Looking for Printed Control Chart blanks

D

David Mullins

#1
Posted by Melissa on February 14, 2000 at 13:16:33:
On behalf of Melissa of Pennsylvania.

"I'm looking for a place to buy blank, pre-printed control charts (like you use for X-bar & R). I know we used to buy them long ago, but I can't seem to find anywhere that has them now. Any leads or suggestions would be helpful.

Thanks.

Melissa"

Can you all advise where these can be purchased in the US?
 
Elsmar Forum Sponsor
G

Gerry A. Sherman

#3
Control chart forms are easily made in any word processing program such as Word or Wordperfect using tables. You can also customize them that way. If you post an email address, I can send you some files I made to save you time. You can email me at [email protected]

[This message has been edited by Gerry A. Sherman (edited 17 February 2000).]
 

Marc

Fully vaccinated are you?
Staff member
Admin
#4
If you don't mind making it 'public property' e-mail me a 'copy' and I'll post it in the pdf_files directory.
 
D

David Mullins

#5
I forwarded your info to Melissa, and received the following response:

"You know, I called them the other day and the woman I was talking with
said she couldn't find them listed anywhere. When I got your e-mail, I
figured she had to be wrong. I should have gone with my first instincts
because I just ordered them on-line. Thanks for your help!"

Thanks all, another happy shopper!
I'll forward Gerry's offer to her.
David.

------------------
 
B

Batman

#6
May I add a couple of particulars to "in-house" SPC charts.

When you have decided on a format, take one out on the floor and see if it works. We started out years ago with 81/2 x 11, finally went to 11 x 17. The operators needed the room to write info like tool changes, lot changes, adjustments, etc.

Give it a form number. There are three reason for this:
1&2)You may develop a couple of different charts, moving range, 4 cavity - 8 cavity, etc. This way your document controller can keep track of revisions and versions.

3)You may discover that it is cheaper to send each version of type of chart out to a local offset printer. Having a form number on each will facilitate re-ordering.

Just a couple of suggestions.
 
Thread starter Similar threads Forum Replies Date
Q Measurement Equipment Revocation - Looking for a Disposal Form with Risk Assessment IATF 16949 - Automotive Quality Systems Standard 10
B Looking for SSCP file of IVD devices EU Medical Device Regulations 7
M Looking for a copy of ISO 10651 Hospitals, Clinics & other Health Care Providers 6
Azaarus Looking for important points regarding First Piece Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
L Looking for Control Plan and FMEA Stamping process FMEA and Control Plans 2
Q Looking for a 5S tracking database Problem Solving, Root Cause Fault and Failure Analysis 4
N Looking for a recommendation for an EU MDR Importer EU Medical Device Regulations 1
K Technical file for MHRA - looking for assistance with self declaration Class I device CE Marking (Conformité Européene) / CB Scheme 8
J Looking for partners Paid Consulting, Training and Services 2
bryan willemot Looking for an Approved vendors list template Document Control Systems, Procedures, Forms and Templates 11
C RA (Regulatory Assurance) Training (FDA) looking for resources Training - Internal, External, Online and Distance Learning 5
M Data Protection and Privacy Policy - looking for a template/example EU Medical Device Regulations 1
M 'Active' device? Software/laptop with attached camera 'looking' at passive metal probe EU Medical Device Regulations 3
K Looking for guidance to write an SOP on Statistical Methodologies? Statistical Analysis Tools, Techniques and SPC 7
blackholequasar Looking into Nadcap for the first time AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
A 21 CFR 820 - Risk Management - Looking for some guidance US Food and Drug Administration (FDA) 3
S We are looking for EU authorised Representative for both Class I and Class IIb devices EU Medical Device Regulations 7
K Looking for a job as Quality Engineer Career and Occupation Discussions 3
B Looking for 10 Internal Audit Online Training Participants ISO 17025 related Discussions 2
M We are looking for a Contract Manufacturer US Food and Drug Administration (FDA) 2
mihzago Looking for an Australian/ NZ Sponsor Other Medical Device Regulations World-Wide 4
S New Foreign Exporter Looking 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 0
N Looking to Impress - New Job - Advice, Thoughts, Comments Welcome Career and Occupation Discussions 23
J Looking for a training organization that can provide in house DFMEA training FMEA and Control Plans 4
A Looking for a third party to calibrate our measure equipment - South Carolina General Measurement Device and Calibration Topics 6
S Looking for Quality Content to Build Medical Device Curriculum - Concept to Commercialization Training - Internal, External, Online and Distance Learning 4
N Looking for Gamma sterilization facility in China ISO 13485:2016 - Medical Device Quality Management Systems 4
A 5 x 5 Risk Matrix - Looking for a good example Manufacturing and Related Processes 2
M Looking for a Presentation on Design for Excellence (DfX) Manufacturing and Related Processes 2
J Looking for a EU MDR Gap Analysis template EU Medical Device Regulations 6
J Looking for a template SOP for UDI implementation for EU Medical Devices EU Medical Device Regulations 1
A New to QC, looking for resources Problem Solving, Root Cause Fault and Failure Analysis 3
bryan willemot Looking for a certified test report for aerospace parts AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
K I’m looking for a square probe for my linear height gauge Manufacturing and Related Processes 1
C Looking for China Good manufacturing practice China Medical Device Regulations 1
M Is Harmonised EN 1041 (Information Supplied By Manufacturer) Worth Looking At? EU Medical Device Regulations 7
DuncanGibbons Looking for example aerospace part CAD files to be used for a case study Career and Occupation Discussions 2
A We're currently looking for any studies performed on various PPE materials Qualification and Validation (including 21 CFR Part 11) 1
C Looking for APQP Training recommendations preferably in the aerospace industry APQP and PPAP 2
M Looking for third party reviewers for FDA submissions US Food and Drug Administration (FDA) 2
C Looking for simple Software Validation IQ templates. Qualification and Validation (including 21 CFR Part 11) 4
H Looking for Tips on finding an IATF consultant Consultants and Consulting 6
W My company is looking to start a materials testing lab that conforms to ISO17025:2017 ISO 17025 related Discussions 3
pashah Looking for Usability File Template acc. IEC 62366-1 and IEC 60601-1-6 IEC 62366 - Medical Device Usability Engineering 4
pashah Looking for Clinical Evaluation SOP acc. MEDDEV and EU MDR Other Medical Device Related Standards 1
bryan willemot Looking for a good CoC to put with my certification sheets when we send parts Document Control Systems, Procedures, Forms and Templates 1
L I'm looking for Translation Procedure Guide MEDDEV 2.5/5 Rev.2 (NOT Rev.3) CE Marking (Conformité Européene) / CB Scheme 0
K Looking for a good Six Sigma book Six Sigma 7
G Looking to move to an electronic QMS software Software Quality Assurance 11
C Looking for source of silicone contamination in ISO Class 8 Cleanroom Other Medical Device Related Standards 2

Similar threads

Top Bottom