Lot Acceptance Plan that specifies BS 6001 Double Sampling Plans, general inspection

P

Petervan

#1
#1
Hi All,
I am hoping someone can provide some assistance on a simple question.
I work in a Defence industry supplier in Australia. Our customer is asking to have defect testing performed on a product supplied (by another supplier, but in the same global group that has had repeated failures in use.

The OEM has provided a proofing specification in the form of a Lot Acceptance Plan that specifies BS 6001 Double Sampling Plans, general inspection II.

Can I use the local version AS 1199? From my understanding, the 2 standards are the same in regards to AQL, lot sizes, recommended sample sizes and the like.

Thanks for the help

Peter
 
GAGEpack - Gage & Calibration Management
Elsmar Forum Sponsor
Bev D

Bev D

Heretical Statistician
Leader
Super Moderator
#2
#2
Re: Lot Acceptance Plan that specifies BS 6001 Double Sampling Plans, general inspect

My advice would be to contact your Customer and gain agreement on the equivalence...

of course the dilemma is that they probably won't take anyone's word for it and would want a direct comparison so 'someone' may have to purchase the referenced standard...
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
K Design of Lot Acceptance Sampling Plan - Zero Acceptance Number Sampling Plans Inspection, Prints (Drawings), Testing, Sampling and Related Topics 27
apestate Acceptance Sampling - Interpretation of "Lot" - DOD DCMA Inspector coming Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
J Change Lot Acceptance Level to one on all plans - Any code of practice? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
R Documenting Quality Inspections - Material Released prior to Lot Acceptance Quality Manager and Management Related Issues 10
S Lot Acceptance Procedure - Material Acceptance Procedure for the supply department Supplier Quality Assurance and other Supplier Issues 3
T Lot acceptance when samples have nonconconformities AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
Q Final Inspection lot failures - AQL based final acceptance AQL - Acceptable Quality Level 3
B 105E/Z1.4 - How do you determine acceptance of an inspected lot? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
E Acceptance Sampling to be used for Lot Acceptance - Destructive Test Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
M Material Heat Number / Lot Number ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
B Validation of FEA Analyses in Oil&Gas Industries. There are a lot of guidelines for other activities. There is a similar proposal for O&G? Design and Development of Products and Processes 0
H A better Lot/bin system Preventive Action and Continuous Improvement 2
T Lot Release Test and Certificate of Analysis 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 6
M ISO 13485: 2016 Lot numbering question ISO 13485:2016 - Medical Device Quality Management Systems 4
shimonv Frequency and sample size for lot release of EtO sterilized products EU Medical Device Regulations 2
shimonv Single lot release for sterile packaging 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
J Sample size definition in an Automotive SMT pilot lot run Misc. Quality Assurance and Business Systems Related Topics 1
Q LOT or Serial Number Symbol not used when the information is contained in the UDI? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
D Supplied Product on Control Plan - Lot ranging in 40,000 pcs per product FMEA and Control Plans 3
Z Do we still have to put UDI if we have DI and lot number seperately on our product ? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
K FDA Lot Code format requirements Other Medical Device and Orthopedic Related Topics 1
R Documenting Expiration Date Extension for a specific lot ISO 13485:2016 - Medical Device Quality Management Systems 12
S Lot assignment for secondary reference standard - Pharmaceuticals Manufacturing and Related Processes 0
N AS9100 8.5.1 j) - Lot splitting - any loopholes? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
S Is Lot Number required in addition to UDI serial number? Other Medical Device Regulations World-Wide 7
I Lot or Batch definition for IVDs Imported Legacy Blogs 0
N IVD Lot Numbers and Expiration Dates - 21 CFR 809.10 Other US Medical Device Regulations 3
J PMA Device - Lot # change in New ERP Software - What are the FDA Requirements 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 0
S Requirements relating to Serial Number and Lot Number Other US Medical Device Regulations 6
V 'Representative' Sample of the Lot for a Continuous Process Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
J Change in Lot Release Specifications - Definition of "Substantial Change" EU Medical Device Regulations 14
M Lot Numbers of Plastic Disposables in an LDT (laboratory developed test) ISO 13485:2016 - Medical Device Quality Management Systems 6
M How to Mathemetically Derive the AQL Tables given Lot Sizes AQL - Acceptable Quality Level 8
M Component Lot Number Traceability - Class I reusable and "resposable" Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 10
D Dual Lot Manufacturing requirements for Clinical Customers Manufacturing and Related Processes 3
R Why the FDA requests Lot Number in Testing Reports 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 7
E Is Design Transfer to Production be complete prior to Release of first production lot 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
G Validating a Process Based on Lot Release Criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
U AQL, Lot Size vs Sampling Plans AQL - Acceptable Quality Level 8
Sam Lazzara Lot Release Testing versus Process Validation Studies Qualification and Validation (including 21 CFR Part 11) 9
V FDA regulatory requirement on the lot number convention for medical devices US Food and Drug Administration (FDA) 2
K Can I use ANSI/AQL for the Total Number of Containers for the entire Lot? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
H How to calculate the Lot Reject Rate Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
A How can a sample can give information about bad products in whole lot? Quality Manager and Management Related Issues 3
M Pipet tips of the same Lot Number have different expiration dates Quality Manager and Management Related Issues 6
L Regulatory Submittal During 3 Lot Sterilization Validation EU Medical Device Regulations 3
C Statistics equation to determine the number of samples in a lot Statistical Analysis Tools, Techniques and SPC 8
K Class Ins CE Mark Labeling Requirements (particularly Lot or Batch symbol and number) EU Medical Device Regulations 7
N Switch to 100% inspection when lot fails sampling? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
G Calculating the Fraction Defective Confidence Interval for a Lot Statistical Analysis Tools, Techniques and SPC 2

Similar threads

Top Bottom