Looking for Testing facility to do testing of x ray sensors for us

J

Jennifer27

#1
Dear Experts,

We have submitted a 510k submission for x ray sensors. FDA has gotten back to us and is asking for bench testing. We need someone who can execute the testing for us.

Please let me if you can perform testing for us, or if you would recommend someone who might have experience with radio logical devices like the x ray sensors. We are located in Arizona, USA, and would prefer US based test facilities.

Eagerly waiting for your response,
Best,
Jen
 
Elsmar Forum Sponsor

somashekar

Staff member
Admin
#2
Re: Looking for Testing facility to do testing for us

Check with UL at Arizona:

7826 East Evans Road
Scottsdale, AZ 85260
U.S.A.
Customer Service: 877.UL.HELPS (877.854.3577)
Tel: 480.991.9260
Email: [email protected]
 
Thread starter Similar threads Forum Replies Date
W My company is looking to start a materials testing lab that conforms to ISO17025:2017 ISO 17025 related Discussions 3
C Looking for Testing Laboratory for Aluminum Products - CE Marking General Measurement Device and Calibration Topics 5
A Medical Device Design Verification Testing - Is ISO 62366:2008 what I'm looking for? IEC 62366 - Medical Device Usability Engineering 16
O I am looking for a US laboratory that can perform ISO 1628-4 testing Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
P Looking for my testing Lab to be accredited under iso 17025 - Definitions ISO 17025 related Discussions 5
S Looking for an accredited 17025 lab to do heat age testing on automotive fabrics ISO 17025 related Discussions 3
D Looking for 100% sort testing equipment for overall length, flatness, and parallelism General Measurement Device and Calibration Topics 1
D Looking for information on calibration proficiency testing (dimensional) Training - Internal, External, Online and Distance Learning 1
G Medical Device Auditor (CMDA) certification exam by ASQ - looking for input Career and Occupation Discussions 3
R Looking for an efficient contract management solution Contract Review Process 1
K Design History File - Looking for Examples of DHF's. 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
P Looking to outsource Internal Audit - MDSAP competent auditor needed Other Medical Device Regulations World-Wide 9
Q Measurement Equipment Revocation - Looking for a Disposal Form with Risk Assessment IATF 16949 - Automotive Quality Systems Standard 10
B Looking for SSCP file of IVD devices EU Medical Device Regulations 7
M Looking for a copy of ISO 10651 Hospitals, Clinics & other Health Care Providers 6
Azaarus Looking for important points regarding First Piece Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
L Looking for Control Plan and FMEA Stamping process FMEA and Control Plans 2
Q Looking for a 5S tracking database Problem Solving, Root Cause Fault and Failure Analysis 4
N Looking for a recommendation for an EU MDR Importer EU Medical Device Regulations 1
K Technical file for MHRA - looking for assistance with self declaration Class I device CE Marking (Conformité Européene) / CB Scheme 8
J Looking for partners Paid Consulting, Training and Services 2
bryan willemot Looking for an Approved vendors list template Document Control Systems, Procedures, Forms and Templates 11
C RA (Regulatory Assurance) Training (FDA) looking for resources Training - Internal, External, Online and Distance Learning 5
M Data Protection and Privacy Policy - looking for a template/example EU Medical Device Regulations 1
M 'Active' device? Software/laptop with attached camera 'looking' at passive metal probe EU Medical Device Regulations 3
K Looking for guidance to write an SOP on Statistical Methodologies? Statistical Analysis Tools, Techniques and SPC 7
blackholequasar Looking into Nadcap for the first time AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
A 21 CFR 820 - Risk Management - Looking for some guidance US Food and Drug Administration (FDA) 3
S We are looking for EU authorised Representative for both Class I and Class IIb devices EU Medical Device Regulations 7
K Looking for a job as Quality Engineer Career and Occupation Discussions 3
B Looking for 10 Internal Audit Online Training Participants ISO 17025 related Discussions 2
M We are looking for a Contract Manufacturer US Food and Drug Administration (FDA) 2
mihzago Looking for an Australian/ NZ Sponsor Other Medical Device Regulations World-Wide 4
S New Foreign Exporter Looking 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 0
N Looking to Impress - New Job - Advice, Thoughts, Comments Welcome Career and Occupation Discussions 23
J Looking for a training organization that can provide in house DFMEA training FMEA and Control Plans 4
A Looking for a third party to calibrate our measure equipment - South Carolina General Measurement Device and Calibration Topics 6
S Looking for Quality Content to Build Medical Device Curriculum - Concept to Commercialization Training - Internal, External, Online and Distance Learning 4
N Looking for Gamma sterilization facility in China ISO 13485:2016 - Medical Device Quality Management Systems 4
A 5 x 5 Risk Matrix - Looking for a good example Manufacturing and Related Processes 2
M Looking for a Presentation on Design for Excellence (DfX) Manufacturing and Related Processes 2
J Looking for a EU MDR Gap Analysis template EU Medical Device Regulations 6
J Looking for a template SOP for UDI implementation for EU Medical Devices EU Medical Device Regulations 1
A New to QC, looking for resources Problem Solving, Root Cause Fault and Failure Analysis 3
bryan willemot Looking for a certified test report for aerospace parts AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
K I’m looking for a square probe for my linear height gauge Manufacturing and Related Processes 1
C Looking for China Good manufacturing practice China Medical Device Regulations 1
M Is Harmonised EN 1041 (Information Supplied By Manufacturer) Worth Looking At? EU Medical Device Regulations 7
DuncanGibbons Looking for example aerospace part CAD files to be used for a case study Career and Occupation Discussions 2
A We're currently looking for any studies performed on various PPE materials Qualification and Validation (including 21 CFR Part 11) 1

Similar threads

Top Bottom