SBS - The best value in QMS software

Machine Capability

#1
Hello,
Looking for some advice with determining a test stand repeatability study. I have done typical Gage R&R on machined components (2x3x10) in the past but in this case I have a test machine where you dial in a resistance and measure an output length (linear movement, seems like two variables). I have been asked to measure the machine repeatability, would this be a 1x1x10, similar to a 1x1x10 done on a CMM i see non a previous post. Any advise would be greatly appreciated.
Thanks,
 
Elsmar Forum Sponsor

Miner

Forum Moderator
Staff member
Admin
#2
I would recommend a Linearity study. This would look at the machine over a range of settings , provide the bias over this range as well as the Equipment Variation (%EV) or repeatability.
 
Thread starter Similar threads Forum Replies Date
S Machine Setup for a CNC Machine Capability Study Capability, Accuracy and Stability - Processes, Machines, etc. 1
A Statistic Tools to Know Capability of Sealing Machine for Seal Width Capability, Accuracy and Stability - Processes, Machines, etc. 3
S Proving Process Capability of a Packing Machine Capability, Accuracy and Stability - Processes, Machines, etc. 6
B Determing Machine Capability in a High Mix, Low Volume Sheet Metal Shop Manufacturing and Related Processes 4
S What is the difference between Process Capability and Machine Capabilty Capability, Accuracy and Stability - Processes, Machines, etc. 13
F Capability for a Injection Mold Machine (35 Cavities) Capability, Accuracy and Stability - Processes, Machines, etc. 17
L Capability studies on machine types - Supplier has over 1000 machines Quality Manager and Management Related Issues 7
L Capability Study for a Honing Machine Statistical Analysis Tools, Techniques and SPC 3
G How to calculate Subgroup Size for Machine Capability Study Statistical Analysis Tools, Techniques and SPC 4
V How to calculate Machine Capability Study using Minitab Using Minitab Software 4
A CQE Exam Machine Capability Question - HELP Capability, Accuracy and Stability - Processes, Machines, etc. 7
K Excel Spreadsheet Template to calculate Cmk (Machine Capability) wanted Capability, Accuracy and Stability - Processes, Machines, etc. 2
I Machine Capability Analysis in Multi-Dimensional Cases Capability, Accuracy and Stability - Processes, Machines, etc. 2
S Machine Capability (Cm) for Plastic Injection Molding Capability, Accuracy and Stability - Processes, Machines, etc. 1
S Machine Capability with Plastic Producers Capability, Accuracy and Stability - Processes, Machines, etc. 1
Q Machine Capability Study - Cpk (Cmk) of an R/F testing machine Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
R How to measure Machine Capability index Cpm Statistical Analysis Tools, Techniques and SPC 1
T Machine GR&R (Gage R&R) - Capability Study Capability, Accuracy and Stability - Processes, Machines, etc. 5
M Cmk (Machine Capability) - Case study Capability, Accuracy and Stability - Processes, Machines, etc. 5
M Machine Tool Calibration - Machine Capability Studies on CNC Machine Tools Manufacturing and Related Processes 5
M Volumetric Positioning - Machine capability studies for CNC machine tools General Measurement Device and Calibration Topics 4
I Reason for pre-production machine/process capability studies / SPC during production Capability, Accuracy and Stability - Processes, Machines, etc. 3
V Machine short term capability study with Cmk index in automotive industry Capability, Accuracy and Stability - Processes, Machines, etc. 3
Y Product Stability (Machine Capability) vs. Equipment Repeatability (Gage R&R) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
S Machine Capability vs. Process Capability - Differences? Capability, Accuracy and Stability - Processes, Machines, etc. 16
M Differences between Machine Capability and Product Capability studies Capability, Accuracy and Stability - Processes, Machines, etc. 9
Q Confused about the machine capability index Cmk Capability, Accuracy and Stability - Processes, Machines, etc. 1
M Is a machine capability the right thing to do Next? Laser measuring machine Capability, Accuracy and Stability - Processes, Machines, etc. 1
S Experience with DOE in machine capability study Capability, Accuracy and Stability - Processes, Machines, etc. 8
M What are the general rules / guidelines when doing a machine capability study? Statistical Analysis Tools, Techniques and SPC 9
A Acceptance criteria for Cmk (machine capability index) Statistical Analysis Tools, Techniques and SPC 3
M How To Conduct Machine Capability Of An Electrical Discharge Machining (edm)? Statistical Analysis Tools, Techniques and SPC 1
M How to Conduct a Machine Capability (Cmk) Study Statistical Analysis Tools, Techniques and SPC 27
S Cmk and Cpk - When will we need to calculate Cmk? Machine Capability Capability, Accuracy and Stability - Processes, Machines, etc. 4
D Machine Capability Studies on CNC Lathes Statistical Analysis Tools, Techniques and SPC 35
S Cmk is defined as a Capability Index for a Stable Machine Capability, Accuracy and Stability - Processes, Machines, etc. 8
D Machine Capability Studies: How many parts needed? Statistical Analysis Tools, Techniques and SPC 11
S How to determine a machine capability? Measuring results for only one shaft APQP and PPAP 1
S How to Determine a Machine Capability? Shaft Fit Tolerance Measurement Results Statistical Analysis Tools, Techniques and SPC 2
M Determining Machine Capability and Process Capability of a Shaft Statistical Analysis Tools, Techniques and SPC 1
D Where can I find Process & Machine Capability study software? Statistical Analysis Tools, Techniques and SPC 3
B SOP for CNC turret punching machine for sheet metal process Manufacturing and Related Processes 0
S Any ISO standards around Artificial Intelligence and Machine Learning? Medical Information Technology, Medical Software and Health Informatics 4
H Software Validation for FFS Packaging Machine Qualification and Validation (including 21 CFR Part 11) 1
M Determining if an Insulin Pen Testing Machine is a Medical Device? EU Medical Device Regulations 4
K Regulatory requirement of SaMD with machine learning component IEC 62304 - Medical Device Software Life Cycle Processes 3
P Need a programmer for QVI's VMS software for optical inspection machine Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
B IQ/OQ/PQ of CNC Milling Machine Qualification and Validation (including 21 CFR Part 11) 2
G Engineering retest in line - Machine stability issues IATF 16949 - Automotive Quality Systems Standard 8
R Machine directory (2006/42/EEC) is applicable or not Other Medical Device Related Standards 0

Similar threads

Top Bottom