SBS - The best value in QMS software

Looking for Testing Laboratory for Aluminum Products - CE Marking

C

consuleu

Starting to get Involved
#1
#1
Looking For Test Laboratory For Aluminium Products - Windows Grilles - Wind Resistance, Water Permeability, Temperature Resistance Tests Needed For the Ce Mark Initial Test.
 
QMS for Medical Device Companies
Elsmar Forum Sponsor
Marc

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#2
#2
I can't help off hand, but you should tell where you are located or in what general area you are looking for a laboratory. US? UK? EU? Asia?
 
C

consuleu

Starting to get Involved
#3
#3
Thank you for your replay Marc I am from Albania and the Lab is needed in EU or Balcan.
The products are: the aluminium windows roolling grilles.
The external aluminium sandwich doors.
 
Last edited:
C

consuleu

Starting to get Involved
#4
#4
I found the Testing Laboratory to make the initial type tests for the aluminium
products in the UK.Thank you everybody for supporting.
 
Marc

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#5
#5
What laboratory did you find? I'm relatively sure they won't mind if you name them here (free advertising).
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
O I am looking for a US laboratory that can perform ISO 1628-4 testing Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
W My company is looking to start a materials testing lab that conforms to ISO17025:2017 ISO 17025 related Discussions 3
J Looking for Testing facility to do testing of x ray sensors for us US Food and Drug Administration (FDA) 1
A Medical Device Design Verification Testing - Is ISO 62366:2008 what I'm looking for? IEC 62366 - Medical Device Usability Engineering 16
P Looking for my testing Lab to be accredited under iso 17025 - Definitions ISO 17025 related Discussions 5
S Looking for an accredited 17025 lab to do heat age testing on automotive fabrics ISO 17025 related Discussions 3
D Looking for 100% sort testing equipment for overall length, flatness, and parallelism General Measurement Device and Calibration Topics 1
D Looking for information on calibration proficiency testing (dimensional) Training - Internal, External, Online and Distance Learning 1
M 'Active' device? Software/laptop with attached camera 'looking' at passive metal probe EU Medical Device Regulations 3
K Looking for guidance to write an SOP on Statistical Methodologies? Statistical Analysis Tools, Techniques and SPC 7
blackholequasar Looking into Nadcap for the first time AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
A 21 CFR 820 - Risk Management - Looking for some guidance US Food and Drug Administration (FDA) 3
S We are looking for EU authorised Representative for both Class I and Class IIb devices EU Medical Device Regulations 7
K Looking for a job as Quality Engineer Career and Occupation Discussions 2
B Looking for 10 Internal Audit Online Training Participants ISO 17025 related Discussions 2
M We are looking for a Contract Manufacturer US Food and Drug Administration (FDA) 2
mihzago Looking for an Australian/ NZ Sponsor Other Medical Device Regulations World-Wide 0
S New Foreign Exporter Looking 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 0
N Looking to Impress - New Job - Advice, Thoughts, Comments Welcome Career and Occupation Discussions 23
J Looking for a training organization that can provide in house DFMEA training FMEA and Control Plans 4
A Looking for a third party to calibrate our measure equipment - South Carolina General Measurement Device and Calibration Topics 6
S Looking for Quality Content to Build Medical Device Curriculum - Concept to Commercialization Training - Internal, External, Online and Distance Learning 4
N Looking for Gamma sterilization facility in China ISO 13485:2016 - Medical Device Quality Management Systems 4
A 5 x 5 Risk Matrix - Looking for a good example Manufacturing and Related Processes 2
M Looking for a Presentation on Design for Excellence (DfX) Manufacturing and Related Processes 2
J Looking for a EU MDR Gap Analysis template EU Medical Device Regulations 5
J Looking for a template SOP for UDI implementation for EU Medical Devices EU Medical Device Regulations 0
A New to QC, looking for resources Problem Solving, Root Cause Fault and Failure Analysis 3
bryan willemot Looking for a certified test report for aerospace parts AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
K I’m looking for a square probe for my linear height gauge Manufacturing and Related Processes 1
C Looking for China Good manufacturing practice China Medical Device Regulations 1
M Is Harmonised EN 1041 (Information Supplied By Manufacturer) Worth Looking At? EU Medical Device Regulations 7
DuncanGibbons Looking for example aerospace part CAD files to be used for a case study Career and Occupation Discussions 2
A We're currently looking for any studies performed on various PPE materials Qualification and Validation (including 21 CFR Part 11) 1
C Looking for APQP Training recommendations preferably in the aerospace industry APQP and PPAP 2
M Looking for third party reviewers for FDA submissions US Food and Drug Administration (FDA) 2
C Looking for simple Software Validation IQ templates. Qualification and Validation (including 21 CFR Part 11) 4
H Looking for Tips on finding an IATF consultant Consultants and Consulting 6
pashah Looking for Usability File Template acc. IEC 62366-1 and IEC 60601-1-6 IEC 62366 - Medical Device Usability Engineering 4
pashah Looking for Clinical Evaluation SOP acc. MEDDEV and EU MDR Other Medical Device Related Standards 1
bryan willemot Looking for a good CoC to put with my certification sheets when we send parts Document Control Systems, Procedures, Forms and Templates 1
L I'm looking for Translation Procedure Guide MEDDEV 2.5/5 Rev.2 (NOT Rev.3) CE Marking (Conformité Européene) / CB Scheme 0
K Looking for a good Six Sigma book Six Sigma 7
G Looking to move to an electronic QMS software Software Quality Assurance 11
C Looking for source of silicone contamination in ISO Class 8 Cleanroom Other Medical Device Related Standards 2
F Looking for a Japan MAH recommendation that is not too expensive Japan Medical Device Regulations 5
P Looking for Risk Assessment Template - Not necessarily Asset based IEC 27001 - Information Security Management Systems (ISMS) 1
S Looking for procedure on UDI (Unique Device Identification) 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
J Looking for FMEA plastic injection molding FMEA and Control Plans 8
M Start-Up Company looking for ISO 13485 Certification Body and Medical Device CE Mark Notified Body Registrars and Notified Bodies 6

Similar threads

Top Bottom