Machined Parts PFMEA - Example of a CNC produced part PFMEA wanted

C

Chuck1708

#1
Does anyone have example of a CNC produced part PFMEA that I can
reference.
 
Last edited by a moderator:
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#2
I doubt there is one here, but have you checked/searched the file attachments list?

You might want to bump this thread if you don't hear anything in a day. I know there are people visiting who are CNC peope so I would hope someone could help out with an example. But - This is a relatively specific document you're looking for so we can't promise anything.
 
Thread starter Similar threads Forum Replies Date
M Example - PFMEA for Machined Parts on CNC Mills & Lathes FMEA and Control Plans 3
Ron Rompen 2D matrix issue - Parts (machined steel) returned from the customer Design and Development of Products and Processes 0
C O-Ring Groove Measurement Method in CNC Machined Parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
Ron Rompen Sintered Metal Machined Parts Rust Removal Methods Manufacturing and Related Processes 8
G Visual Inspection of Machined Parts - Best Methods Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
K Is there any specific Standard on visual defects for extrusion and machined parts ? Quality Tools, Improvement and Analysis 6
E Predicting Machined Components Capability based on Historical Data of Similar Parts Capability, Accuracy and Stability - Processes, Machines, etc. 1
M Masking Machined Parts without using MEK (Methyl Ethyl Ketone) Manufacturing and Related Processes 5
L Visual Acceptance test for machined and vapor polished polycarbonate parts Other Medical Device and Orthopedic Related Topics 1
P AS9100 and Final Inspection of Machined Parts AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
R Is 100% Inspected Lot of Machined Parts requires Cp > 1.67 Misc. Quality Assurance and Business Systems Related Topics 15
E Help with PPAP Level 3 for a small company! Machined parts APQP and PPAP 5
Q FAI Help - Subcontracting out all manufactured items (PCB & machined parts) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
S Calibration required? We buy part of our machined parts - Supplier gage calibration? General Measurement Device and Calibration Topics 6
D Is it acceptable to use a checklist for inspection of machined parts from supplier? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
T SPC and GD&T - Machined parts - Is Cpk is the correct index? Capability, Accuracy and Stability - Processes, Machines, etc. 30
T Corrosion in Bores after Zinc Plating machined Iron Castings in VCI Bags Manufacturing and Related Processes 1
KyloDen Checking Threads - Discrepancy in threads that are machined In-House vs. Outsourced General Measurement Device and Calibration Topics 11
Q Heat Treat Steel, Rockwell C - Variability in Complex Machined Shapes Manufacturing and Related Processes 7
P Surface Finish measurement for machined (finished) component/part Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
J Measuring a shallow OD of a Machined Ring/Groove Inspection, Prints (Drawings), Testing, Sampling and Related Topics 14
W Are Purchased Machined Components an "Outsourced Process"? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
U Variables Control Chart options - Tightly toleranced machined components Statistical Analysis Tools, Techniques and SPC 1
R Hand tool to measure angles that has been machined into stock Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
M How clean is clean and how do you know? Small machined aluminum part Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
A Sampling Method for CNC Machined Products Inspection, Prints (Drawings), Testing, Sampling and Related Topics 15
ScottK Surface Finish on machined brass (or other metals)- Attribute or Variable inspection? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
S Soldering in stainless steel machined part Manufacturing and Related Processes 7
B Sharp Edge Measurement - Method of measuring how sharp the edge of a machined part is Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
S Identification of Machined Products between Processes - Solution Needed. Manufacturing and Related Processes 7
ScottK Detecting non-visible defects in machined brass - Where to start? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 19
R PPAP from Customer for Customer Supplied Product - Material to be machined APQP and PPAP 2
D Suggestions for Ishikawa for hyperdetailed customer - plastic molding automotive parts Nonconformance and Corrective Action 9
R Is a FAIR required on parts that we design? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
C Packaging Long Parts Manufacturing and Related Processes 3
D Separation of F-type applied part and remaining parts IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
John C. Abnet VDA 6.3 - Question 7.3 - "blocking of parts" VDA Standards - Germany's Automotive Standards 6
I When is necessary to have RoHS declaration on non-electrical parts? REACH and RoHS Conversations 1
Z Rapid audit template for plastic parts manufacturing process Manufacturing and Related Processes 12
C Scrapping on production floor - Setup parts 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
G Bad Parts cause Customer line stop IATF 16949 - Automotive Quality Systems Standard 13
G Calibration of "Master Parts" Used as Gauges Calibration Frequency (Interval) 5
P FDA Approved Product Contact Parts ISO 13485:2016 - Medical Device Quality Management Systems 6
M Identifying Applied Parts IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
M Nonconforming parts accepted by operator with intention Human Factors and Ergonomics in Engineering 33
J Mechanical inspection techniques of close tolerance parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
J Sister-company providing parts is only ISO 9001 registered IATF 16949 - Automotive Quality Systems Standard 7
A AS9100D 8.1.4 Prevention of Counterfeit Parts AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
C Difficulties getting RoHS/REACH for cheap parts RoHS, REACH, ELV, IMDS and Restricted Substances 1
G Same parts but new customer - What will the auditor ask me? IATF 16949 - Automotive Quality Systems Standard 2

Similar threads

Top Bottom