Machines in Europe not in compliance with the EC directive

Ettore

Quite Involved in Discussions
#1
What happens or should happen if a company uses machines in Europe not in compliance with the EC directive.
Tell us about your experiences here (what do the authorities do, let them run? Do they stop the installations?)
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
K CE Mark in Material Testing Machines sold to Europe from the US CE Marking (Conformité Européene) / CB Scheme 3
M Lean: Conducting Capacity Study, calculating Cycle times on laser cutting machines Lean in Manufacturing and Service Industries 2
P Conformance for Machines Exported to North America CE Marking (Conformité Européene) / CB Scheme 0
A Electric terminal crimping machines - Is SPC appropriate for this process? Manufacturing and Related Processes 4
P IATF 16949 MSA Studies for CMM machines IATF 16949 - Automotive Quality Systems Standard 3
A ISO 9001 Control of Production Equipment - CNC Machines ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
F Standards for testing of adhesive electrodes for use with TENS machines IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
L Machines can't go down at all...... Management wants statement Manufacturing and Related Processes 31
W Reproducibility on Different Machines of the same Configuration Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
L Why are some EMS machines not certified under MDD Other Medical Device and Orthopedic Related Topics 3
J How to Calculate OEE Indicator for a Workshop (15 Machines) Lean in Manufacturing and Service Industries 6
A PUWER (Provision and Use of Work Equipment Regulations) and old machines (UK rules) Occupational Health & Safety Management Standards 4
J Validating multiple injection molding machines efficiently ISO 13485:2016 - Medical Device Quality Management Systems 5
B Long Term Process Capability from miltiple Machines and Fixtures Capability, Accuracy and Stability - Processes, Machines, etc. 3
F Comparison of 2 CMM machines using Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
L Capability studies on machine types - Supplier has over 1000 machines Quality Manager and Management Related Issues 7
M PPAP requirements when adding Part Transfer Robots between Machines APQP and PPAP 1
bobdoering Capability of new CNC machines Capability, Accuracy and Stability - Processes, Machines, etc. 32
A China's Standards for ECG Machines China Medical Device Regulations 0
J MSA For Solder Paste Inspection Machines Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 16
E Anyone familar with Microcatheter Manufacturing Machines Manufacturing and Related Processes 1
T Design & Development in Updating Machines and Equipment - ISO 9001 Help Design and Development of Products and Processes 4
R FMEA Detection Ranking for Testing Machines FMEA and Control Plans 8
Q Temporary Control of Scrap at the Machines while the Process is Running Nonconformance and Corrective Action 6
J Positive Control of Non Conforming Material at Machines AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
W ISO 23125 - Machine Tools Safety - Turning Machines Occupational Health & Safety Management Standards 2
A Moving Equipment (Injection Molding Machines) in the Plant - Revalidation Required? ISO 13485:2016 - Medical Device Quality Management Systems 7
C Is Cycle Time different between Parallel Machines and Single? Lean in Manufacturing and Service Industries 9
C Non-Invasive Medical Device Machines - Singapore Registration Other Medical Device and Orthopedic Related Topics 4
somashekar Information sharing: Week 21, 2010 (MOTORS, MACHINES AND LUBRICATION) The Reading Room 0
C Design and Manufacture of Tortilla Production Machines Manufacturing and Related Processes 5
B SMED in a vertical CNC Lathe Workstation consisting of 3 similar machines Lean in Manufacturing and Service Industries 2
C Special SPC Software for Pneumatic Assembly Machines Statistical Analysis Tools, Techniques and SPC 2
G Calibration of Temperature, Pressure Displays of Molding Machines General Measurement Device and Calibration Topics 13
T Supplier Audit - Supplier of Haemodialysis machines ISO 13485:2016 - Medical Device Quality Management Systems 5
6 Badly Performing Packaging Machines Manufacturing and Related Processes 1
S Can GR&R (Gage R&R) be done between two machines Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
A AS9100 7.5.1.3 Control of .... Numerical NC/CNC Machines Programs. AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
F XRF Capabilities - Correlating 2 different XRF machines - Ni/Au parts Capability, Accuracy and Stability - Processes, Machines, etc. 7
V Looking for Ergonomics Advice - Operators will run two machines simultaneously Human Factors and Ergonomics in Engineering 13
S Calibration of SMT (Surface Mount) Assembly Machines Calibration Frequency (Interval) 13
S How to carry out Gage R&R for automatic machines? Automated Equipment Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 22
M Brass, Bronze & Copper. Will their chips or powder be harmful to CNC Machines? Manufacturing and Related Processes 4
J To PPAP or Not? Comparing two machines (one old and one new) APQP and PPAP 6
ScottK NIST comes out against DRE voting machines. Coffee Break and Water Cooler Discussions 7
A Failure Data of Cathode Stripping Machines - Reliability from the data attached Reliability Analysis - Predictions, Testing and Standards 7
J Internal Audit of Tool and Assembly Department - Fastening Tools, Guns and Machines Internal Auditing 1
S Sample Quality Manual - Special Machines & Fixtures Manufacturing & Design Company Document Control Systems, Procedures, Forms and Templates 9
S Project Management QMS - Manufacturing and Designing of Special Purposed Machines Design and Development of Products and Processes 5
M Charting Bi, Tri or More Modal Distributions to combine results from two machines Capability, Accuracy and Stability - Processes, Machines, etc. 5

Similar threads

Top Bottom