation (including 21 CFR Part 11) 4
H Looking for Tips on finding an IATF consultant Consultants and Consulting 6
W My company is looking to start a materials testing lab that conforms to ISO17025:2017 ISO 17025 related Discussions 3
pashah Looking for Usability File Template acc. IEC 62366-1 and IEC 60601-1-6 IEC 62366 - Medical Device Usability Engineering 4
pashah Looking for Clinical Evaluation SOP acc. MEDDEV and EU MDR Other Medical Device Related Standards 1
bryan willemot Looking for a good CoC to put with my certification sheets when we send parts Document Control Systems, Procedures, Forms and Templates 1
L I'm looking for Translation Procedure Guide MEDDEV 2.5/5 Rev.2 (NOT Rev.3) CE Marking (Conformité Européene) / CB Scheme 0
K Looking for a good Six Sigma book Six Sigma 7
G Looking to move to an electronic QMS software Software Quality Assurance 11
C Looking for source of silicone contamination in ISO Class 8 Cleanroom Other Medical Device Related Standards 2
F Looking for a Japan MAH recommendation that is not too expensive Japan Medical Device Regulations 6
P Looking for Risk Assessment Template - Not necessarily Asset based IEC 27001 - Information Security Management Systems (ISMS) 1
S Looking for procedure on UDI (Unique Device Identification) 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
J Looking for FMEA plastic injection molding FMEA and Control Plans 8
M Start-Up Company looking for ISO 13485 Certification Body and Medical Device CE Mark Notified Body Registrars and Notified Bodies 6
N Looking for input on the attached Process / IATF 16949 Clause Matrix IATF 16949 - Automotive Quality Systems Standard 4
Ajit Basrur Looking for a Design Transfer Checklist 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2

Similar threads

Top Bottom