Machine Setup for a CNC Machine Capability Study

S

s_am__

Registered
Hi, I am trying to conduct a machine capability study (Cmk) for a CNC machine, anyone can advise on how to prepare the machine for the test? (eg. machine setup verification, suitable time to do it, how to collect the samples)

I am hoping anyone can share on case study on machine capability study (results and analysis and machine setup), just for reference to prepare myself for the study.

Thanks a lot!
 
bobdoering

bobdoering

Stop X-bar/R Madness!!
Trusted Information Resource
I suggest reading through my blogs "Statistical Process Control for Precision Machining". Make sure you get past (and understand how long) your warmup. Then, chart X hi/lo-R data throughout the run. A linear regression of the data past warmup will give you your tool wear rate.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
V Should the Line Clearance include Machine Setup for current Operation? Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 3
O Weighting Problems (Statistics) - Weight distribution for a machine setup Capability, Accuracy and Stability - Processes, Machines, etc. 5
K Setup sheet for machine shop Document Control Systems, Procedures, Forms and Templates 3
Raffy Is my machine setup control plan part of the overall control plan FMEA and Control Plans 2
V Retain machine setup forms from each run? Records and Data - Quality, Legal and Other Evidence 16
N Document Control in Manufacturing - Machine Setup Sheets Document Control Systems, Procedures, Forms and Templates 9
S Low intensity Pulsed Ultasound machine (LIPUS) Medical Device and FDA Regulations and Standards News 2
K Component Placement Per hour in Pick & Place Machine Lean in Manufacturing and Service Industries 3
E Heater-Cooler Unit for Heart-Lung Machine IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
S Gage R&R for inline measuring machine Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
S PPAP machine VS tool Lean in Manufacturing and Service Industries 3
P Validation Methods of Machine learning and Artificial intelligence Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 11
Ashland78 PPAP required for repair of machine? IATF 16949 - Automotive Quality Systems Standard 5
Q Artificial Intelligence/Machine Learning and 62304 IEC 62304 - Medical Device Software Life Cycle Processes 7
H Machine Malfunction & Operator Errors Human Factors and Ergonomics in Engineering 14
was named killer Wire Bonding Machine Provider Approved Vendor? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
D Machine rebuilds versus process re-validation IATF 16949 - Automotive Quality Systems Standard 1
S Calibration Interval calculation for ECG Machine Calibration Frequency (Interval) 4
H FAI Requirement After Moving CNC Machine? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 15
H Traceability after changing the machine IATF 16949 - Automotive Quality Systems Standard 13
K Screen printing ink and machine selection_ Need help Manufacturing and Related Processes 6
P Minimum Distance from Floor to Underneath of Machine Human Factors and Ergonomics in Engineering 5
K PMA vs 510(k) for Mammography Machine US Food and Drug Administration (FDA) 2
E Tensile test machine, tinius olsen 602 Manufacturing and Related Processes 1
M Class II type machine , and its compliance with 60601-1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 14
B SOP for CNC turret punching machine for sheet metal process Manufacturing and Related Processes 0
S Any ISO standards around Artificial Intelligence and Machine Learning? Medical Information Technology, Medical Software and Health Informatics 5
K Machine Capability Capability, Accuracy and Stability - Processes, Machines, etc. 2
H Software Validation for FFS Packaging Machine Qualification and Validation (including 21 CFR Part 11) 1
M Determining if an Insulin Pen Testing Machine is a Medical Device? EU Medical Device Regulations 4
K Regulatory requirement of SaMD with machine learning component IEC 62304 - Medical Device Software Life Cycle Processes 3
P Need a programmer for QVI's VMS software for optical inspection machine Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
B IQ/OQ/PQ of CNC Milling Machine Qualification and Validation (including 21 CFR Part 11) 2
G Engineering retest in line - Machine stability issues IATF 16949 - Automotive Quality Systems Standard 8
R Machine directory (2006/42/EEC) is applicable or not Other Medical Device Related Standards 0
B Product Safety Responsibility - Job shop such as a machine shop AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
Marc The German Enigma Machine of World War II After Work and Weekend Discussion Topics 0
R Revalidation machine line and Stability Studies impact. Medical Device and FDA Regulations and Standards News 3
K Validation of new machine (second machine of the same type) Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 2
P How far an operator can reach into a machine before it becomes an ergonomic problem CE Marking (Conformité Européene) / CB Scheme 5
GreatNate Qualifying a CNC machine Manufacturing and Related Processes 3
C Machine Verification Plan Manufacturing and Related Processes 2
F AS9100D Process Matrix for a small cnc machine shop AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
B Using non CE parts in a machine CE Marking (Conformité Européene) / CB Scheme 1
Marco Bernardi Plane measurement with a 3D touch machine like a CMM. Calibration and Metrology Software and Hardware 6
Marco Bernardi Diameters measurement with 3D touch machine like a CMM Calibration and Metrology Software and Hardware 4
S Companies that maintain your machine should be in ASL? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
GoSpeedRacer Veterinary anesthesia machine CE Marking (Conformité Européene) / CB Scheme 1
H Should I mention machine/Equipment password In SOP? Qualification and Validation (including 21 CFR Part 11) 4
R How to properly use Survival Analysis to predict time to machine failure Reliability Analysis - Predictions, Testing and Standards 0

Similar threads

Top Bottom