Looking for information about StressTel Ultrasonic Gages

Q

Quality-Geek

#1
I'm in the process of getting quotes for an ultrasonic thickness gage. We will use this gage to verify the thickness of the steel we purchase (coils). One of the gages I'm looking at is the PocketMIKE by StressTel. It looks like a good tool, appropriate for our purpose, and the price is better than the other options I'm looking at. However, I've never heard of StressTel. All I know is that they are part of GE Inspection Technologies, which also bought out Krautkramer.

Does anyone know anything about the quality of StressTel's products? Are there other websites I can search that can give me more information?

Note: I'm not sure I put this in the correct forum. I apologize if this creates any problems.

Thanks!!
Bekki
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
I'm in the process of getting quotes for an ultrasonic thickness gage. We will use this gage to verify the thickness of the steel we purchase (coils). One of the gages I'm looking at is the PocketMIKE by StressTel. It looks like a good tool, appropriate for our purpose, and the price is better than the other options I'm looking at. However, I've never heard of StressTel. All I know is that they are part of GE Inspection Technologies, which also bought out Krautkramer.

Does anyone know anything about the quality of StressTel's products? Are there other websites I can search that can give me more information?

Note: I'm not sure I put this in the correct forum. I apologize if this creates any problems.

Thanks!!
Bekki
Can someone help Bekki?

Thank you!!

Stijloor.
 

Stijloor

Staff member
Super Moderator
#3
I'm in the process of getting quotes for an ultrasonic thickness gage. We will use this gage to verify the thickness of the steel we purchase (coils). One of the gages I'm looking at is the PocketMIKE by StressTel. It looks like a good tool, appropriate for our purpose, and the price is better than the other options I'm looking at. However, I've never heard of StressTel. All I know is that they are part of GE Inspection Technologies, which also bought out Krautkramer.

Does anyone know anything about the quality of StressTel's products? Are there other websites I can search that can give me more information?

Note: I'm not sure I put this in the correct forum. I apologize if this creates any problems.

Thanks!!
Bekki
Bump.

Suggestions anyone?

Thank you!!

Stijloor.
 
Thread starter Similar threads Forum Replies Date
M Is Harmonised EN 1041 (Information Supplied By Manufacturer) Worth Looking At? EU Medical Device Regulations 7
Z Looking for ISO 9001:2015 Information ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
T Information System Security (infosec) Incident Form - Looking for samples IEC 27001 - Information Security Management Systems (ISMS) 4
G SEMI S2-0706a - Looking for general information Miscellaneous Environmental Standards and EMS Related Discussions 1
ScottK Looking for some information on Kosher certification (for a mouthwash) Various Other Specifications, Standards, and related Requirements 10
netwizard Looking for an ISO 9001:2000 Internal Audit Checklist - UOP (Information Technology) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
S Looking for Information on Lean Accounting Lean in Manufacturing and Service Industries 4
C Calibration Engineer - Looking for information to develop a job description General Measurement Device and Calibration Topics 2
S Looking for information on U-Charts - Semi-conductor equipment manufacturer Statistical Analysis Tools, Techniques and SPC 6
D Looking for information on Ford 5 Phase Customer and Company Specific Requirements 7
Marc Kaizan - Kaizen - Looking for information on setting up a Kaizan system Misc. Quality Assurance and Business Systems Related Topics 5
CarolX I am looking for some information on stud welding Manufacturing and Related Processes 28
D Looking for information on calibration proficiency testing (dimensional) Training - Internal, External, Online and Distance Learning 1
S Mistake Proofing and Poka Yoke - Looking for information Quality Tools, Improvement and Analysis 2
J Looking for partners Paid Consulting, Training and Services 2
bryan willemot Looking for an Approved vendors list template Document Control Systems, Procedures, Forms and Templates 11
C RA (Regulatory Assurance) Training (FDA) looking for resources Training - Internal, External, Online and Distance Learning 5
M Data Protection and Privacy Policy - looking for a template/example EU Medical Device Regulations 1
M 'Active' device? Software/laptop with attached camera 'looking' at passive metal probe EU Medical Device Regulations 3
K Looking for guidance to write an SOP on Statistical Methodologies? Statistical Analysis Tools, Techniques and SPC 7
blackholequasar Looking into Nadcap for the first time AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
A 21 CFR 820 - Risk Management - Looking for some guidance US Food and Drug Administration (FDA) 3
S We are looking for EU authorised Representative for both Class I and Class IIb devices EU Medical Device Regulations 7
K Looking for a job as Quality Engineer Career and Occupation Discussions 2
B Looking for 10 Internal Audit Online Training Participants ISO 17025 related Discussions 2
M We are looking for a Contract Manufacturer US Food and Drug Administration (FDA) 2
mihzago Looking for an Australian/ NZ Sponsor Other Medical Device Regulations World-Wide 4
S New Foreign Exporter Looking 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 0
N Looking to Impress - New Job - Advice, Thoughts, Comments Welcome Career and Occupation Discussions 23
J Looking for a training organization that can provide in house DFMEA training FMEA and Control Plans 4
A Looking for a third party to calibrate our measure equipment - South Carolina General Measurement Device and Calibration Topics 6
S Looking for Quality Content to Build Medical Device Curriculum - Concept to Commercialization Training - Internal, External, Online and Distance Learning 4
N Looking for Gamma sterilization facility in China ISO 13485:2016 - Medical Device Quality Management Systems 4
A 5 x 5 Risk Matrix - Looking for a good example Manufacturing and Related Processes 2
M Looking for a Presentation on Design for Excellence (DfX) Manufacturing and Related Processes 2
J Looking for a EU MDR Gap Analysis template EU Medical Device Regulations 6
J Looking for a template SOP for UDI implementation for EU Medical Devices EU Medical Device Regulations 1
A New to QC, looking for resources Problem Solving, Root Cause Fault and Failure Analysis 3
bryan willemot Looking for a certified test report for aerospace parts AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
K I’m looking for a square probe for my linear height gauge Manufacturing and Related Processes 1
C Looking for China Good manufacturing practice China Medical Device Regulations 1
DuncanGibbons Looking for example aerospace part CAD files to be used for a case study Career and Occupation Discussions 2
A We're currently looking for any studies performed on various PPE materials Qualification and Validation (including 21 CFR Part 11) 1
C Looking for APQP Training recommendations preferably in the aerospace industry APQP and PPAP 2
M Looking for third party reviewers for FDA submissions US Food and Drug Administration (FDA) 2
C Looking for simple Software Validation IQ templates. Qualification and Validation (including 21 CFR Part 11) 4
H Looking for Tips on finding an IATF consultant Consultants and Consulting 6
W My company is looking to start a materials testing lab that conforms to ISO17025:2017 ISO 17025 related Discussions 3
pashah Looking for Usability File Template acc. IEC 62366-1 and IEC 60601-1-6 IEC 62366 - Medical Device Usability Engineering 4
pashah Looking for Clinical Evaluation SOP acc. MEDDEV and EU MDR Other Medical Device Related Standards 1

Similar threads

Top Bottom